580 research outputs found
Recommended from our members
Optically transparent UWB antenna for wireless application & energy harvesting
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Transparent UWB antennas have been the focus of this PhD research. The use of transparent UWB antennas for stealth and energy harvesting has been the underlying applications that have given impetus to this research. Such transparent antennas being
built on materials that are discreet, flexible, conformal, conductive and having the ability to provide good antenna performance on glass to serve as the ‘last mile’ link in subsequent generation communications after 4G have been the basis for this contention. UWB in this regard is able to provide the transmission and reception of high data rates and fast video transmission that is an elementary demand of even a 4G wireless communications system. The integration of UWB antennas with photovoltaic to provide integral energy harvesting solutions that will further enhance the value of the UWB system in terms of cost effectiveness and performance are thus the basis of this work. This work hence starts with the study of a transparent conductive oxide polymer, AgHT and its properties, and culminates in the development of a transparent UWB antenna, which can be integrated with photovoltaic for window glass applications on homes and buildings. Other applications such transparent antennas can find use for like
on-body wireless communications in healthcare monitoring was also analysed and
presented. The radar absorbing material (RAM) property of the AgHT was investigated
and highlighted using CST simulation software, as no measurement facilities were
available. The transparent UWB antenna in lieu of the inherent absorbent property of
the AgHT material is thus able to exhibit stealth characteristics, a feature that would be much desired in military communications. Introduction of a novel method of connecting the co-axial connector to the feed of the antenna to improve gain and efficiency of transparent polymer based antennas and the development of a UWB antenna that maintains its Omni-directional characteristic instead of becoming directional on an amorphous silicon solar cell are presented as some of the contributions for this research work. Some preliminary analysis on the impact of glass on UWB antennas for video transmission and how to improve transmission is presented. The ability of the conductive part of the antenna radiator to be used as a RF and microwave harvester and how it can further add value to a transparent UWB antenna is presented by way of experimental data. Finally yet importantly, this thesis presents some insight into how transparent
antennas may be used in Green Technology Buildings to provide an integrated solution
for both wireless communications and energy harvesting as part of the future work.
Improvement to the aesthetics of the external appearance of residential buildings
through the integration of transparent satellite dish onto solar panels on rooftops is also discussed and illustrated as part of this future work
IRS-aided UAV for Future Wireless Communications: A Survey and Research Opportunities
Both unmanned aerial vehicles (UAVs) and intelligent reflecting surfaces
(IRS) are gaining traction as transformative technologies for upcoming wireless
networks. The IRS-aided UAV communication, which introduces IRSs into UAV
communications, has emerged in an effort to improve the system performance
while also overcoming UAV communication constraints and issues. The purpose of
this paper is to provide a comprehensive overview of IRSassisted UAV
communications. First, we provide five examples of how IRSs and UAVs can be
combined to achieve unrivaled potential in difficult situations. The
technological features of the most recent relevant researches on IRS-aided UAV
communications from the perspective of the main performance criteria, i.e.,
energy efficiency, security, spectral efficiency, etc. Additionally, previous
research studies on technology adoption as machine learning algorithms. Lastly,
some promising research directions and open challenges for IRS-aided UAV
communication are presented
1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface
A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance
Beam scanning by liquid-crystal biasing in a modified SIW structure
A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium
Antennas and Propagation Aspects for Emerging Wireless Communication Technologies
The increasing demand for high data rate applications and the delivery of zero-latency multimedia content drives technological evolutions towards the design and implementation of next-generation broadband wireless networks. In this context, various novel technologies have been introduced, such as millimeter wave (mmWave) transmission, massive multiple input multiple output (MIMO) systems, and non-orthogonal multiple access (NOMA) schemes in order to support the vision of fifth generation (5G) wireless cellular networks. The introduction of these technologies, however, is inextricably connected with a holistic redesign of the current transceiver structures, as well as the network architecture reconfiguration. To this end, ultra-dense network deployment along with distributed massive MIMO technologies and intermediate relay nodes have been proposed, among others, in order to ensure an improved quality of services to all mobile users. In the same framework, the design and evaluation of novel antenna configurations able to support wideband applications is of utmost importance for 5G context support. Furthermore, in order to design reliable 5G systems, the channel characterization in these frequencies and in the complex propagation environments cannot be ignored because it plays a significant role. In this Special Issue, fourteen papers are published, covering various aspects of novel antenna designs for broadband applications, propagation models at mmWave bands, the deployment of NOMA techniques, radio network planning for 5G networks, and multi-beam antenna technologies for 5G wireless communications
