427 research outputs found

    Field research on the spectral properties of crops and soils, volume 1

    Get PDF
    The experiment design, data acquisition and preprocessing, data base management, analysis results and development of instrumentation for the AgRISTARS Supporting Research Project, Field Research task are described. Results of several investigations on the spectral reflectance of corn and soybean canopies as influenced by cultural practices, development stage and nitrogen nutrition are reported as well as results of analyses of the spectral properties of crop canopies as a function of canopy geometry, row orientation, sensor view angle and solar illumination angle are presented. The objectives, experiment designs and data acquired in 1980 for field research experiments are described. The development and performance characteristics of a prototype multiband radiometer, data logger, and aerial tower for field research are discussed

    Remote Sensing for Precision Nitrogen Management

    Get PDF
    This book focuses on the fundamental and applied research of the non-destructive estimation and diagnosis of crop leaf and plant nitrogen status and in-season nitrogen management strategies based on leaf sensors, proximal canopy sensors, unmanned aerial vehicle remote sensing, manned aerial remote sensing and satellite remote sensing technologies. Statistical and machine learning methods are used to predict plant-nitrogen-related parameters with sensor data or sensor data together with soil, landscape, weather and/or management information. Different sensing technologies or different modelling approaches are compared and evaluated. Strategies are developed to use crop sensing data for in-season nitrogen recommendations to improve nitrogen use efficiency and protect the environment

    Agricultural Research Service research highlights in remote sensing for calendar year 1981

    Get PDF
    Selected examples of research accomplishments related to remote sensing are compiled. A brief statement is given to highlight the significant results of each research project. A list of 1981 publication and location contacts is given also. The projects cover emission and reflectance analysis, identification of crop and soil parameters, and the utilization of remote sensing data

    Remote Sensing in Agriculture: State-of-the-Art

    Get PDF
    The Special Issue on “Remote Sensing in Agriculture: State-of-the-Art” gives an exhaustive overview of the ongoing remote sensing technology transfer into the agricultural sector. It consists of 10 high-quality papers focusing on a wide range of remote sensing models and techniques to forecast crop production and yield, to map agricultural landscape and to evaluate plant and soil biophysical features. Satellite, RPAS, and SAR data were involved. This preface describes shortly each contribution published in such Special Issue

    Solar Radiation Effect on Crop Production

    Get PDF

    Association of water spectral indices with plant and soil water relations in contrasting wheat genotypes

    Get PDF
    Spectral reflectance indices can be used to estimate the water status of plants in a rapid, non-destructive manner. Water spectral indices were measured on wheat under a range of water-deficit conditions in field-based yield trials to establish their relationship with water relations parameters as well as available volumetric soil water (AVSW) to indicate soil water extraction patterns. Three types of wheat germplasm were studied which showed a range of drought adaptation; near-isomorphic sister lines from an elite/elite cross, advanced breeding lines, and lines derived from interspecific hybridization with wild relatives (synthetic derivative lines). Five water spectral indices (one water index and four normalized water indices) based on near infrared wavelengths were determined under field conditions between the booting and grain-filling stages of crop development. Among all water spectral indices, one in particular, which was denominated as NWI-3, showed the most consistent associations with water relations parameters and demonstrated the strongest associations in all three germplasm sets. NWI-3 showed a strong linear relationship (r2 >0.6–0.8) with leaf water potential (ψleaf) across a broad range of values (–2.0 to –4.0 MPa) that were determined by natural variation in the environment associated with intra- and inter-seasonal affects. Association observed between NWI-3 and canopy temperature (CT) was consistent with the idea that genotypes with a better hydration status have a larger water flux (increased stomatal conductance) during the day. NWI-3 was also related to soil water potential (ψsoil) and AVSW, indicating that drought-adapted lines could extract more water from deeper soil profiles to maintain favourable water relations. NWI-3 was sufficiently sensitive to detect genotypic differences (indicated by phenotypic and genetic correlations) in water status at the canopy and soil levels indicating its potential application in precision phenotyping

