Vision-Depth Landmarks and Inertial Fusion for Navigation in Degraded Visual Environments

This paper proposes a method for tight fusion of visual, depth and inertial data in order to extend robotic capabilities for navigation in GPS-denied, poorly illuminated, and texture-less environments. Visual and depth information are fused at the feature detection and descriptor extraction levels to augment one sensing modality with the other. These multimodal features are then further integrated with inertial sensor cues using an extended Kalman filter to estimate the robot pose, sensor bias terms, and landmark positions simultaneously as part of the filter state. As demonstrated through a set of hand-held and Micro Aerial Vehicle experiments, the proposed algorithm is shown to perform reliably in challenging visually-degraded environments using RGB-D information from a lightweight and low-cost sensor and data from an IMU.Comment: 11 pages, 6 figures, Published in International Symposium on Visual Computing (ISVC) 201

Marker based Thermal-Inertial Localization for Aerial Robots in Obscurant Filled Environments

For robotic inspection tasks in known environments fiducial markers provide a reliable and low-cost solution for robot localization. However, detection of such markers relies on the quality of RGB camera data, which degrades significantly in the presence of visual obscurants such as fog and smoke. The ability to navigate known environments in the presence of obscurants can be critical for inspection tasks especially, in the aftermath of a disaster. Addressing such a scenario, this work proposes a method for the design of fiducial markers to be used with thermal cameras for the pose estimation of aerial robots. Our low cost markers are designed to work in the long wave infrared spectrum, which is not affected by the presence of obscurants, and can be affixed to any object that has measurable temperature difference with respect to its surroundings. Furthermore, the estimated pose from the fiducial markers is fused with inertial measurements in an extended Kalman filter to remove high frequency noise and error present in the fiducial pose estimates. The proposed markers and the pose estimation method are experimentally evaluated in an obscurant filled environment using an aerial robot carrying a thermal camera.Comment: 10 pages, 5 figures, Published in International Symposium on Visual Computing 201

Sensor System for Rescue Robots

A majority of rescue worker fatalities are a result of on-scene responses. Existing technologies help assist the first responders in scenarios of no light, and there even exist robots that can navigate radioactive areas. However, none are able to be both quickly deployable and enter hard to reach or unsafe areas in an emergency event such as an earthquake or storm that damages a structure. In this project we created a sensor platform system to augment existing robotic solutions so that rescue workers can search for people in danger while avoiding preventable injury or death and saving time and resources. Our results showed that we were able to map out a 2D map of the room with updates for robot motion on a display while also showing a live thermal image in front of the system. The system is also capable of taking a digital picture from a triggering event and then displaying it on the computer screen. We discovered that data transfer plays a huge role in making different programs like Arduino and Processing interact with each other. Consequently, this needs to be accounted for when improving our project. In particular our project is wired right now but should deliver data wirelessly to be of any practical use. Furthermore, we dipped our feet into SLAM technologies and if our project were to become autonomous, more research into the algorithms would make this autonomy feasible

A Survey of research in Deep Learning for Robotics for Undergraduate research interns

Over the last several years, use cases for robotics based solutions have diversified from factory floors to domestic applications. In parallel, Deep Learning approaches are replacing traditional techniques in Computer Vision, Natural Language Processing, Speech processing, etc. and are delivering robust results. Our goal is to survey a number of research internship projects in the broad area of 'Deep Learning as applied to Robotics' and present a concise view for the benefit of aspiring student interns. In this paper, we survey the research work done by Robotic Institute Summer Scholars (RISS), CMU. We particularly focus on papers that use deep learning to solve core robotic problems and also robotic solutions. We trust this would be useful particularly for internship aspirants for the Robotics Institute, CMUComment: This document is a draft version at this stage and the final version will be created soo

Search and Rescue under the Forest Canopy using Multiple UAVs

We present a multi-robot system for GPS-denied search and rescue under the forest canopy. Forests are particularly challenging environments for collaborative exploration and mapping, in large part due to the existence of severe perceptual aliasing which hinders reliable loop closure detection for mutual localization and map fusion. Our proposed system features unmanned aerial vehicles (UAVs) that perform onboard sensing, estimation, and planning. When communication is available, each UAV transmits compressed tree-based submaps to a central ground station for collaborative simultaneous localization and mapping (CSLAM). To overcome high measurement noise and perceptual aliasing, we use the local configuration of a group of trees as a distinctive feature for robust loop closure detection. Furthermore, we propose a novel procedure based on cycle consistent multiway matching to recover from incorrect pairwise data associations. The returned global data association is guaranteed to be cycle consistent, and is shown to improve both precision and recall compared to the input pairwise associations. The proposed multi-UAV system is validated both in simulation and during real-world collaborative exploration missions at NASA Langley Research Center.Comment: IJRR revisio

