Physical Layer Impairments Aware Dynamic Lightpath Provisioning In Mixed Line Rate Wdm Networks

Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2014Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2014Bu tez çalışmasında, fiziksel katman bozukluklarını dikkate alarak, çoklu veri iletişim hızlı ağlarda dinamik olarak gelen bağlantı istekleri için ısıkyolu kurma problemi ele alınmıştır. Problemde verilenler; dinamik olarak gelen farklı kapasitelerde bağlantı istekleri, fiziksel topoloji, fiziksel hatların taşıyabildiği dalgaboyu miktarı, ağın anlık durumu ve fiziksel katman bozukluklarını dikkate alırken kullanılacak olan parametrelerdir. Problemde istenilen ise; gelen bağlantı isteklerinin mümkün olduğu kadar fazlasını kurabilmek maksadı ile uygun yol ve dalgaboyunun bulunmasıdır. Bunu gerçekleştirirken, hem kurulacak olan ışıkyolunun sinyal kalitesinin kabul edilebilir bit hata oranını karşılaması, hem de sistemde daha önceden kurulmuş olan ışıkyollarının sinyal kalitesinin kabul edilebilir sınırların altına inmesini engellemek gerekmektedir. Bu tez çalışmasında, kurulabilen ışıkyolu miktarını artırmak maksadı ile ışıkyolunun sisteme giriş gücü de ayrıca ele alınmıştır.In this thesis, we studied the impairment-aware lightpath provisioning problem for dynamic connection requests in MLR networks. Given, a dynamic connection request with a given rate, physical topology, number of wavelengths carried by each fiber, current network state, and PLI parameters, our aim is to determine the route and wavelength over which the lightpath should be set up, in order to be able to maximize the number of established connections while satisfying the given bit-error rate (BER) for the incoming connection, and to avoid disrupting the existing lightpaths. We also evaluate the launch power of the lightpath to maximize the established connections.DoktoraPh

Software Defined Applications in Cellular and Optical Networks

Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Comment: Ph.D. Dissertation, Electrical Engineering Department, Arizona State University, Tempe, AZ, US

Survivability aspects of future optical backbone networks

In huidige glasvezelnetwerken kan een enkele vezel een gigantische hoeveelheid data dragen, ruwweg het equivalent van 25 miljoen gelijktijdige telefoongesprekken. Hierdoor zullen netwerkstoringen, zoals breuken van een glasvezelkabel, de communicatie van een groot aantal eindgebruikers verstoren. Netwerkoperatoren kiezen er dan ook voor om hun netwerk zo te bouwen dat zulke grote storingen automatisch opgevangen worden. Dit proefschrift spitst zich toe op twee aspecten rond de overleefbaarheid in toekomstige optische netwerken. De eerste doelstelling die beoogd wordt is het tot stand brengen vanrobuuste dataverbindingen over meerdere netwerken. Door voldoende betrouwbare verbindingen tot stand te brengen over een infrastructuur die niet door een enkele entiteit wordt beheerd kan men bv. weredwijd Internettelevisie van hoge kwaliteit aanbieden. De bestudeerde oplossing heeft niet enkel tot doel om deze zeer betrouwbare verbinding te berekenen, maar ook om dit te bewerkstelligen met een minimum aan gebruikte netwerkcapaciteit. De tweede doelstelling was om een antwoord te formuleren om de vraag hoe het toepassen van optische schakelsystemen gebaseerd op herconfigureerbare optische multiplexers een impact heeft op de overleefbaarheid van een optisch netwerk. Bij lagere volumes hebben optisch geschakelde netwerken weinig voordeel van dergelijke gesofistikeerde methoden. Elektronisch geschakelde netwerken vertonen geen afhankelijkheid van het datavolume en hebben altijd baat bij optimalisatie

SDN-based traffic engineering in data centers, Interconnects, and Carrier Networks

