Decentralized Output Sliding-Mode Fault-Tolerant Control for Heterogeneous Multiagent Systems

This paper proposes a novel decentralized output sliding-mode fault-tolerant control (FTC) design for heterogeneous multiagent systems (MASs) with matched disturbances, unmatched nonlinear interactions, and actuator faults. The respective iteration and iteration-free algorithms in the sliding-mode FTC scheme are designed with adaptive upper bounding laws to automatically compensate the matched and unmatched components. Then, a continuous fault-tolerant protocol in the observer-based integral sliding-mode design is developed to guarantee the asymptotic stability of MASs and the ultimate boundedness of the estimation errors. Simulation results validate the efficiency of the proposed FTC algorithm

Cooperative Control Reconfiguration in Networked Multi-Agent Systems

Development of a network of autonomous cooperating vehicles has attracted significant attention during the past few years due to its broad range of applications in areas such as autonomous underwater vehicles for exploring deep sea oceans, satellite formations for space missions, and mobile robots in industrial sites where human involvement is impossible or restricted, to name a few. Motivated by the stringent specifications and requirements for depth, speed, position or attitude of the team and the possibility of having unexpected actuators and sensors faults in missions for these vehicles have led to the proposed research in this thesis on cooperative fault-tolerant control design of autonomous networked vehicles. First, a multi-agent system under a fixed and undirected network topology and subject to actuator faults is studied. A reconfigurable control law is proposed and the so-called distributed Hamilton-Jacobi-Bellman equations for the faulty agents are derived. Then, the reconfigured controller gains are designed by solving these equations subject to the faulty agent dynamics as well as the network structural constraints to ensure that the agents can reach a consensus even in presence of a fault while simultaneously the team performance index is minimized. Next, a multi-agent network subject to simultaneous as well as subsequent actuator faults and under directed fixed topology and subject to bounded energy disturbances is considered. An H∞ performance fault recovery control strategy is proposed that guarantees: the state consensus errors remain bounded, the output of the faulty system behaves exactly the same as that of the healthy system, and the specified H∞ performance bound is guaranteed to be minimized. Towards this end, the reconfigured control law gains are selected first by employing a geometric control approach where a set of controllers guarantees that the output of the faulty agent imitates that of the healthy agent and the consensus achievement objectives are satisfied. Then, the remaining degrees of freedom in the selection of the control law gains are used to minimize the bound on a specified H∞ performance index. Then, control reconfiguration problem in a team subject to directed switching topology networks as well as actuator faults and their severity estimation uncertainties is considered. The consensus achievement of the faulty network is transformed into two stability problems, in which one can be solved offline while the other should be solved online and by utilizing information that each agent has received from the fault detection and identification module. Using quadratic and convex hull Lyapunov functions the control gains are designed and selected such that the team consensus achievement is guaranteed while the upper bound of the team cost performance index is minimized. Finally, a team of non-identical agents subject to actuator faults is considered. A distributed output feedback control strategy is proposed which guarantees that agents outputs’ follow the outputs of the exo-system and the agents states remains stable even when agents are subject to different actuator faults

Cognitive Vehicle Platooning in the Era of Automated Electric Transportation

Vehicle platooning is an important innovation in the automotive industry that aims at improving safety, mileage, efficiency, and the time needed to travel. This research focuses on the various aspects of vehicle platooning, one of the important aspects being analysis of different control strategies that lead to a stable and robust platoon. Safety of passengers being a very important consideration, the control design should be such that the controller remains robust under uncertain environments. As a part of the Department of Energy (DOE) project, this research also tries to show a demonstration of vehicle platooning using robots. In an automated highway scenario, a vehicle platoon can be thought of as a string of vehicles, following one another as a platoon. Being equipped by wireless communication capabilities, these vehicles communicate with one another to maintain their formation as a platoon, hence are cognitive. Autonomous capable vehicles in tightly spaced, computer-controlled platoons will lead to savings in energy due to reduced aerodynamic forces, as well as increased passenger comfort since there will be no sudden accelerations or decelerations. Impacts in the occurrence of collisions, if any, will be very low. The greatest benefit obtained is, however, an increase in highway capacity, along with reduction in traffic congestion, pollution, and energy consumption. Another aspect of this project is the automated electric transportation (AET). This aims at providing energy directly to vehicles from electric highways, thus reducing their energy consumption and CO2 emission. By eliminating the use of overhead wires, infrastructure can be upgraded by electrifying highways and providing energy on demand and in real time to moving vehicles via a wireless energy transfer phenomenon known as wireless inductive coupling. The work done in this research will help to gain an insight into vehicle platooning and the control system related to maintaining the vehicles in this formation

