Design and modelling of different SRAM's based on CNTFET 32nm technology

Carbon nanotube field-effect transistor (CNTFET) refers to a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure. Since it was first demonstrated in 1998, there have been tremendous developments in CNTFETs, which promise for an alternative material to replace silicon in future electronics. Carbon nanotubes are promising materials for the nano-scale electron devices such as nanotube FETs for ultra-high density integrated circuits and quantum-effect devices for novel intelligent circuits, which are expected to bring a breakthrough in the present silicon technology. A Static Random Access Memory (SRAM) is designed to plug two needs: i) The SRAM provides as cache memory, communicating between central processing unit and Dynamic Random Access Memory (DRAM). ii) The SRAM technology act as driving force for low power application since SRAM is portable compared to DRAM, and SRAM doesn't require any refresh current. On the basis of acquired knowledge, we present different SRAM's designed for the conventional CNTFET. HSPICE simulations of this circuit using Stanford CNTFET model shows a great improvement in power saving.Comment: 15 Page

A Holistic Solution for Reliability of 3D Parallel Systems

As device scaling slows down, emerging technologies such as 3D integration and carbon nanotube field-effect transistors are among the most promising solutions to increase device density and performance. These emerging technologies offer shorter interconnects, higher performance, and lower power. However, higher levels of operating temperatures and current densities project significantly higher failure rates. Moreover, due to the infancy of the manufacturing process, high variation, and defect densities, chip designers are not encouraged to consider these emerging technologies as a stand-alone replacement for Silicon-based transistors. The goal of this dissertation is to introduce new architectural and circuit techniques that can work around high-fault rates in the emerging 3D technologies, improving performance and reliability comparable to Silicon. We propose a new holistic approach to the reliability problem that addresses the necessary aspects of an effective solution such as detection, diagnosis, repair, and prevention synergically for a practical solution. By leveraging 3D fabric layouts, it proposes the underlying architecture to efficiently repair the system in the presence of faults. This thesis presents a fault detection scheme by re-executing instructions on idle identical units that distinguishes between transient and permanent faults while localizing it to the granularity of a pipeline stage. Furthermore, with the use of a dynamic and adaptive reconfiguration policy based on activity factors and temperature variation, we propose a framework that delivers a significant improvement in lifetime management to prevent faults due to aging. Finally, a design framework that can be used for large-scale chip production while mitigating yield and variation failures to bring up Carbon Nano Tube-based technology is presented. The proposed framework is capable of efficiently supporting high-variation technologies by providing protection against manufacturing defects at different granularities: module and pipeline-stage levels.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/168118/1/javadb_1.pd

Device and circuit-level models for carbon nanotube and graphene nanoribbon transistors

Metal-oxide semiconductor field-effect transistor (MOSFET) scaling throughout the years has enabled us to pack million of MOS transistors on a single chip to keep in pace with Moore’s Law. After forty years of advances in integrated circuit (IC) technology, the scaling of silicon (Si) MOSFET has entered the nanometer dimension with the introduction of 90 nm high volume manufacturing in 2004. The latest technological advancement has led to a low power, high-density and high-speed generation of processor. Nevertheless, the scaling of the Si MOSFET below 22 nm may soon meet its’ fundamental physical limitations. This threshold makes the possible use of novel devices and structures such as carbon nanotube field-effect transistors (CNTFETs) and graphene nanoribbon field-effect transistors (GNRFETs) for future nanoelectronics. The investigation explores the potential of these amazing carbon structures that exceed MOSFET capabilities in term of speed, scalability and power consumption. The research findings demonstrate the potential integration of carbon based technology into existing ICs. In particular, a simulation program with integrated circuit emphasis (SPICE) model for CNTFET and GNRFET in digital logic applications is presented. The device performance of these circuit models and their design layout are then compared to 45 nm and 90 nm MOSFET for benchmarking. It is revealed through the investigation that CNT and GNR channels can overcome the limitations imposed by Si channel length scaling and associated short channel effects while consuming smaller channel area at higher current density

