A study of reverse osmosis reject water at Bukit Gambir, Tangkak Haemodialysis Centre

Water is categorized by their few aspects according to the specific feature and it function usage in a certain compatible condition. Yet with rapidly population growth increasing around the world by about 85 million per year, the accessibility for fresh water supply per persons keep declining [1]. The increasing clean water demand causes the increasing environmental risks, costs and economic exploitation as it may disturb surrounding nature which leads into the more distant sources or greater depth. At this state, the minimization of waste water produce should be focused on to prevent it become worsen

Map-Based Localization for Unmanned Aerial Vehicle Navigation

Unmanned Aerial Vehicles (UAVs) require precise pose estimation when navigating in indoor and GNSS-denied / GNSS-degraded outdoor environments. The possibility of crashing in these environments is high, as spaces are confined, with many moving obstacles. There are many solutions for localization in GNSS-denied environments, and many different technologies are used. Common solutions involve setting up or using existing infrastructure, such as beacons, Wi-Fi, or surveyed targets. These solutions were avoided because the cost should be proportional to the number of users, not the coverage area. Heavy and expensive sensors, for example a high-end IMU, were also avoided. Given these requirements, a camera-based localization solution was selected for the sensor pose estimation. Several camera-based localization approaches were investigated. Map-based localization methods were shown to be the most efficient because they close loops using a pre-existing map, thus the amount of data and the amount of time spent collecting data are reduced as there is no need to re-observe the same areas multiple times. This dissertation proposes a solution to address the task of fully localizing a monocular camera onboard a UAV with respect to a known environment (i.e., it is assumed that a 3D model of the environment is available) for the purpose of navigation for UAVs in structured environments. Incremental map-based localization involves tracking a map through an image sequence. When the map is a 3D model, this task is referred to as model-based tracking. A by-product of the tracker is the relative 3D pose (position and orientation) between the camera and the object being tracked. State-of-the-art solutions advocate that tracking geometry is more robust than tracking image texture because edges are more invariant to changes in object appearance and lighting. However, model-based trackers have been limited to tracking small simple objects in small environments. An assessment was performed in tracking larger, more complex building models, in larger environments. A state-of-the art model-based tracker called ViSP (Visual Servoing Platform) was applied in tracking outdoor and indoor buildings using a UAVs low-cost camera. The assessment revealed weaknesses at large scales. Specifically, ViSP failed when tracking was lost, and needed to be manually re-initialized. Failure occurred when there was a lack of model features in the cameras field of view, and because of rapid camera motion. Experiments revealed that ViSP achieved positional accuracies similar to single point positioning solutions obtained from single-frequency (L1) GPS observations standard deviations around 10 metres. These errors were considered to be large, considering the geometric accuracy of the 3D model used in the experiments was 10 to 40 cm. The first contribution of this dissertation proposes to increase the performance of the localization system by combining ViSP with map-building incremental localization, also referred to as simultaneous localization and mapping (SLAM). Experimental results in both indoor and outdoor environments show sub-metre positional accuracies were achieved, while reducing the number of tracking losses throughout the image sequence. It is shown that by integrating model-based tracking with SLAM, not only does SLAM improve model tracking performance, but the model-based tracker alleviates the computational expense of SLAMs loop closing procedure to improve runtime performance. Experiments also revealed that ViSP was unable to handle occlusions when a complete 3D building model was used, resulting in large errors in its pose estimates. The second contribution of this dissertation is a novel map-based incremental localization algorithm that improves tracking performance, and increases pose estimation accuracies from ViSP. The novelty of this algorithm is the implementation of an efficient matching process that identifies corresponding linear features from the UAVs RGB image data and a large, complex, and untextured 3D model. The proposed model-based tracker improved positional accuracies from 10 m (obtained with ViSP) to 46 cm in outdoor environments, and improved from an unattainable result using VISP to 2 cm positional accuracies in large indoor environments. The main disadvantage of any incremental algorithm is that it requires the camera pose of the first frame. Initialization is often a manual process. The third contribution of this dissertation is a map-based absolute localization algorithm that automatically estimates the camera pose when no prior pose information is available. The method benefits from vertical line matching to accomplish a registration procedure of the reference model views with a set of initial input images via geometric hashing. Results demonstrate that sub-metre positional accuracies were achieved and a proposed enhancement of conventional geometric hashing produced more correct matches - 75% of the correct matches were identified, compared to 11%. Further the number of incorrect matches was reduced by 80%

Oral application of L-menthol in the heat: From pleasure to performance

When menthol is applied to the oral cavity it presents with a familiar refreshing sensation and cooling mint flavour. This may be deemed hedonic in some individuals, but may cause irritation in others. This variation in response is likely dependent upon trigeminal sensitivity toward cold stimuli, suggesting a need for a menthol solution that can be easily personalised. Menthol’s characteristics can also be enhanced by matching colour to qualitative outcomes; a factor which can easily be manipulated by practitioners working in athletic or occupational settings to potentially enhance intervention efficacy. This presentation will outline the efficacy of oral menthol application for improving time trial performance to date, either via swilling or via co-ingestion with other cooling strategies, with an emphasis upon how menthol can be applied in ecologically valid scenarios. Situations in which performance is not expected to be enhanced will also be discussed. An updated model by which menthol may prove hedonic, satiate thirst and affect ventilation will also be presented, with the potential performance implications of these findings discussed and modelled. Qualitative reflections from athletes that have implemented menthol mouth swilling in competition, training and maximal exercise will also be included