Fault-tolerant Synchronization of Autonomous Underwater Vehicles

The main objective of this thesis is to develop a fault-tolerant and reconfigurable synchronization scheme based on model-based control protocols for stern and sail hydroplanes that are employed as actuators in the attitude control subsystem (ACS) of an autonomous underwater vehicle (AUV). In this thesis two control approaches are considered for synchronization, namely i) state feedback synchronization, and ii) output feedback synchronization. Both problems are tackled by proposing a passive control approach as well as an active reconfiguration (re-designing the control gains). For the ”state feedback” synchronization scheme, to achieve consensus the relative/absolute measurements of the AUV’s states (position and attitude) are available. The states of a longitudinal model of an AUV are mainly heave, pitch, and their associated rates. For the state feedback problem we employ a static protocol, and it is shown that the multi-agent system will synchronize in the stochastic mean square sense in the presence of measurement noise. However, the resulting performance index defined as the accumulated sum of variations of control inputs and synchronization errors is high. To deal with this problem, Kalman filtering is used for states estimation that are used in synchronization protocol. Moreover, the e�ffects of parameter uncertainty of the agent’s dynamics are also investigated through simulation results. By employing the static protocol it is demonstrated that when a loss of e�ffectiveness (LOE) or float fault occurs the synchronization can still be achieved under some conditions. Finally, one of the main problems that is tackled in the state feedback scenario is our proposed proportional-integral (PI) control methodology to deal with the lock in place (LIP) fault. It is shown that if the LIP fault occurs, by employing a PI protocol the synchronization could still be achieved. Finally, our proposed dynamic synchronization protocol methodology is applied given that the fault (LOE/float) severity is known. Since after a fault occurrence the agents become heterogeneous, employing the dynamic scheme makes the task of reconfiguration (redesigning the gains) more e�ffective. For the ”output feedback” synchronization approach, to achieve consensus relative/absolute measurements of the AUV’s states except the pitch rate are available. For the output feedback problem a dynamic protocol through a Luenberger observer is first employed for state estimation and the synchronization achievement is demonstrated. Then, a system under state and measurement noise is considered, and it is shown that by employing a Kalman filter for the state estimation; the multi-agent system will synchronize in the stochastic mean square sense. Furthermore, by employing the static protocol, it is shown that when a LOE/float fault occurs the synchronization is still achieved under certain conditions. Finally, one of the main problems that is tackled in the output feedback scenario is our proposed dynamic controller methodology. The results of this scheme are compared with another approach that exploits both dynamic controller and dynamic observer. The former approach has less computational e�ort and results in more a robust control with respect to the actuator fault. The reason is that the later method employs an observer that uses the control input matrix information. When fault occurs, this information will not be correct any more. However, if there is a need to redesign the synchronization gains under faulty scenario, the later methodology is preferred. The reason is that the former approach becomes complicated when there is a fault even though its severity is known. In this thesis, fault-tolerant synchronization of autonomous underwater vehicles is considered. In the first chapter a brief introduction on the motivation, problem definition, objectives and the methodologies that are used in the dissertation are discussed. A literature review on research dedicated to synchronization, fault diagnosis, and fault-tolerant control is provided. In Chapter 2, a through literature review on unmanned underwater vehicles is covered. It also comprises a comprehensive background information and definitions including algebraic graph theory, matrix theory, and fault modeling. In the problem statement, the two main problems in this thesis, namely state feedback synchronization and output feedback synchronization are discussed. Chapters 3 and 4 will cover these two problems, their solutions, and the corresponding simulation results that are provided. Finally, Chapter 5 includes a discussion of conclusions and future work

Distributed Control of Networked Nonlinear Euler-Lagrange Systems

Motivated by recent developments in formation and cooperative control of networked multi-agent systems, the main goal of this thesis is development of efficient synchronization and formation control algorithms for distributed control of networked nonlinear systems whose dynamics can be described by Euler-Lagrange (EL) equations. One of the main challenges in the design of the formation control algorithm is its optimality and robustness to parametric uncertainties, external disturbances and ability to reconfigure in presence of component, actuator, or sensor faults. Furthermore, the controller should be capable of handling switchings in the communication network topology. In this work, nonlinear optimal control techniques are studied for developing distributed controllers for networked EL systems. An individual cost function is introduced to design a controller that relies on only local information exchanges among the agents. In the development of the controller, it is assumed that the communication graph is not fixed (in other words the topology is switching). Additionally, parametric uncertainties and faults in the EL systems are considered and two approaches, namely adaptive and robust techniques are introduced to compensate for the effects of uncertainties and actuator faults. Next, a distributed H_infinity performance measure is considered to develop distributed robust controllers for uncertain networked EL systems. The developed distributed controller is obtained through rigorous analysis and by considering an individual cost function to enhance the robustness of the controllers in presence of parametric uncertainties and external bounded disturbances. Moreover, a rigorous analysis is conducted on the performance of the developed controllers in presence of actuator faults as well as fault diagnostic and identification (FDI) imperfections. Next, synchronization and set-point tracking control of networked EL systems are investigated in presence of three constraints, namely, (i) input saturation constraints, (ii) unavailability of velocity feedback, and (iii) lack of knowledge on the system parameters. It is shown that the developed distributed controllers can accomplish the desired requirements and specification under the above constraints. Finally, a quaternion-based approach is considered for the attitude synchronization and set-point tracking control problem of formation flying spacecraft. Employing the quaternion in the control law design enables handling large rotations in the spacecraft attitude and, therefore, any singularities in the control laws are avoided. Furthermore, using the quaternion also enables one to guarantee boundedness of the control signals both with and without velocity feedback