Polarity Control at Runtime:from Circuit Concept to Device Fabrication

Semiconductor device research for digital circuit design is currently facing increasing challenges to enhance miniaturization and performance. A huge economic push and the interest in novel applications are stimulating the development of new pathways to overcome physical limitations affecting conventional CMOS technology. Here, we propose a novel Schottky barrier device concept based on electrostatic polarity control. Specifically, this device can behave as p- or n-type by simply changing an electric input bias. This device combines More-than-Moore and Beyond CMOS elements to create an efficient technology with a viable path to Very Large Scale Integration (VLSI). This thesis proposes a device/circuit/architecture co-optimization methodology, where aspects of device technology to logic circuit and system design are considered. At device level, a full CMOS compatible fabrication process is presented. In particular, devices are demonstrated using vertically stacked, top-down fabricated silicon nanowires with gate-all-around electrode geometry. Source and drain contacts are implemented using nickel silicide to provide quasi-symmetric conduction of either electrons or holes, depending on the mode of operation. Electrical measurements confirm excellent performance, showing Ion/Ioff > 10^7 and subthreshold slopes approaching the thermal limit, SS ~ 60mV/dec (~ 63mV/dec) for n(p)-type operation in the same physical device. Moreover, the shown devices behave as p-type for a polarization bias (polarity gate voltage, Vpg) of 0V, and n-type for a Vpg = 1V, confirming their compatibility with multi-level static logic circuit design. At logic gate level, two- and four-transistor logic gates are fabricated and tested. In particular, the first fully functional, two-transistor XOR logic gate is demonstrated through electrical characterization, confirming that polarity control can enable more compact logic gate design with respect to conventional CMOS. Furthermore, we show for the first time fabricated four- transistors logic gates that can be reconfigured as NAND or XOR only depending on their external connectivity. In this case, logic gates with full swing output range are experimentally demonstrated. Finally, single device and mixed-mode TCAD simulation results show that lower Vth and more optimized polarization ranges can be expected in scaled devices implementing strain or high-k technologies. At circuit and system level, a full semi-custom logic circuit design tool flow was defined and configured. Using this flow, novel logic libraries based on standard cells or regular gate fabrics were compared with standard CMOS. In this respect, results were shown in comparison to CMOS, including a 40% normalized area-delay product reduction for the analyzed standard cell libraries, and improvements of over 2× in terms of normalized delay for regular Controlled Polarity (CP)-based cells in the context of Structured ASICs. These results, in turn, confirm the interest in further developing and optimizing CP devices, as promising candidates for future digital circuit technology

Imperfection-Aware Design of CNFET Digital VLSI Circuits

Carbon nanotube field-effect transistor (CNFET) is one of the promising candidates as extensions to silicon CMOS devices. The CNFET, which is a 1-D structure with a near-ballistic transport capability, can potentially offer excellent device characteristics and order-of-magnitude better energy-delay product over standard CMOS devices. Significant challenges in CNT synthesis prevent CNFETs today from achieving such ideal benefits. CNT density variation and metallic CNTs are the dominant type of CNT variations/imperfections that cause performance variation, large static power consumption, and yield degradation. We present an imperfection-aware design technique for CNFET digital VLSI circuits by: 1) Analytical models that are developed to analyze and quantify the effects of CNT density variation on device characteristics, gate and system levels delays. The analytical models, which were validated by comparison to real experimental/simulation data, enables us to examine the space of CNFET combinational, sequential and memory cells circuits to minimize delay variations. Using these model, we drive CNFET processing and circuit design guidelines to manage/overcome CNT density variation. 2) Analytical models that are developed to analyze the effects of metallic CNTs on device characteristics, gate and system levels delay and power consumption. Using our presented analytical models, which are again validated by comparison with simulation data, it is shown that the static power dissipation is a more critical issue than the delay and the dynamic power of CNFET circuits in the presence of m-CNTs. 3) CNT density variation and metallic CNTs can result in functional failure of CNFET circuits. The complete and compact model for CNFET probability of failure that consider CNT density variation and m-CNTs is presented. This analytical model is applied to analyze the logical functional failures. The presented model is extended to predict opportunities and limitations of CNFET technology at todays Gigascale integration and beyond.\u2

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

MFPA: Mixed-Signal Field Programmable Array for Energy-Aware Compressive Signal Processing