Evolutionary Algorithms for Reinforcement Learning

There are two distinct approaches to solving reinforcement learning problems, namely, searching in value function space and searching in policy space. Temporal difference methods and evolutionary algorithms are well-known examples of these approaches. Kaelbling, Littman and Moore recently provided an informative survey of temporal difference methods. This article focuses on the application of evolutionary algorithms to the reinforcement learning problem, emphasizing alternative policy representations, credit assignment methods, and problem-specific genetic operators. Strengths and weaknesses of the evolutionary approach to reinforcement learning are presented, along with a survey of representative applications

Autonomous mobility for an electronic wheelchair

Despite the rapid development of medical technologies the health sector does not yet offer any universal remedy for people suffering from permanent impairment of motor functions. Individuals depending on the range of disability require rehabilitation and help to perform the ALDs (activities of daily living). To aid people affected by the impairment and relieve from some duties the ones responsible for helping them the electronic wheelchair was developed. One of the functions of the electronic wheelchair is supposed to be autonomous navigation with speech recognition. The main objective of this project was to extend the existing electronic wheelchair solution with all necessary equipment and software necessary to make the autonomous navigation possible. As a result, a versatile system was created capable of mapping the working space and navigating in both known and unknown dynamic environments. The system allows dynamic obstacle detection and avoidance, basic recovery behaviors and accepts navigation goals provided by speech recognition.A pesar del rápido desarrollo de las tecnologías médicas el sector de la salud todavía no ofrece ningún remedio universal para las personas sufriendo de falta de control motor. Dependiente del rango de discapacidad las personas requieren rehabilitación y ayuda para realizar AC (actividades cotidianas). Para ayudar a las personas afectadas por discapacidad y relevar de algunos deberes la gente que los soporta se desarrolló la silla de ruedas electrónica. Una de las funciones de ya mencionada silla de ruedas debería ser la navegación autónoma con reconocimiento de voz. Entonces el objetivo principal de este proyecto fue extender la solución existente con todo el hardware y software necesarios para que la navegación autónoma sea posible. El proyecto resultado en creación de un sistema versátil capaz de mapear el espacio de trabajo y navegar en entornos también conocidos y desconocidos. El sistema permite detección y evitación dinámica de obstáculos, soporta comportamientos básicos de recuperación y acepta objetivos de navegación proporcionados por el software de reconocimiento de voz

New technique to measure the cavity defects of Fabry-Perot interferometers

(Abridged): We define and test a new technique to accurately measure the cavity defects of air-spaced FPIs, including distortions due to the spectral tuning process typical of astronomical observations. We further develop a correction technique to maintain the shape of the cavity as constant as possible during the spectral scan. These are necessary steps to optimize the spectral transmission profile of a two-dimensional spectrograph using one or more FPIs. We devise a generalization of the techniques developed for the so-called phase-shifting interferometry to the case of FPIs. The technique is applicable to any FPI that can be tuned via changing the cavity spacing ($z$-axis), and can be used for any etalon regardless of the coating' reflectivity. The major strength of our method is the ability to fully characterize the cavity during a spectral scan, allowing for the determination of scan-dependent modifications of the plates. As a test, we have applied this technique to three 50 mm diameter interferometers, with cavity gaps ranging between 600 micron and 3 mm, coated for use in the visible range. We obtain accurate and reliable measures of the cavity defects of air-spaced FPIs, and of their evolution during the entire spectral scan. Our main, and unexpected, result is that the relative tilt between the two FPI plates varies significantly during the spectral scan, and can dominate the cavity defects; in particular, we observe that the tilt component at the extremes of the scan is sensibly larger than at the center of the scan. Exploiting the capability of the electronic controllers to set the reference plane at any given spectral step, we develop a correction technique that allows the minimization of the tilt during a complete spectral scan. The correction remains highly stable over long periods, well beyond the typical duration of astronomical observations.Comment: 15 pages, 20+ figures, accepted for publication in A&A. Two additional movies are available in the online version of the pape

On thermal sensor calibration and software techniques for many-core thermal management

The high power density of a many-core processor results in increased temperature which negatively impacts system reliability and performance. Dynamic thermal management applies thermal-aware techniques at run time to avoid overheating using temperature information collected from on-chip thermal sensors. Temperature sensing and thermal control schemes are two critical technologies for successfully maintaining thermal safety. In this dissertation, on-line thermal sensor calibration schemes are developed to provide accurate temperature information. Software-based dynamic thermal management techniques are proposed using calibrated thermal sensors. Due to process variation and silicon aging, on-chip thermal sensors require periodic calibration before use in DTM. However, the calibration cost for thermal sensors can be prohibitively high as the number of on-chip sensors increases. Linear models which are suitable for on-line calculation are employed to estimate temperatures at multiple sensor locations using performance counters. The estimated temperature and the actual sensor thermal profile show a very high similarity with correlation coefficient ~0.9 for SPLASH2 and SPEC2000 benchmarks. A calibration approach is proposed to combine potentially inaccurate temperature values obtained from two sources: thermal sensor readings and temperature estimations. A data fusion strategy based on Bayesian inference, which combines information from these two sources, is demonstrated. The result shows the strategy can effectively recalibrate sensor readings in response to inaccuracies caused by process variation and environmental noise. The average absolute error of the corrected sensor temperature readings is A dynamic task allocation strategy is proposed to address localized overheating in many-core systems. Our approach employs reinforcement learning, a dynamic machine learning algorithm that performs task allocation based on current temperatures and a prediction regarding which assignment will minimize the peak temperature. Our results show that the proposed technique is fast (scheduling performed in \u3c1 \u3ems) and can efficiently reduce peak temperature by up to 8 degree C in a 49-core processor (6% on average) versus a leading competing task allocation approach for a series of SPLASH-2 benchmarks. Reinforcement learning has also been applied to 3D integrated circuits to allocate tasks with thermal awareness