Antenas 3D para utilização em transmissão de energia sem fios
Mestrado em Engenharia Eletrónica e TelecomunicaçõesThe 3D printing has seen a very strong growth in the last five years, especially since began to appear solutions of this kind of technology at much lower prices and for common user. The design of freedom associated with the three-dimensional structures can create complex geometries that produce very specific characteristics of radiation for very demanding applications. Today, it is possible to do this without big budgets. In this dissertation the lens based solution is explored through 3D printing technology. Three antennas are presented, one microstrip coupled antenna without lens, the second with an extended hemispherical lens and the third with a spherical lens. The purpose of these antennas is to provide or capture power for passive sensor networks in space. These antennas operate in the K band, more specifically at 20 GHz. In these frequencies, the lenses become acceptable in size for many applications. With this dissertation it was concluded that the use of printed lenses in 3D printers is an interesting solution to increase the gain and to focus the electromagnetic field of an antenna. These characteristics allow to create small and compact antennas with a high gain that can perform a similar performance to others with higher cost and dimensions, such as reflectors, arrays, or horn antennas.A impressão em 3D tem assistido a um crescimento bastante acentuado nos últimos cinco anos, especialmente desde que começaram a aparecer soluções deste tipo de tecnologia a preços muito mais baixos e para o utilizador comum. A liberdade de desenho associada `as estruturas tridimensionais permite criar geometrias complexas que produzem características de radiação muito específicas para aplicações bastante exigentes. E, hoje em dia ´e possível fazer isto sem precisar de grandes orçamentos. Nesta dissertação ´e explorada a solução baseada em lentes, através da tecnologia de impressão 3D. São apresentadas três antenas, uma antena microstrip alimentada por acoplamento sem lente, a segunda com uma lente semiesférica estendida e a terceira com uma lente esférica. O objetivo destas antenas ´e fornecer ou captar potência para redes de sensores passivos no espaço. As antenas apresentadas funcionam na banda K, mais concretamente a 20 GHz. A estas frequências as lentes tornam-se aceitáveis em tamanho para muitas aplicações. Com esta dissertação concluiu-se que a utilização de lentes impressas em impressoras 3D ´e uma solução interessante para aumentar o ganho e focar o campo eletromagnético de uma antena. Estas características permitem criar antenas pequenas e compactas com um ganho elevado e que conseguem ter uma performance semelhante a outras de maior custo e dimensões, como por exemplo, as parabólicas, agregados, ou cornetas
Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit
and receive on the same frequency band, which challenges the traditional
assumption in wireless network design. The full-duplex capability enhances
spectral efficiency and decreases latency, which are two key drivers pushing
the performance expectations of next-generation mobile networks. In less than
ten years, in-band FD has advanced from being demonstrated in research labs to
being implemented in standards and products, presenting new opportunities to
utilize its foundational concepts. Some of the most significant opportunities
include using FD to enable wireless networks to sense the physical environment,
integrate sensing and communication applications, develop integrated access and
backhaul solutions, and work with smart signal propagation environments powered
by reconfigurable intelligent surfaces. However, these new opportunities also
come with new challenges for large-scale commercial deployment of FD
technology, such as managing self-interference, combating cross-link
interference in multi-cell networks, and coexistence of dynamic time division
duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa
A Tutorial on Environment-Aware Communications via Channel Knowledge Map for 6G
Sixth-generation (6G) mobile communication networks are expected to have
dense infrastructures, large-dimensional channels, cost-effective hardware,
diversified positioning methods, and enhanced intelligence. Such trends bring
both new challenges and opportunities for the practical design of 6G. On one
hand, acquiring channel state information (CSI) in real time for all wireless
links becomes quite challenging in 6G. On the other hand, there would be
numerous data sources in 6G containing high-quality location-tagged channel
data, making it possible to better learn the local wireless environment. By
exploiting such new opportunities and for tackling the CSI acquisition
challenge, there is a promising paradigm shift from the conventional
environment-unaware communications to the new environment-aware communications
based on the novel approach of channel knowledge map (CKM). This article aims
to provide a comprehensive tutorial overview on environment-aware
communications enabled by CKM to fully harness its benefits for 6G. First, the
basic concept of CKM is presented, and a comparison of CKM with various
existing channel inference techniques is discussed. Next, the main techniques
for CKM construction are discussed, including both the model-free and
model-assisted approaches. Furthermore, a general framework is presented for
the utilization of CKM to achieve environment-aware communications, followed by
some typical CKM-aided communication scenarios. Finally, important open
problems in CKM research are highlighted and potential solutions are discussed
to inspire future work
- …