Server virtualization and cloud computing have escalated the bandwidth and performance demands on the DCN (data center network). The main challenges in DCN are maximizing network utilization and ensuring fault tolerance to address multiple node-and-link failures. A multitenant and highly dynamic virtualized environment consists of a large number of endstations, leading to a very large number of flows that challenge the scalability of a solution to network throughput maximization. The challenges are scalability, in terms of address learning, forwarding decision convergence, and forwarding state size, as well as flexibility for offloading with VM migration. Geographically distributed data centers are inter-connected through service providers’ carrier network. Service providers offer wide-area network (WAN) connection such as private lines and MPLS circuits between edges of data centers. DC sides of network operators try to maximize the utilization of such defined overlay WAN connection i.e. data center interconnection (DCI), which applies to edges of DC networks. Service provider sides of network operators try to optimize the core of carrier network. Along with the increasing adoption of ROADM, OTN, and packet switching technologies, traditional two-layer IP/MPLS-over-WDM network has evolved into three-layer IP/MPLS-over-OTN-over-DWDM network and once defined overlay topology is now transitioning to dynamic topologies based on on-demand traffic demands. Network operations are thus divided into three physical sub-networks: DCN, overlay DCI, and multi-layer carrier network. Server virtualization, cloud computing and evolving multilayer carrier network challenge traffic engineering to maximize utilization on all physical subnetworks. The emerging software-defined networking (SDN) architecture moves path computation towards a centralized controller, which has global visibility. Carriers indicate a strong preference for SDN to be interoperable between multiple vendors in heterogeneous transport networks. SDN is a natural way to create a unified control plane across multiple administrative divisions. This thesis contributes SDN-based traffic engineering techniques for maximizing network utilization of DCN, DCI, and carrier network. The first part of the thesis focuses on DCN traffic engineering. Traditional forwarding mechanisms using a single path are not able to take advantages of available multiple physical paths. The state-of-the-art MPTCP (Multipath Transmission Control Protocol) solution uses multiple randomly selected paths, but cannot give total aggregated capacity. Moreover, it works as a TCP process, and so does not support other protocols like UDP. To address these issues, this thesis presents a solution using adaptive multipath routing in a Layer-2 network with static (capacity and latency) metrics, which adapts link and path failures. This solution provides innetwork aggregated path capacity to individual flows, as well as scalability and multitenancy, by separating end-station services from the provider’s network. The results demonstrate an improvement of 14% in the worst bisection bandwidth utilization, compared to the MPTCP with 5 sub-flows. The second part of the thesis focuses on DCI traffic engineering. The existing approaches to reservation services provide limited reservation capabilities, e.g. limited connections over links returned by the traceroute over traditional IP-based networks. Moreover, most existing approaches do not address fault tolerance in the event of node or link failures. To address these issues, this thesis presents ECMP-like multipath routing algorithm and forwarding assignment scheme that increase reservation acceptance rate compared to state-of-art reservation frameworks in the WAN-links between data centers, and such reservations can be configured with a limited number of static forwarding rules on switches. Our prototype provides the RESTful web service interface for link-fail event management and re-routes paths for all the affected reservations. In the final part of the thesis, we focused on multi-layer carrier network traffic engineering. New dynamic traffic trends in upper layers (e.g. IP routing) require dynamic configuration of the optical transport to re-direct the traffic, and this in turn requires an integration of multiple administrative control layers. When multiple bandwidth path requests come from different nodes in different layers, a distributed sequential computation cannot optimize the entire network. Most prior research has focused on the two-layer problem, and recent three-layer research studies are limited to the capacity dimensioning problem. In this thesis, we present an optimization model with MILP formulation for dynamic traffic in a three-layer network, especially taking into account the unique technological constraints of the distinct OTN layer. Our experimental results show how unit cost values of different layers affect network cost and parameters in the presence of multiple sets of traffic loads. We also demonstrate the effectiveness of our proposed heuristic approach

