A CO-SIMULATION ENVIRONMENT FOR MIXED SIGNAL, MULTI-DOMAIN SYSTEM LEVEL DESIGN EXPLORATION

This thesis presents a system-level co-simulation environment for mixed domain design exploration. By employing shared memory IPC (Inter-Process Communication) and utilizing PDES (Parallel Discrete Event Simulation) techniques, we examine two methods of synchronization, lock-step and dynamic. We then compare the performance of these two methods on a series of test systems as well as real designs using the Chatoyant MOEMS (Micro-Electro Mechanical Systems) simulator and the mixed HDL (Hardware Description Language) simulator from Model Technology, ModelSim. The results collected are used to ascertain which method provides the best overall performance with the least overhead

Dependability-driven Strategies to Improve the Design and Verification of Safety-Critical HDL-based Embedded Systems

[ES] La utilización de sistemas empotrados en cada vez más ámbitos de aplicación está llevando a que su diseño deba enfrentarse a mayores requisitos de rendimiento, consumo de energía y área (PPA). Asimismo, su utilización en aplicaciones críticas provoca que deban cumplir con estrictos requisitos de confiabilidad para garantizar su correcto funcionamiento durante períodos prolongados de tiempo. En particular, el uso de dispositivos lógicos programables de tipo FPGA es un gran desafío desde la perspectiva de la confiabilidad, ya que estos dispositivos son muy sensibles a la radiación. Por todo ello, la confiabilidad debe considerarse como uno de los criterios principales para la toma de decisiones a lo largo del todo flujo de diseño, que debe complementarse con diversos procesos que permitan alcanzar estrictos requisitos de confiabilidad. Primero, la evaluación de la robustez del diseño permite identificar sus puntos débiles, guiando así la definición de mecanismos de tolerancia a fallos. Segundo, la eficacia de los mecanismos definidos debe validarse experimentalmente. Tercero, la evaluación comparativa de la confiabilidad permite a los diseñadores seleccionar los componentes prediseñados (IP), las tecnologías de implementación y las herramientas de diseño (EDA) más adecuadas desde la perspectiva de la confiabilidad. Por último, la exploración del espacio de diseño (DSE) permite configurar de manera óptima los componentes y las herramientas seleccionados, mejorando así la confiabilidad y las métricas PPA de la implementación resultante. Todos los procesos anteriormente mencionados se basan en técnicas de inyección de fallos para evaluar la robustez del sistema diseñado. A pesar de que existe una amplia variedad de técnicas de inyección de fallos, varias problemas aún deben abordarse para cubrir las necesidades planteadas en el flujo de diseño. Aquellas soluciones basadas en simulación (SBFI) deben adaptarse a los modelos de nivel de implementación, teniendo en cuenta la arquitectura de los diversos componentes de la tecnología utilizada. Las técnicas de inyección de fallos basadas en FPGAs (FFI) deben abordar problemas relacionados con la granularidad del análisis para poder localizar los puntos débiles del diseño. Otro desafío es la reducción del coste temporal de los experimentos de inyección de fallos. Debido a la alta complejidad de los diseños actuales, el tiempo experimental dedicado a la evaluación de la confiabilidad puede ser excesivo incluso en aquellos escenarios más simples, mientras que puede ser inviable en aquellos procesos relacionados con la evaluación de múltiples configuraciones alternativas del diseño. Por último, estos procesos orientados a la confiabilidad carecen de un soporte instrumental que permita cubrir el flujo de diseño con toda su variedad de lenguajes de descripción de hardware, tecnologías de implementación y herramientas de diseño. Esta tesis aborda los retos anteriormente mencionados con el fin de integrar, de manera eficaz, estos procesos orientados a la confiabilidad en el flujo de diseño. Primeramente, se proponen nuevos métodos de inyección de fallos que permiten una evaluación de la confiabilidad, precisa y detallada, en diferentes niveles del flujo de diseño. Segundo, se definen nuevas técnicas para la aceleración de los experimentos de inyección que mejoran su coste temporal. Tercero, se define dos estrategias DSE que permiten configurar de manera óptima (desde la perspectiva de la confiabilidad) los componentes IP y las herramientas EDA, con un coste experimental mínimo. Cuarto, se propone un kit de herramientas que automatiza e incorpora con eficacia los procesos orientados a la confiabilidad en el flujo de diseño semicustom. Finalmente, se demuestra la utilidad y eficacia de las propuestas mediante un caso de estudio en el que se implementan tres procesadores empotrados en un FPGA de Xilinx serie 7.