    Reflectance of vegetation, soil, and water

    Get PDF
    The author has identified the following significant results. Bands 4, 5, and 7 and 5, 6, and 7 were best for distinguishing among crop and soil categories in ERTS-1 SCENES 1182-16322 (1-21-73) and 1308-16323 (5-21-73) respectively. Chlorotic sorghum areas 2.8 acres or larger in size were identified on a computer printout of band 5 data. Reflectance of crop residues was more often different from bare soil in band 4 than in bands 5, 6, and 7. Simultaneously acquired aircraft and spacecraft MSS data indicated that spacecraft surveys are as reliable as aircraft surveys. ERTS-1 data were successfully used to estimate acreage of citrus, cotton, and sorghum as well as idle crop land

    Modelling and remote sensing of canopy light interception and plant stress in greenhouses

    Get PDF
    A greenhouse crop can be approached as an open system that can be affected by a number of parameters such as light, climate or nutrient supply. In the last decades efforts have been made to understand the functioning of this system and the interaction between the different parameters. The intensive nature of greenhouse cultivation combined with the economic necessity to enlarge the farm size makes the development of decision support systems (DSS) imperative to help the growers in managing their farms efficiently. The foundation of DSS are plant models and in order to work more efficiently they should be able to receive information in real time from sensors that measure different plant parameters such as light interception, leaf area index and photosynthetic stress in a non-destructive way. In order to develop functional DSS it is imperative to develop accurate models and monitoring techniques applied in the specific greenhouse environment. The aim of this thesis was to explore different techniques to simulate and monitor light interception and photosynthesis by a greenhouse grown tomato canopy. Since photosynthesis is directly linked to light absorption we opted to develop a three dimensional model that takes into account the explicit plant architecture. Different methodologies to monitor these physiological properties online by means of remote sensing were also explored. A number of physiological tomato models have been proposed the last decades, their main challenge being the correct simulation of fruit yield. For this, an accurate simulation of light interception, and thus photosynthesis, is of primary importance. At present most process-based models and the majority of three dimensional models, include simplifications of plant architecture that can compromise the accuracy of light interception simulations and, accordingly, canopy photosynthesis. In Chapter 2.1 the first steps towards the development of the model are presented. Light interception is highly dependent on the canopy structure, which is affected, among others, by the distance between plant rows, the distance of plants within the row, leaf pruning and crop variety. The model was used to test different crop planting scenarios on their effect on light interception. Light interception from the planting scenarios was then compared with results of a totally homogeneous canopy. Also analysis of differences between manual measurements of leaf length, width, elevation angle and leaf orientation was conducted. Changes of leaf elevation angles at two different times of the day were also measured. In tomato differences in leaf length, width and elevation angle of the leaves were mainly observed in the upper 90cm of the plant, in the still developing zone. Changes of the architectural characteristics of structural plant characteristics affected directly light interception by the crop canopy. Nevertheless even if plant structure stayed the same, light penetration could easily be manipulated by changing the row spacing in the crop, thus affecting light interception and potentially plant production. In Chapter 2.2 the development and calibration of a functional-structural tomato model is fully described. The model was used to investigate the canopy heterogeneity of an explicitly described tomato canopy in relation to temporal dynamics of horizontal and vertical light distribution and photosynthesis under direct and diffuse light conditions. The model consists of an architectural static virtual plant coupled with a nested radiosity model for light absorption and a leaf photosynthesis module. Different scenarios for horizontal and vertical distributions of light interception, incident light and photosynthesis were investigated under diffuse and direct light conditions. Simulated light interception showed a good correspondence to the measured values. Explicitly described leaf elevation angles resulted in higher light interception in the middle of the plant canopy compared to fixed and ellipsoidal leaf elevation angle distribution models, although the total light interception remained the same. The fraction of light intercepted at a north-south orientation of rows differed from an east-west