Planification et dimensionnement des réseaux optiques de longues distances

Le projet de recherche porte sur l'étude des problèmes de conception et de planification d'un réseau optique de longue distance, aussi appelé réseau de coeur (OWAN-Optical Wide Area Network en anglais). Il s'agit d'un réseau qui transporte des flots agrégés en mode commutation de circuits. Un réseau OWAN relie différents sites à l'aide de fibres optiques connectées par des commutateurs/routeurs optiques et/ou électriques. Un réseau OWAN est maillé à l'échelle d'un pays ou d’un continent et permet le transit des données à très haut débit. Dans une première partie du projet de thèse, nous nous intéressons au problème de conception de réseaux optiques agiles. Le problème d'agilité est motivé par la croissance de la demande en bande passante et par la nature dynamique du trafic. Les équipements déployés par les opérateurs de réseaux doivent disposer d'outils de configuration plus performants et plus flexibles pour gérer au mieux la complexité des connexions entre les clients et tenir compte de la nature évolutive du trafic. Souvent, le problème de conception d'un réseau consiste à prévoir la bande passante nécessaire pour écouler un trafic donné. Ici, nous cherchons en plus à choisir la meilleure configuration nodale ayant un niveau d'agilité capable de garantir une affectation optimale des ressources du réseau. Nous étudierons également deux autres types de problèmes auxquels un opérateur de réseau est confronté. Le premier problème est l'affectation de ressources du réseau. Une fois que l'architecture du réseau en termes d'équipements est choisie, la question qui reste est de savoir : comment dimensionner et optimiser cette architecture pour qu'elle rencontre le meilleur niveau possible d'agilité pour satisfaire toute la demande. La définition de la topologie de routage est un problème d'optimisation complexe. Elle consiste à définir un ensemble de chemins optiques logiques, choisir les routes physiques suivies par ces derniers, ainsi que les longueurs d'onde qu'ils utilisent, de manière à optimiser la qualité de la solution obtenue par rapport à un ensemble de métriques pour mesurer la performance du réseau. De plus, nous devons définir la meilleure stratégie de dimensionnement du réseau de façon à ce qu'elle soit adaptée à la nature dynamique du trafic. Le second problème est celui d'optimiser les coûts d'investissement en capital(CAPEX) et d'opération (OPEX) de l'architecture de transport proposée. Dans le cas du type d'architecture de dimensionnement considérée dans cette thèse, le CAPEX inclut les coûts de routage, d'installation et de mise en service de tous les équipements de type réseau installés aux extrémités des connexions et dans les noeuds intermédiaires. Les coûts d'opération OPEX correspondent à tous les frais liés à l'exploitation du réseau de transport. Étant donné la nature symétrique et le nombre exponentiel de variables dans la plupart des formulations mathématiques développées pour ces types de problèmes, nous avons particulièrement exploré des approches de résolution de type génération de colonnes et algorithme glouton qui s'adaptent bien à la résolution des grands problèmes d'optimisation. Une étude comparative de plusieurs stratégies d'allocation de ressources et d'algorithmes de résolution, sur différents jeux de données et de réseaux de transport de type OWAN démontre que le meilleur coût réseau est obtenu dans deux cas : une stratégie de dimensionnement anticipative combinée avec une méthode de résolution de type génération de colonnes dans les cas où nous autorisons/interdisons le dérangement des connexions déjà établies. Aussi, une bonne répartition de l'utilisation des ressources du réseau est observée avec les scénarios utilisant une stratégie de dimensionnement myope combinée à une approche d'allocation de ressources avec une résolution utilisant les techniques de génération de colonnes. Les résultats obtenus à l'issue de ces travaux ont également démontré que des gains considérables sont possibles pour les coûts d'investissement en capital et d'opération. En effet, une répartition intelligente et hétérogène de ressources d’un réseau sur l'ensemble des noeuds permet de réaliser une réduction substantielle des coûts du réseau par rapport à une solution d'allocation de ressources classique qui adopte une architecture homogène utilisant la même configuration nodale dans tous les noeuds. En effet, nous avons démontré qu'il est possible de réduire le nombre de commutateurs photoniques tout en satisfaisant la demande de trafic et en gardant le coût global d'allocation de ressources de réseau inchangé par rapport à l'architecture classique. Cela implique une réduction substantielle des coûts CAPEX et OPEX. Dans nos expériences de calcul, les résultats démontrent que la réduction de coûts peut atteindre jusqu'à 65% dans certaines jeux de données et de réseau.The research project focuses on the design and planning problems of long distance optical networks also called OWANs (Optical Wide Area Networks) or "backbone". These are networks that carry aggregate flows in circuit switching mode. OWAN networks connect sites with optical fibers, cross-connected by optical and/or electric switches/routers. OWAN networks are meshed throughout a country or continent and allow the transit of data at very high speed. In the first part of the thesis, we are interested in the design problem of agile optical networks. The problem of agility is motivated by the growing of bandwidth demand and by the dynamic pattern of client traffic. Equipment deployed by network operators must allow greater reconfigurability and scalability to manage the complexity of connections among clients and deal with a dynamic traffic pattern. Often, the problem of network design is to provide the required bandwidth to grant a given traffic pattern. Here, we seek to choose the best nodal configuration with the agility level that can guarantee the optimal network resource provisioning. We will also study two other types of problems that can face a network operator. The first problem is the network resource provisioning. Once the network architecture design is chosen, the remaining question is : How to resize and optimize the architecture to meet the agility level required to grant any demand. The definition of the network provisioning scheme is a complex optimization problem. It consists of defining a set of optical paths, choosing the routes followed by them, and their assigned wavelengths, so as to optimize the solution quality with respect to some network metrics. Moreover, we need to define the best design strategy adapted to the dynamic traffic pattern. The second problem is to optimize the capital investment cost (CAPEX) and the operational expenses (OPEX) of the selected optical transport architecture. In the case of the design architecture considered in this thesis, the CAPEX includes the routing cost, the installation cost and the commissioning service cost for all required network equipment in end connections and intermediate nodes. OPEX correspond to expenses related to the operation of the transport network. Given the symmetrical nature and the exponential number of variables in most mathematical formulations developed for these types of problems, we particularly explored solving approaches based on a column generation algorithm and greedy heuristics which adapt well to these types of modeling and large scale mathematical models. A comparative study of several provisioning strategies and solution algorithms on different traffic and OWAN network instances show that the minimum network cost is obtained in two cases : An anticipative dimensioning strategy combined with a column generation solution combined with a rounding off heuristic in the context of no disturbance or possible disturbance of previously granted connections. Also, a good repartition of used network resources (MSPPs, PXC and wavelengths) is observed with the scenarios using a myopic strategy and a column generation solution approach. The results obtained from this thesis also show that a considerable saving in CAPEX and OPEX costs are possible in the case of an intelligent allocation and heteregenous distribution of network resources through network nodes compared with the classical architecture that adopts a uniform architecture using the same configuration in all nodes. Indeed, we demonstrated that it is possible to reduce the number of PXCs (Photonic Switches) while satisfying the traffic matrix and keeping the overall cost of provisioning network unchanged compared to what is happening in a classic architecture. This implies a substantial reduction in network CAPEX and OPEX costs. In our experiments with various network and traffic instances, we show that a careful dimensioning and location of the nodal equipment can save up to 65% of network expenses