[CA] La utilització de sistemes encastats en cada vegada més àmbits d'aplicació està portant al fet que el seu disseny haja d'enfrontar-se a majors requisits de rendiment, consum d'energia i àrea (PPA). Així mateix, la seua utilització en aplicacions crítiques provoca que hagen de complir amb estrictes requisits de confiabilitat per a garantir el seu correcte funcionament durant períodes prolongats de temps. En particular, l'ús de dispositius lògics programables de tipus FPGA és un gran desafiament des de la perspectiva de la confiabilitat, ja que aquests dispositius són molt sensibles a la radiació. Per tot això, la confiabilitat ha de considerar-se com un dels criteris principals per a la presa de decisions al llarg del tot flux de disseny, que ha de complementar-se amb diversos processos que permeten aconseguir estrictes requisits de confiabilitat. Primer, l'avaluació de la robustesa del disseny permet identificar els seus punts febles, guiant així la definició de mecanismes de tolerància a fallades. Segon, l'eficàcia dels mecanismes definits ha de validar-se experimentalment. Tercer, l'avaluació comparativa de la confiabilitat permet als dissenyadors seleccionar els components predissenyats (IP), les tecnologies d'implementació i les eines de disseny (EDA) més adequades des de la perspectiva de la confiabilitat. Finalment, l'exploració de l'espai de disseny (DSE) permet configurar de manera òptima els components i les eines seleccionats, millorant així la confiabilitat i les mètriques PPA de la implementació resultant. Tots els processos anteriorment esmentats es basen en tècniques d'injecció de fallades per a poder avaluar la robustesa del sistema dissenyat. A pesar que existeix una àmplia varietat de tècniques d'injecció de fallades, diverses problemes encara han d'abordar-se per a cobrir les necessitats plantejades en el flux de disseny. Aquelles solucions basades en simulació (SBFI) han d'adaptar-se als models de nivell d'implementació, tenint en compte l'arquitectura dels diversos components de la tecnologia utilitzada. Les tècniques d'injecció de fallades basades en FPGAs (FFI) han d'abordar problemes relacionats amb la granularitat de l'anàlisi per a poder localitzar els punts febles del disseny. Un altre desafiament és la reducció del cost temporal dels experiments d'injecció de fallades. A causa de l'alta complexitat dels dissenys actuals, el temps experimental dedicat a l'avaluació de la confiabilitat pot ser excessiu fins i tot en aquells escenaris més simples, mentre que pot ser inviable en aquells processos relacionats amb l'avaluació de múltiples configuracions alternatives del disseny. Finalment, aquests processos orientats a la confiabilitat manquen d'un suport instrumental que permeta cobrir el flux de disseny amb tota la seua varietat de llenguatges de descripció de maquinari, tecnologies d'implementació i eines de disseny. Aquesta tesi aborda els reptes anteriorment esmentats amb la finalitat d'integrar, de manera eficaç, aquests processos orientats a la confiabilitat en el flux de disseny. Primerament, es proposen nous mètodes d'injecció de fallades que permeten una avaluació de la confiabilitat, precisa i detallada, en diferents nivells del flux de disseny. Segon, es defineixen noves tècniques per a l'acceleració dels experiments d'injecció que milloren el seu cost temporal. Tercer, es defineix dues estratègies DSE que permeten configurar de manera òptima (des de la perspectiva de la confiabilitat) els components IP i les eines EDA, amb un cost experimental mínim. Quart, es proposa un kit d'eines (DAVOS) que automatitza i incorpora amb eficàcia els processos orientats a la confiabilitat en el flux de disseny semicustom. Finalment, es demostra la utilitat i eficàcia de les propostes mitjançant un cas d'estudi en el qual s'implementen tres processadors encastats en un FPGA de Xilinx serie 7.