400 research outputs found
Dynamic Gaits and Control in Flexible Body Quadruped Robot
Legged robots are highly attractive for
military purposes such as carrying heavy loads on uneven
terrain for long durations because of the higher mobility
they give on rough terrain compared to wheeled
vehicles/robots. Existing state-of-the-art quadruped robots
developed by Boston Dynamics such as LittleDog and
BigDog do not have flexible bodies. It can be easily seen that
the agility of quadruped animals such as dogs, cats, and deer
etc. depend to a large extent on their ability to flex their
bodies. However, simulation study on step climbing in 3D
terrain quadruped robot locomotion with flexible body has
not been reported in literature. This paper aims to study the
effect of body flexibility on stability and energy efficiency in
walking mode, trot mode and running (bounding) mode on
step climbing
Kinematic primitives for walking and trotting gaits of a quadruped robot with compliant legs
In this work we research the role of body dynamics in the complexity of kinematic patterns in a quadruped robot with compliant legs. Two gait patterns, lateral sequence walk and trot, along with leg length control patterns of different complexity were implemented in a modular, feed-forward locomotion controller. The controller was tested on a small, quadruped robot with compliant, segmented leg design, and led to self-stable and self-stabilizing robot locomotion. In-air stepping and on-ground locomotion leg kinematics were recorded, and the number and shapes of motion primitives accounting for 95% of the variance of kinematic leg data were extracted. This revealed that kinematic patterns resulting from feed-forward control had a lower complexity (in-air stepping, 2 to 3 primitives) than kinematic patterns from on-ground locomotion (4 primitives), although both experiments applied identical motor patterns. The complexity of on-ground kinematic patterns had increased, through ground contact and mechanical entrainment. The complexity of observed kinematic on-ground data matches those reported from level-ground locomotion data of legged animals. Results indicate that a very low complexity of modular, rhythmic, feed-forward motor control is sufficient for level-ground locomotion in combination with passive compliant legged hardware
Thrust control, stabilization and energetics of a quadruped running robot
In order to achieve powered autonomous running robots it is essential to develop efficient actuator systems, especially for generating the radial thrust in the legs. In addition, the control of the radial thrust of the legs can be a simple, effective method for stabilizing the body pitch in a running gait. This paper presents the mechanical systems, models and control strategies employed to generate and control leg thrust in the KOLT quadruped running robot. An analytical model of the electro-pneumatic leg thrusting system is presented and analyzed to evaluate its performance and to facilitate the design of control strategies. Several experiments have been conducted to estimate the energy losses and determine their origins as well as to compute the energetic efficiency of the actuation system. Two thrust control methods are also proposed and tested experimentally. The closed loop method regulates thrust through the control of the hip liftoff speed, a conceptually simple control strategy that stabilizes the body pitch in pronk and trot gaits without the need for central feedback, even on irregular terrain. The open-loop control method regulates the energy added in each hop based on the model of the actuator system. The efficacy of these models and techniques is tested in several planar trot and pronk experiments, and the results are analyzed focusing on the body stabilization, the power consumption and the energetic efficiency. © SAGE Publications 2008 Los Angeles
Online Optimization-based Gait Adaptation of Quadruped Robot Locomotion
Quadruped robots demonstrated extensive capabilities of traversing complex and unstructured
environments. Optimization-based techniques gave a relevant impulse to the research on legged
locomotion. Indeed, by designing the cost function and the constraints, we can guarantee the
feasibility of a motion and impose high-level locomotion tasks, e.g., tracking of a reference
velocity. This allows one to have a generic planning approach without the need to tailor a
specific motion for each terrain, as in the heuristic case. In this context, Model Predictive
Control (MPC) can compensate for model inaccuracies and external disturbances, thanks to
the high-frequency replanning.
The main objective of this dissertation is to develop a Nonlinear MPC (NMPC)-based
locomotion framework for quadruped robots. The aim is to obtain an algorithm which can
be extended to different robots and gaits; in addition, I sought to remove some assumptions
generally done in the literature, e.g., heuristic reference generator and user-defined gait
sequence.
The starting point of my work is the definition of the Optimal Control Problem to generate
feasible trajectories for the Center of Mass. It is descriptive enough to capture the linear and
angular dynamics of the robot as a whole. A simplified model (Single Rigid Body Dynamics
model) is used for the system dynamics, while a novel cost term maximizes leg mobility
to improve robustness in the presence of nonflat terrain. In addition, to test the approach
on the real robot, I dedicated particular effort to implementing both a heuristic reference
generator and an interface for the controller, and integrating them into the controller framework
developed previously by other team members.
As a second contribution of my work, I extended the locomotion framework to deal with a
trot gait. In particular, I generalized the reference generator to be based on optimization.
Exploiting the Linear Inverted Pendulum model, this new module can deal with the underactuation of the trot when only two legs are in contact with the ground, endowing the NMPC
with physically informed reference trajectories to be tracked. In addition, the reference velocities are used to correct the heuristic footholds, obtaining contact locations coherent with
the motion of the base, even though they are not directly optimized.
The model used by the NMPC receives as input the gait sequence, thus with the last part
of my work I developed an online multi-contact planner and integrated it into the MPC
framework. Using a machine learning approach, the planner computes the best feasible option,
even in complex environments, in a few milliseconds, by ranking online a set of discrete options
for footholds, i.e., which leg to move and where to step. To train the network, I designed
a novel function, evaluated offline, which considers the value of the cost of the NMPC and
robustness/stability metrics for each option.
These methods have been validated with simulations and experiments over the three years. I
tested the NMPC on the Hydraulically actuated Quadruped robot (HyQ) of the IIT’s Dynamic
Legged Systems lab, performing omni-directional motions on flat terrain and stepping on
a pallet (both static and relocated during the motion) with a crawl gait. The trajectory
replanning is performed at high-frequency, and visual information of the terrain is included to
traverse uneven terrain. A Unitree Aliengo quadruped robot is used to execute experiments
with the trot gait. The optimization-based reference generator allows the robot to reach a
fixed goal and recover from external pushes without modifying the structure of the NMPC.
Finally, simulations with the Solo robot are performed to validate the neural network-based
contact planning. The robot successfully traverses complex scenarios, e.g., stepping stones,
with both walk and trot gaits, choosing the footholds online.
The achieved results improved the robustness and the performance of the quadruped locomotion.
High-frequency replanning, dealing with a fixed goal, recovering after a push, and the automatic
selection of footholds could help the robots to accomplish important tasks for the humans,
for example, providing support in a disaster response scenario or inspecting an unknown
environment.
In the future, the contact planning will be transferred to the real hardware. Possible developments foresee the optimization of the gait timings, i.e., stance and swing duration, and a
framework which allows the automatic transition between gaits
Optimal Control for Quadruped Locomotion using LTV MPC
This paper presents a state-of-the-art optimal controller for quadruped
locomotion. The robot dynamics is represented using a single rigid body (SRB)
model. A linear time-varying model predictive controller (LTV MPC) is proposed
by using linearization schemes. Simulation results show that the LTV MPC can
execute various gaits, such as trot and crawl, and is capable of tracking
desired reference trajectories even under unknown external disturbances. The
LTV MPC is implemented as a quadratic program using qpOASES through the CasADi
interface at 50 Hz. The proposed MPC can reach up to 1 m/s top speed with an
acceleration of 0.5 m/s2 executing a trot gait. The implementation is available
at https:// github.com/AndrewZheng-1011/Quad_ConvexMP
- …