Lightpath-Level Protection versus Connection-Level Protection for Carrier-Grade Ethernet in a Mixed-Line-Rate Telecom Network

Abstract: Ethernet is a success story in Local Area Networks (LAN). Efforts for extending its boundaries beyond LAN to the carriers ’ backbone networks are in progress. We study the problem of designing reliable and cost-efficient high-rate (100 Gbit/s) carrier-grade Ethernet in a multi-line-rate telecom network under signal transmission-range constraints. Reliability is achieved using shared-path protection at two levels: (1) Protection-at-Connection (PAC) level, or (2) Protection-at-Lightpath (PAL) level. We study the two cases for their impact on network cost and other performance parameters. We construct a graph, called Mixed Topology (MT), using which it is possible to: (1) identify traffic grooming possibilities, (2) select a path which requires the minimum amount of 3R regeneration, and (3) effectively choose the data rate of a lightpath to be established. Our algorithms, tested on the 17-node German network, lead to the following findings: (1) for both PAL and PAC, our MTbased algorithm resulted in lower network cost and higher lightpath utilization compared with other schemes; and (2) in general, PAL incurs slightly higher cost than PAC

Enabling Technology in Optical Fiber Communications: From Device, System to Networking

This book explores the enabling technology in optical fiber communications. It focuses on the state-of-the-art advances from fundamental theories, devices, and subsystems to networking applications as well as future perspectives of optical fiber communications. The topics cover include integrated photonics, fiber optics, fiber and free-space optical communications, and optical networking

Telecommunications Networks

This book guides readers through the basics of rapidly emerging networks to more advanced concepts and future expectations of Telecommunications Networks. It identifies and examines the most pressing research issues in Telecommunications and it contains chapters written by leading researchers, academics and industry professionals. Telecommunications Networks - Current Status and Future Trends covers surveys of recent publications that investigate key areas of interest such as: IMS, eTOM, 3G/4G, optimization problems, modeling, simulation, quality of service, etc. This book, that is suitable for both PhD and master students, is organized into six sections: New Generation Networks, Quality of Services, Sensor Networks, Telecommunications, Traffic Engineering and Routing

Efficient Passive Clustering and Gateways selection MANETs

Passive clustering does not employ control packets to collect topological information in ad hoc networks. In our proposal, we avoid making frequent changes in cluster architecture due to repeated election and re-election of cluster heads and gateways. Our primary objective has been to make Passive Clustering more practical by employing optimal number of gateways and reduce the number of rebroadcast packets