[EN] Embedded systems are steadily extending their application areas, dealing with increasing requirements in performance, power consumption, and area (PPA). Whenever embedded systems are used in safety-critical applications, they must also meet rigorous dependability requirements to guarantee their correct operation during an extended period of time. Meeting these requirements is especially challenging for those systems that are based on Field Programmable Gate Arrays (FPGAs), since they are very susceptible to Single Event Upsets. This leads to increased dependability threats, especially in harsh environments. In such a way, dependability should be considered as one of the primary criteria for decision making throughout the whole design flow, which should be complemented by several dependability-driven processes. First, dependability assessment quantifies the robustness of hardware designs against faults and identifies their weak points. Second, dependability-driven verification ensures the correctness and efficiency of fault mitigation mechanisms. Third, dependability benchmarking allows designers to select (from a dependability perspective) the most suitable IP cores, implementation technologies, and electronic design automation (EDA) tools. Finally, dependability-aware design space exploration (DSE) allows to optimally configure the selected IP cores and EDA tools to improve as much as possible the dependability and PPA features of resulting implementations. The aforementioned processes rely on fault injection testing to quantify the robustness of the designed systems. Despite nowadays there exists a wide variety of fault injection solutions, several important problems still should be addressed to better cover the needs of a dependability-driven design flow. In particular, simulation-based fault injection (SBFI) should be adapted to implementation-level HDL models to take into account the architecture of diverse logic primitives, while keeping the injection procedures generic and low-intrusive. Likewise, the granularity of FPGA-based fault injection (FFI) should be refined to the enable accurate identification of weak points in FPGA-based designs. Another important challenge, that dependability-driven processes face in practice, is the reduction of SBFI and FFI experimental effort. The high complexity of modern designs raises the experimental effort beyond the available time budgets, even in simple dependability assessment scenarios, and it becomes prohibitive in presence of alternative design configurations. Finally, dependability-driven processes lack an instrumental support covering the semicustom design flow in all its variety of description languages, implementation technologies, and EDA tools. Existing fault injection tools only partially cover the individual stages of the design flow, being usually specific to a particular design representation level and implementation technology. This work addresses the aforementioned challenges by efficiently integrating dependability-driven processes into the design flow. First, it proposes new SBFI and FFI approaches that enable an accurate and detailed dependability assessment at different levels of the design flow. Second, it improves the performance of dependability-driven processes by defining new techniques for accelerating SBFI and FFI experiments. Third, it defines two DSE strategies that enable the optimal dependability-aware tuning of IP cores and EDA tools, while reducing as much as possible the robustness evaluation effort. Fourth, it proposes a new toolkit (DAVOS) that automates and seamlessly integrates the aforementioned dependability-driven processes into the semicustom design flow. Finally, it illustrates the usefulness and efficiency of these proposals through a case study consisting of three soft-core embedded processors implemented on a Xilinx 7-series SoC FPGA.Tuzov, I. (2020). Dependability-driven Strategies to Improve the Design and Verification of Safety-Critical HDL-based Embedded Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/159883TESI