Compressive Sensing (CS) is a signal processing technique which reduces the number of samples taken per frame to decrease energy, storage, and data transmission overheads, as well as reducing time taken for data acquisition in time-critical applications. The tradeoff in such an approach is increased complexity of signal reconstruction. While several algorithms have been developed for CS signal reconstruction, hardware implementation of these algorithms is still an area of active research. Prior work has sought to utilize parallelism available in reconstruction algorithms to minimize hardware overheads; however, such approaches are limited by the underlying limitations in CMOS technology. Herein, the MFPA (Mixed-signal Field Programmable Array) approach is presented as a hybrid spin-CMOS reconfigurable fabric specifically designed for implementation of CS data sampling and signal reconstruction. The resulting fabric consists of 1) slice-organized analog blocks providing amplifiers, transistors, capacitors, and Magnetic Tunnel Junctions (MTJs) which are configurable to achieving square/square root operations required for calculating vector norms, 2) digital functional blocks which feature 6-input clockless lookup tables for computation of matrix inverse, and 3) an MRAM-based nonvolatile crossbar array for carrying out low-energy matrix-vector multiplication operations. The various functional blocks are connected via a global interconnect and spin-based analog-to-digital converters. Simulation results demonstrate significant energy and area benefits compared to equivalent CMOS digital implementations for each of the functional blocks used: this includes an 80% reduction in energy and 97% reduction in transistor count for the nonvolatile crossbar array, 80% standby power reduction and 25% reduced area footprint for the clockless lookup tables, and roughly 97% reduction in transistor count for a multiplier built using components from the analog blocks. Moreover, the proposed fabric yields 77% energy reduction compared to CMOS when used to implement CS reconstruction, in addition to latency improvements

Robustness Analysis of Controllable-Polarity Silicon Nanowire Devices and Circuits

Substantial downscaling of the feature size in current CMOS technology has confronted digital designers with serious challenges including short channel effect and high amount of leakage power. To address these problems, emerging nano-devices, e.g., Silicon NanoWire FET (SiNWFET), is being introduced by the research community. These devices keep on pursuing Mooreâs Law by improving channel electrostatic controllability, thereby reducing the Off âstate leakage current. In addition to these improvements, recent developments introduced devices with enhanced capabilities, such as Controllable-Polarity (CP) SiNWFETs, which make them very interesting for compact logic cell and arithmetic circuits. At advanced technology nodes, the amount of physical controls, during the fabrication process of nanometer devices, cannot be precisely determined because of technology fluctuations. Consequently, the structural parameters of fabricated circuits can be significantly different from their nominal values. Moreover, giving an a-priori conclusion on the variability of advanced technologies for emerging nanoscale devices, is a difficult task and novel estimation methodologies are required. This is a necessity to guarantee the performance and the reliability of future integrated circuits. Statistical analysis of process variation requires a great amount of numerical data for nanoscale devices. This introduces a serious challenge for variability analysis of emerging technologies due to the lack of fast simulation models. One the one hand, the development of accurate compact models entails numerous tests and costly measurements on fabricated devices. On the other hand, Technology Computer Aided Design (TCAD) simulations, that can provide precise information about devices behavior, are too slow to timely generate large enough data set. In this research, a fast methodology for generating data set for variability analysis is introduced. This methodology combines the TCAD simulations with a learning algorithm to alleviate the time complexity of data set generation. Another formidable challenge for variability analysis of the large circuits is growing number of process variation sources. Utilizing parameterized models is becoming a necessity for chip design and verification. However, the high dimensionality of parameter space imposes a serious problem. Unfortunately, the available dimensionality reduction techniques cannot be employed for three main reasons of lack of accuracy, distribution dependency of the data points, and finally incompatibility with device and circuit simulators. We propose a novel technique of parameter selection for modeling process and performance variation. The proposed technique efficiently addresses the aforementioned problems. Appropriate testing, to capture manufacturing defects, plays an important role on the quality of integrated circuits. Compared to conventional CMOS, emerging nano-devices such as CP-SiNWFETs have different fabrication process steps. In this case, current fault models must be extended for defect detection. In this research, we extracted the possible fabrication defects, and then proposed a fault model for this technology. We also provided a couple of test methods for detecting the manufacturing defects in various types of CP-SiNWFET logic gates. Finally, we used the obtained fault model to build fault tolerant arithmetic circuits with a bunch of superior properties compared to their competitors