From Monocular SLAM to Autonomous Drone Exploration

Micro aerial vehicles (MAVs) are strongly limited in their payload and power capacity. In order to implement autonomous navigation, algorithms are therefore desirable that use sensory equipment that is as small, low-weight, and low-power consuming as possible. In this paper, we propose a method for autonomous MAV navigation and exploration using a low-cost consumer-grade quadrocopter equipped with a monocular camera. Our vision-based navigation system builds on LSD-SLAM which estimates the MAV trajectory and a semi-dense reconstruction of the environment in real-time. Since LSD-SLAM only determines depth at high gradient pixels, texture-less areas are not directly observed so that previous exploration methods that assume dense map information cannot directly be applied. We propose an obstacle mapping and exploration approach that takes the properties of our semi-dense monocular SLAM system into account. In experiments, we demonstrate our vision-based autonomous navigation and exploration system with a Parrot Bebop MAV

Submap Matching for Stereo-Vision Based Indoor/Outdoor SLAM

Autonomous robots operating in semi- or unstructured environments, e.g. during search and rescue missions, require methods for online on-board creation of maps to support path planning and obstacle avoidance. Perception based on stereo cameras is well suited for mixed indoor/outdoor environments. The creation of full 3D maps in GPS-denied areas however is still a challenging task for current robot systems, in particular due to depth errors resulting from stereo reconstruction. State-of-the-art 6D SLAM approaches employ graph-based optimization on the relative transformations between keyframes or local submaps. To achieve loop closures, correct data association is crucial, in particular for sensor input received at different points in time. In order to approach this challenge, we propose a novel method for submap matching. It is based on robust keypoints, which we derive from local obstacle classification. By describing geometrical 3D features, we achieve invariance to changing viewpoints and varying light conditions. We performed experiments in indoor, outdoor and mixed environments. In all three scenarios we achieved a final 3D position error of less than 0.23% of the full trajectory. In addition, we compared our approach with a 3D RBPF SLAM from previous work, achieving an improvement of at least 27% in mean 2D localization accuracy in different scenarios

A stacked LSTM based approach for reducing semantic pose estimation error

© 1963-2012 IEEE. Achieving high estimation accuracy is significant for semantic simultaneous localization and mapping (SLAM) tasks. Yet, the estimation process is vulnerable to several sources of error, including limitations of the instruments used to perceive the environment, shortcomings of the employed algorithm, environmental conditions, or other unpredictable noise. In this article, a novel stacked long short-term memory (LSTM)-based error reduction approach is developed to enhance the accuracy of semantic SLAM in presence of such error sources. Training and testing data sets were constructed through simulated and real-time experiments. The effectiveness of the proposed approach was demonstrated by its ability to capture and reduce semantic SLAM estimation errors in training and testing data sets. Quantitative performance measurement was carried out using the absolute trajectory error (ATE) metric. The proposed approach was compared with vanilla and bidirectional LSTM networks, shallow and deep neural networks, and support vector machines. The proposed approach outperforms all other structures and was able to significantly improve the accuracy of semantic SLAM. To further verify the applicability of the proposed approach, it was tested on real-time sequences from the TUM RGB-D data set, where it was able to improve the estimated trajectories

Active SLAM: A Review On Last Decade

This article presents a comprehensive review of the Active Simultaneous Localization and Mapping (A-SLAM) research conducted over the past decade. It explores the formulation, applications, and methodologies employed in A-SLAM, particularly in trajectory generation and control-action selection, drawing on concepts from Information Theory (IT) and the Theory of Optimal Experimental Design (TOED). This review includes both qualitative and quantitative analyses of various approaches, deployment scenarios, configurations, path-planning methods, and utility functions within A-SLAM research. Furthermore, this article introduces a novel analysis of Active Collaborative SLAM (AC-SLAM), focusing on collaborative aspects within SLAM systems. It includes a thorough examination of collaborative parameters and approaches, supported by both qualitative and statistical assessments. This study also identifies limitations in the existing literature and suggests potential avenues for future research. This survey serves as a valuable resource for researchers seeking insights into A-SLAM methods and techniques, offering a current overview of A-SLAM formulation.Comment: 34 pages, 8 figures, 6 table