High Performance Computing via High Level Synthesis

As more and more powerful integrated circuits are appearing on the market, more and more applications, with very different requirements and workloads, are making use of the available computing power. This thesis is in particular devoted to High Performance Computing applications, where those trends are carried to the extreme. In this domain, the primary aspects to be taken into consideration are (1) performance (by definition) and (2) energy consumption (since operational costs dominate over procurement costs). These requirements can be satisfied more easily by deploying heterogeneous platforms, which include CPUs, GPUs and FPGAs to provide a broad range of performance and energy-per-operation choices. In particular, as we will see, FPGAs clearly dominate both CPUs and GPUs in terms of energy, and can provide comparable performance. An important aspect of this trend is of course design technology, because these applications were traditionally programmed in high-level languages, while FPGAs required low-level RTL design. The OpenCL (Open Computing Language) developed by the Khronos group enables developers to program CPU, GPU and recently FPGAs using functionally portable (but sadly not performance portable) source code which creates new possibilities and challenges both for research and industry. FPGAs have been always used for mid-size designs and ASIC prototyping thanks to their energy efficient and flexible hardware architecture, but their usage requires hardware design knowledge and laborious design cycles. Several approaches are developed and deployed to address this issue and shorten the gap between software and hardware in FPGA design flow, in order to enable FPGAs to capture a larger portion of the hardware acceleration market in data centers. Moreover, FPGAs usage in data centers is growing already, regardless of and in addition to their use as computational accelerators, because they can be used as high performance, low power and secure switches inside data-centers. High-Level Synthesis (HLS) is the methodology that enables designers to map their applications on FPGAs (and ASICs). It synthesizes parallel hardware from a model originally written C-based programming languages .e.g. C/C++, SystemC and OpenCL. Design space exploration of the variety of implementations that can be obtained from this C model is possible through wide range of optimization techniques and directives, e.g. to pipeline loops and partition memories into multiple banks, which guide RTL generation toward application dependent hardware and benefit designers from flexible parallel architecture of FPGAs. Model Based Design (MBD) is a high-level and visual process used to generate implementations that solve mathematical problems through a varied set of IP-blocks. MBD enables developers with different expertise, e.g. control theory, embedded software development, and hardware design to share a common design framework and contribute to a shared design using the same tool. Simulink, developed by MATLAB, is a model based design tool for simulation and development of complex dynamical systems. Moreover, Simulink embedded code generators can produce verified C/C++ and HDL code from the graphical model. This code can be used to program micro-controllers and FPGAs. This PhD thesis work presents a study using automatic code generator of Simulink to target Xilinx FPGAs using both HDL and C/C++ code to demonstrate capabilities and challenges of high-level synthesis process. To do so, firstly, digital signal processing unit of a real-time radar application is developed using Simulink blocks. Secondly, generated C based model was used for high level synthesis process and finally the implementation cost of HLS is compared to traditional HDL synthesis using Xilinx tool chain. Alternative to model based design approach, this work also presents an analysis on FPGA programming via high-level synthesis techniques for computationally intensive algorithms and demonstrates the importance of HLS by comparing performance-per-watt of GPUs(NVIDIA) and FPGAs(Xilinx) manufactured in the same node running standard OpenCL benchmarks. We conclude that generation of high quality RTL from OpenCL model requires stronger hardware background with respect to the MBD approach, however, the availability of a fast and broad design space exploration ability and portability of the OpenCL code, e.g. to CPUs and GPUs, motivates FPGA industry leaders to provide users with OpenCL software development environment which promises FPGA programming in CPU/GPU-like fashion. Our experiments, through extensive design space exploration(DSE), suggest that FPGAs have higher performance-per-watt with respect to two high-end GPUs manufactured in the same technology(28 nm). Moreover, FPGAs with more available resources and using a more modern process (20 nm) can outperform the tested GPUs while consuming much less power at the cost of more expensive devices