Cost-Efficient Soft-Error Resiliency for ASIP-based Embedded Systems

Recent decades have witnessed the rapid growth of embedded systems. At present, embedded systems are widely applied in a broad range of critical applications including automotive electronics, telecommunication, healthcare, industrial electronics, consumer electronics military and aerospace. Human society will continue to be greatly transformed by the pervasive deployment of embedded systems. Consequently, substantial amount of efforts from both industry and academic communities have contributed to the research and development of embedded systems. Application-specific instruction-set processor (ASIP) is one of the key advances in embedded processor technology, and a crucial component in some embedded systems. Soft errors have been directly observed since the 1970s. As devices scale, the exponential increase in the integration of computing systems occurs, which leads to correspondingly decrease in the reliability of computing systems. Today, major research forums state that soft errors are one of the major design technology challenges at and beyond the 22 nm technology node. Therefore, a large number of soft-error solutions, including error detection and recovery, have been proposed from differing perspectives. Nonetheless, most of the existing solutions are designed for general or high-performance systems which are different to embedded systems. For embedded systems, the soft-error solutions must be cost-efficient, which requires the tailoring of the processor architecture with respect to the feature of the target application. This thesis embodies a series of explorations for cost-efficient soft-error solutions for ASIP-based embedded systems. In this exploration, five major solutions are proposed. The first proposed solution realizes checkpoint recovery in ASIPs. By generating customized instructions, ASIP-implemented checkpoint recovery can perform at a finer granularity than what was previously possible. The fault-free performance overhead of this solution is only 1.45% on average. The recovery delay is only 62 cycles at the worst case. The area and leakage power overheads are 44.4% and 45.6% on average. The second solution explores utilizing two primitive error recovery techniques jointly. This solution includes three application-specific optimization methodologies. This solution generates the optimized error-resilient ASIPs, based on the characteristics of primitive error recovery techniques, static reliability analysis and design constraints. The resultant ASIP can be configured to perform at runtime according to the optimized recovery scheme. This solution can strategically enhance cost-efficiency for error recovery. In order to guarantee cost-efficiency in unpredictable runtime situations, the third solution explores runtime adaptation for error recovery. This solution aims to budget and adapt the error recovery operations, so as to spend the resources intelligently and to tolerate adverse influences of runtime variations. The resultant ASIP can make runtime decisions to determine the activation of spatial and temporal redundancies, according to the runtime situations. At the best case, this solution can achieve almost 50x reliability gain over the state of the art solutions. Given the increasing demand for multi-core computing systems, the last two proposed solutions target error recovery in multi-core ASIPs. The first solution of these two explores ASIP-implemented fine-grained process migration. This solution is a key infrastructure, which allows cost-efficient task management, for realizing cost-efficient soft-error recovery in multi-core ASIPs. The average time cost is only 289 machine cycles to perform process migration. The last solution explores using dynamic and adaptive mapping to assign heterogeneous recovery operations to the tasks in the multi-core context. This solution allows each individual ASIP-based processing core to dynamically adapt its specific error recovery functionality according to the corresponding task's characteristics, in terms of soft error vulnerability and execution time deadline. This solution can significantly improve the reliability of the system by almost two times, with graceful constraint penalty, in comparison to the state-of-the-art counterparts

A hierarchical optimization engine for nanoelectronic systems using emerging device and interconnect technologies

A fast and efficient hierarchical optimization engine was developed to benchmark and optimize various emerging device and interconnect technologies and system-level innovations at the early design stage. As the semiconductor industry approaches sub-20nm technology nodes, both devices and interconnects are facing severe physical challenges. Many novel device and interconnect concepts and system integration techniques are proposed in the past decade to reinforce or even replace the conventional Si CMOS technology and Cu interconnects. To efficiently benchmark and optimize these emerging technologies, a validated system-level design methodology is developed based on the compact models from all hierarchies, starting from the bottom material-level, to the device- and interconnect-level, and to the top system-level models. Multiple design parameters across all hierarchies are co-optimized simultaneously to maximize the overall chip throughput instead of just the intrinsic delay or energy dissipation of the device or interconnect itself. This optimization is performed under various constraints such as the power dissipation, maximum temperature, die size area, power delivery noise, and yield. For the device benchmarking, novel graphen PN junction devices and InAs nanowire FETs are investigated for both high-performance and low-power applications. For the interconnect benchmarking, a novel local interconnect structure and hybrid Al-Cu interconnect architecture are proposed, and emerging multi-layer graphene interconnects are also investigated, and compared with the conventional Cu interconnects. For the system-level analyses, the benefits of the systems implemented with 3D integration and heterogeneous integration are analyzed. In addition, the impact of the power delivery noise and process variation for both devices and interconnects are quantified on the overall chip throughput.Ph.D