orientation by 10% in winter and 23% on summer days. The horizontal distribution of photosynthesis differed significantly between the top, middle and lower canopy layer. Taking into account the vertical variation of leaf photosynthetic parameters in the canopy, led to ca. 8% increase on simulated canopy photosynthesis. Manipulation of plant structure can strongly affect light distribution in the canopy and photosynthesis. In Chapter 2.3 the idea of identifying different plant ideotypes for optimization of light absorption and photosynthesis was explored. Using the functional-structural tomato model presented in the previous chapters, a range of different plant architectural characteristics were tested for two different seasons in order to find the optimal architecture with respect to light absorption and photosynthesis. Sensitivity analyses were carried out for leaf elevation angle, leaf phyllotaxis, leaflet angle, leaf shape, leaflet arrangement and internode length. From the results of this analysis two possible ideotypes were proposed. Increasing light absorption in the top part of the canopy by 25 %, without changing light absorption of the canopy as a whole, augmented photosynthesis by 6 % in winter and decreased it by 7 % in summer. The measured plant structure was already optimal with respect to leaf elevation angle, leaflet angle and leaflet arrangement for both light absorption and photosynthesis while phyllotaxis had no effect. Increasing the length-to-width ratio of leaves by 1.5 or increasing internode length from 7 to 12 cm led to an increase of 7 – 10 % for light absorption and photosynthesis. The most important architectural traits found were the internode length and the leaf shape as they affect vertical light distribution in the canopy distinctly. A new plant ideotype with more spacious canopy architecture due to long internodes and long and narrow leaves led to an increase in photosynthesis of up to 10 %. In Chapter 3.1 ways to monitor on-line LAI and PAR interception of the canopy, under greenhouse conditions, through reflectance measurements, were explored. LAI and PAR interception were measured at the same moments as reflectance at six wavelengths in different developmental stages of tomato and sweet pepper plants. Normalized Difference Vegetation Index (NDVI) was calculated. Relationships between the measured parameters were established in experimental greenhouses and subsequently these were tested in commercial greenhouses. The best estimation for LAI and PAR interception was obtained from reflectance at 460nm for both tomato and sweet pepper. The goodness of the fit was validated with data from the commercial greenhouses and was also tested in this study. The divergence of the results from the ones reported from field experiments can be traced back to the special greenhouse environment, where more sources of reflectance are added due to construction parts and a white plastic covered background. Reflectance measurements offer a non- destructive way to estimate PAR interception and LAI (up to the value of 3) in greenhouse production systems. The relationship established between reflectance at 460 nm, PAR interception and LAI for both tomato and sweet pepper, can become a good tool for crop online monitoring in greenhouse conditions. Furthermore if information from reflectance sensors is used as input directly into the crop models, new opportunities for decision support systems in greenhouse production could be opened up. Photosynthetic stress induced by water deprivation in plants affects a number of physiological processes such as photosynthetic rate, stomatal conductance as well as the operating efficiency of PSII and non- photochemical quenching. Photochemical Reflectance Index (PRI) is reported to be sensitive to changes of xanthophyll cycle that occur during stress and could possibly be used to monitor changes in the physiological parameters mentioned before. In Chapter 3.2 the use of PRI as an early photosynthetic stress indicator was evaluated. A water stress treatment was imposed on a greenhouse tomato crop. CO2 assimilation, stomatal conductance, light and dark adapted fluorescence as well as PRI and relative water content of the rooting medium RWCs% where repeatedly measured. The same measurements were also performed on well-irrigated plants that acted as a reference. The experiment was repeated in four consecutive weeks. Results showed that PRI can be used as an early stress indicator only when light intensity at crop level was above 700μmol m-2 s-1. At lower values of light intensity the relationship of PRI to RWCs% was poor in comparison to photosynthesis or fluorescence parameters that showed a high correlation to RWCs%. For that reason we can conclude that PRI as water stress indicator cannot be independent of the ambient light conditions and its use can make sense only under conditions of high light. Finally in Chapter 4 the main achievements and limitations of this study are discussed and directions for future research are proposed. </p
    corecore