New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded Designs

Tesis por compendio[EN] Relevance of electronics towards safety of common devices has only been growing, as an ever growing stake of the functionality is assigned to them. But of course, this comes along the constant need for higher performances to fulfill such functionality requirements, while keeping power and budget low. In this scenario, industry is struggling to provide a technology which meets all the performance, power and price specifications, at the cost of an increased vulnerability to several types of known faults or the appearance of new ones. To provide a solution for the new and growing faults in the systems, designers have been using traditional techniques from safety-critical applications, which offer in general suboptimal results. In fact, modern embedded architectures offer the possibility of optimizing the dependability properties by enabling the interaction of hardware, firmware and software levels in the process. However, that point is not yet successfully achieved. Advances in every level towards that direction are much needed if flexible, robust, resilient and cost effective fault tolerance is desired. The work presented here focuses on the hardware level, with the background consideration of a potential integration into a holistic approach. The efforts in this thesis have focused several issues: (i) to introduce additional fault models as required for adequate representativity of physical effects blooming in modern manufacturing technologies, (ii) to provide tools and methods to efficiently inject both the proposed models and classical ones, (iii) to analyze the optimum method for assessing the robustness of the systems by using extensive fault injection and later correlation with higher level layers in an effort to cut development time and cost, (iv) to provide new detection methodologies to cope with challenges modeled by proposed fault models, (v) to propose mitigation strategies focused towards tackling such new threat scenarios and (vi) to devise an automated methodology for the deployment of many fault tolerance mechanisms in a systematic robust way. The outcomes of the thesis constitute a suite of tools and methods to help the designer of critical systems in his task to develop robust, validated, and on-time designs tailored to his application.[ES] La relevancia que la electrónica adquiere en la seguridad de los productos ha crecido inexorablemente, puesto que cada vez ésta copa una mayor influencia en la funcionalidad de los mismos. Pero, por supuesto, este hecho viene acompañado de una necesidad constante de mayores prestaciones para cumplir con los requerimientos funcionales, al tiempo que se mantienen los costes y el consumo en unos niveles reducidos. En este escenario, la industria está realizando esfuerzos para proveer una tecnología que cumpla con todas las especificaciones de potencia, consumo y precio, a costa de un incremento en la vulnerabilidad a múltiples tipos de fallos conocidos o la introducción de nuevos. Para ofrecer una solución a los fallos nuevos y crecientes en los sistemas, los diseñadores han recurrido a técnicas tradicionalmente asociadas a sistemas críticos para la seguridad, que ofrecen en general resultados sub-óptimos. De hecho, las arquitecturas empotradas modernas ofrecen la posibilidad de optimizar las propiedades de confiabilidad al habilitar la interacción de los niveles de hardware, firmware y software en el proceso. No obstante, ese punto no está resulto todavía. Se necesitan avances en todos los niveles en la mencionada dirección para poder alcanzar los objetivos de una tolerancia a fallos flexible, robusta, resiliente y a bajo coste. El trabajo presentado aquí se centra en el nivel de hardware, con la consideración de fondo de una potencial integración en una estrategia holística. Los esfuerzos de esta tesis se han centrado en los siguientes aspectos: (i) la introducción de modelos de fallo adicionales requeridos para la representación adecuada de efectos físicos surgentes en las tecnologías de manufactura actuales, (ii) la provisión de herramientas y métodos para la inyección eficiente de los modelos propuestos y de los clásicos, (iii) el análisis del método óptimo para estudiar la robustez de sistemas mediante el uso de inyección de fallos extensiva, y la posterior correlación con capas de más alto nivel en un esfuerzo por recortar el tiempo y coste de desarrollo, (iv) la provisión de nuevos métodos de detección para cubrir los retos planteados por los modelos de fallo propuestos, (v) la propuesta de estrategias de mitigación enfocadas hacia el tratamiento de dichos escenarios de amenaza y (vi) la introducción de una metodología automatizada de despliegue de diversos mecanismos de tolerancia a fallos de forma robusta y sistemática. Los resultados de la presente tesis constituyen un conjunto de herramientas y métodos para ayudar al diseñador de sistemas críticos en su tarea de desarrollo de diseños robustos, validados y en tiempo adaptados a su aplicación.[CA] La rellevància que l'electrònica adquireix en la seguretat dels productes ha crescut inexorablement, puix cada volta més aquesta abasta una major influència en la funcionalitat dels mateixos. Però, per descomptat, aquest fet ve acompanyat d'un constant necessitat de majors prestacions per acomplir els requeriments funcionals, mentre es mantenen els costos i consums en uns nivells reduïts. Donat aquest escenari, la indústria està fent esforços per proveir una tecnologia que complisca amb totes les especificacions de potència, consum i preu, tot a costa d'un increment en la vulnerabilitat a diversos tipus de fallades conegudes, i a la introducció de nous tipus. Per oferir una solució a les noves i creixents fallades als sistemes, els dissenyadors han recorregut a tècniques tradicionalment associades a sistemes crítics per a la seguretat, que en general oferixen resultats sub-òptims. De fet, les arquitectures empotrades modernes oferixen la possibilitat d'optimitzar les propietats de confiabilitat en habilitar la interacció dels nivells de hardware, firmware i software en el procés. Tot i això eixe punt no està resolt encara. Es necessiten avanços a tots els nivells en l'esmentada direcció per poder assolir els objectius d'una tolerància a fallades flexible, robusta, resilient i a baix cost. El treball ací presentat se centra en el nivell de hardware, amb la consideració de fons d'una potencial integració en una estratègia holística. Els esforços d'esta tesi s'han centrat en els següents aspectes: (i) la introducció de models de fallada addicionals requerits per a la representació adequada d'efectes físics que apareixen en les tecnologies de fabricació actuals, (ii) la provisió de ferramentes i mètodes per a la injecció eficient del models proposats i dels clàssics, (iii) l'anàlisi del mètode òptim per estudiar la robustesa de sistemes mitjançant l'ús d'injecció de fallades extensiva, i la posterior correlació amb capes de més alt nivell en un esforç per retallar el temps i cost de desenvolupament, (iv) la provisió de nous mètodes de detecció per cobrir els reptes plantejats pels models de fallades proposats, (v) la proposta d'estratègies de mitigació enfocades cap al tractament dels esmentats escenaris d'amenaça i (vi) la introducció d'una metodologia automatitzada de desplegament de diversos mecanismes de tolerància a fallades de forma robusta i sistemàtica. Els resultats de la present tesi constitueixen un conjunt de ferramentes i mètodes per ajudar el dissenyador de sistemes crítics en la seua tasca de desenvolupament de dissenys robustos, validats i a temps adaptats a la seua aplicació.Espinosa García, J. (2016). New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded Designs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73146TESISCompendi

An Effective Verification Solution for Modern Microprocessors.

Over the past four decades microprocessors have come to be a vital and inseparable part of the modern world, becoming the digital brain of numerous electronic devices and gadgets that make today's lifestyle possible. Processors are capable of performing computation at astonishingly high speeds and are extremely integrated, occupying only a few square centimeters of silicon die. However, this computational power comes at a price: the task of verifying a modern microprocessor and guaranteeing correctness of its operation is increasingly challenging, even for most established processor vendors. Always attempting to deliver higher performance to end-users, processor manufacturers are forced to design progressively more complex circuits and employ immense verification teams to eliminate critical design bugs in a timely manner. Unfortunately, too often size doesn't seem to matter in verification, as schedules continue to slip and microprocessors find their way to the marketplace with design errors. This work describes a novel verification framework targeting specifically today's complex microprocessors. The scope of the work spans many levels of verification and different phases of the processor life-cycle, from validation of individual sub-modules to complete multi-core system, and from pre-silicon design verification to in-the-field hardware patching. In particular, our StressTest and MCjammer approaches enable efficient generation of high-quality tests at the pre-silicon level for individual cores and multi-core systems, respectively, using machine learning techniques and making the process as automatic as possible. On the other hand, Reversi and Dacota enable low cost validation in post-silicon, while delivering even higher coverage than pre-silicon techniques. Finally, the Field-repairable control logic (FRCL) and Caspar techniques allow designers to patch different classes of escaped errors in processors that are deployed in the field. The integrated set of solutions that we introduce with this thesis empowers processor vendors to drastically shorten their development timeline and, at the same time, to deliver more reliable and correct systems to their customers at a lower cost. Altogether, this work has the potential to solve the long-standing challenge of guaranteeing the complete functional correctness of modern microprocessors.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/61656/1/ivagner_1.pd

Cost-Efficient Soft-Error Resiliency for ASIP-based Embedded Systems

Recent decades have witnessed the rapid growth of embedded systems. At present, embedded systems are widely applied in a broad range of critical applications including automotive electronics, telecommunication, healthcare, industrial electronics, consumer electronics military and aerospace. Human society will continue to be greatly transformed by the pervasive deployment of embedded systems. Consequently, substantial amount of efforts from both industry and academic communities have contributed to the research and development of embedded systems. Application-specific instruction-set processor (ASIP) is one of the key advances in embedded processor technology, and a crucial component in some embedded systems. Soft errors have been directly observed since the 1970s. As devices scale, the exponential increase in the integration of computing systems occurs, which leads to correspondingly decrease in the reliability of computing systems. Today, major research forums state that soft errors are one of the major design technology challenges at and beyond the 22 nm technology node. Therefore, a large number of soft-error solutions, including error detection and recovery, have been proposed from differing perspectives. Nonetheless, most of the existing solutions are designed for general or high-performance systems which are different to embedded systems. For embedded systems, the soft-error solutions must be cost-efficient, which requires the tailoring of the processor architecture with respect to the feature of the target application. This thesis embodies a series of explorations for cost-efficient soft-error solutions for ASIP-based embedded systems. In this exploration, five major solutions are proposed. The first proposed solution realizes checkpoint recovery in ASIPs. By generating customized instructions, ASIP-implemented checkpoint recovery can perform at a finer granularity than what was previously possible. The fault-free performance overhead of this solution is only 1.45% on average. The recovery delay is only 62 cycles at the worst case. The area and leakage power overheads are 44.4% and 45.6% on average. The second solution explores utilizing two primitive error recovery techniques jointly. This solution includes three application-specific optimization methodologies. This solution generates the optimized error-resilient ASIPs, based on the characteristics of primitive error recovery techniques, static reliability analysis and design constraints. The resultant ASIP can be configured to perform at runtime according to the optimized recovery scheme. This solution can strategically enhance cost-efficiency for error recovery. In order to guarantee cost-efficiency in unpredictable runtime situations, the third solution explores runtime adaptation for error recovery. This solution aims to budget and adapt the error recovery operations, so as to spend the resources intelligently and to tolerate adverse influences of runtime variations. The resultant ASIP can make runtime decisions to determine the activation of spatial and temporal redundancies, according to the runtime situations. At the best case, this solution can achieve almost 50x reliability gain over the state of the art solutions. Given the increasing demand for multi-core computing systems, the last two proposed solutions target error recovery in multi-core ASIPs. The first solution of these two explores ASIP-implemented fine-grained process migration. This solution is a key infrastructure, which allows cost-efficient task management, for realizing cost-efficient soft-error recovery in multi-core ASIPs. The average time cost is only 289 machine cycles to perform process migration. The last solution explores using dynamic and adaptive mapping to assign heterogeneous recovery operations to the tasks in the multi-core context. This solution allows each individual ASIP-based processing core to dynamically adapt its specific error recovery functionality according to the corresponding task's characteristics, in terms of soft error vulnerability and execution time deadline. This solution can significantly improve the reliability of the system by almost two times, with graceful constraint penalty, in comparison to the state-of-the-art counterparts

FPGA Based Design for Accelerated Fault-testing of Integrated Circuits

In the past few decades, integrated circuits have become a major part of everyday life. Every circuit that is created needs to be tested for faults so faulty circuits are not sent to end-users. The creation of these tests is time consuming, costly and difficult to perform on larger circuits. This research presents a novel method for fault detection and test pattern reduction in integrated circuitry under test. By leveraging the FPGA\u27s reconfigurability and parallel processing capabilities, a speed up in fault detection can be achieved over previous computer simulation techniques. This work presents the following contributions to the field of Stuck-At-Fault detection: We present a new method for inserting faults into a circuit net list. Given any circuit netlist, our tool can insert multiplexers into a circuit at correct internal nodes to aid in fault emulation on reconfigurable hardware. We present a parallel method of fault emulation. The benefit of the FPGA is not only its ability to implement any circuit, but its ability to process data in parallel. This research utilizes this to create a more efficient emulation method that implements numerous copies of the same circuit in the FPGA. A new method to organize the most efficient faults. Most methods for determinin the minimum number of inputs to cover the most faults require sophisticated softwareprograms that use heuristics. By utilizing hardware, this research is able to process data faster and use a simpler method for an efficient way of minimizing inputs

PRODUCTIVELY SCALING HARDWARE DESIGNS OVER INCREASING RESOURCES USING A SYSTEMATIC DESIGN ANALYSIS APPROACH

As processor development shifts from strict single core frequency scaling to het- erogeneous resource scaling two important considerations require evaluation. First, how to design systems with an increasing amount of heterogeneous resources, and second, how to maintain a designer’s productivity as the number of possible con- figurations grows. Therefore, it is necessary to determine what useful information can be gathered from existing designs to help predict or identify a design’s potential scalability, as well as, identifying which routine tasks can be automated to improve a designer’s productivity. Moreover, once this information is collected, how can this information be conveyed to the designer such that it can be used to increase overall productivity when implementing the design over increasing amounts of resources? This research looks at various approaches to analyze designs and attempts to distribute an application efficiently across a heterogeneous cluster of computing re- sources through the use of a Systematic Design Analysis flow and an assortment of productivity tools. These tools provide the designer with projections on the amount of resources needed to scale an existing design to a specified performance, as well as, projecting the performance based on a specified amount of resources. This is accomplished through the combination of static HDL profiling, component synthesis resource utilization, and runtime performance monitoring. For evaluation, four case studies are presented to demonstrate the proposed flow’s scalability on a small scale cluster of FPGAs. The results are highly favorable, providing orders of magnitude speedup with minimal intervention from the designer

RTRLIB : a high-level modeling tool for dynamically partially reconfigurable systems

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2020.Reconfiguração dinâmica parcial é considerada uma interessante técnica a ser aplicada para o aumento da flexibilidade de sistemas implementados em FPGA, em função da implementação dinâmica de módulos de hardware enquanto o restante do circuito permanece em operação. Trata- se de uma técnica utilizada em sistemas com requisitos muito restritos, como adaptabilidade, robustez, consumo de potência, custo e tolerância à falhas. Entretanto, a complexidade de desen- volvimento de sistemas com reconfiguração dinâmica parcial é consideravelmente alta quando comparada à de sistemas com lógica totalmente estática. Nesse sentido, novas metodologias e ferramentas de desenvolvimento são necessárias para reduzir a complexidade de implementação desse tipo de sistema. Nesse contexto, esse trabalho apresenta o RTRLib, uma ferramenta de modelagem em alto nível para o desenvolvimento de sistemas com reconfiguração dinâmica parcial em dispositivos Xilinx Zynq a partir da especificação e parametrização de alguns blocos. Sob condições específi- cas, o RTRLib automaticamante produz os scripts de hardware e software para implementação da solução utilizando o Vivado Design Suite e o SDK. Tais scripts são compostos pelos comandos necessários para a implementação do sistema desde a criação do projeto de hardware até a criação do arquivo de boot. Uma vez que o RTRLib é composto por IP-Cores previamente caracterizados, a ferramenta também pode ser utilizada para a análise, em fase de modelagem, do sistema a ser implementado, por meio da estimação de características importantes do sistema, como o consumo de recursos e latência. O presente trabalho também inclui novas funcionalidades implementadas no RTRLib no con- texto do design de hardware e de software, como: generalização do script de hardware, mapea- mento de IO, floorplanning por meio de uma GUI, criação de um gerador de script de software, gerador de template de aplicação standalone que faz uso do partial reconfiguration controller (PRC) e implementação de uma biblioteca para aplicações FreeRTOS. Por fim, quatro estudos de casos foram implementados para demonstrar as funcionalidades da ferramenta: um sistema de classificação de terrenos baseado em redes neurais, um sistema com regressores lineares utilizado para controle de uma prótese miocinética de mão e, por último, uma aplicação hipotética de um sistema com requisitos de tempo real.Partial dynamic reconfiguration is considered an interesting technique to increase flexibility in FPGA designs due to the dynamic replacement of hardware modules while the remainder of the circuit remains in operation. It is used in systems with hard requirements such as adaptability, robustness, power consumption, cost, and fault-tolerance. However, the complexity to develop dynamically partially reconfigurable systems in considerably higher comparing with static de- signs. Therefore, new design methodologies and tools have been required to reduce the design complexity of such systems. In this context, this work presents the RTRLib, a high-level modeling tool for the development of dynamically reconfigurable systems on Xilinx Zynq devices by a simple system specification and parametrization of some blocks. Under specific conditions, RTRLib automatically generates the hardware and software scripts to implement the solution using Vivado and SDK. These scripts are composed by the sequential design steps from hardware project creation to the boot image elaboration. Since RTRLib is composed of pre-characterized IP-Cores, the tool also can be used to analyze the system behavior during the design process by the early estimation of essential characteristics of the system such as resource consumption and latency. The present work also includes the new functionalities implemented on RTRLib in the context of the hardware and the software design, such as: hardware script generalization, IO mapping, floorplanning by a GUI, software script creation, generator of a standalone template application that uses PRC, and implementation of a FreeRTOS library application. Finally, four case studies were implemented to demonstrate the tool capability: a system for terrain classification based on neuron networks, a linear regressor system used to control a myokinetic-based prosthetic hand, and a hypothetical real-time application