115,753 research outputs found
Recommended from our members
Layout area models for high-level synthesis
Traditionally, the common cost functions, the number of functional units, registers and selector inputs, are used in high level synthesis as quality measures. However, these traditional design quality measures may not reflect the real physical design. To establish quality measures based on the physical designs, we propose layout estimation models for two commonly used data path and control layout architectures. The results show that quality measures deriving from our models give an accurate prediction of the final layout. The results also show that traditional cost functions are not good indicators for optimization in high level synthesis
Recommended from our members
Timing models for high-level synthesis
In this paper, we describe a timing model for clock estimation during high-level synthesis. In order to obtain realistic timing estimates, the proposed model considers all delay elements, including datapath, control and wire delays, and several technology factors, such as layout architecture, technology mapping, buffers insertion and loading effects. The experimental results show that this model can provide much better estimates than previous models. This model is well suited for automatic and interactive synthesis as well as feedback-driven synthesis where performance matrices must be rapidly and incrementally calculated
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
Recommended from our members
Back-annotation for interactive data path synthesis
In order to take into account physical design effects, a designer needs a feedback mechanism during interactive data path synthesis. In this paper, we propose a hypergraph model and a back-annotation algorithm which provide a feedback mechanism for back-annotation from physical designs to behavioral descriptions. Given a control data flow graph and its structural design, this back-annotation technique cannot only evaluate the design quality but can also feedback the delay to each edge and node in the graph. Therefore, a designer can identify the critical paths and improve the design. The hypergraph model and the back-annotation algorithm allow us to bridge the gap between the behavioral description and the physical design
Recommended from our members
Silicon compilation
Silicon compilation is a term used for many different purposes. In this paper we define silicon compilation as a mapping from some higher level description into layout. We define the basic issues in structural and behavioral silicon compilation and some possible solutions to those issues. Finally, we define the concept of an intelligent silicon compiler in which the compiler evaluates the quality of the generated design and attempts to improve it if it is not satisfactory
Geometrically-constrained, parasitic-aware synthesis of analog ICs
In order to speed up the design process of analog ICs, iterations between different design stages should be avoided as much as possible. More specifically, spins between electrical and physical synthesis should be reduced for this is a very time-consuming task: if circuit performance including layout-induced degradations proves unacceptable, a re-design cycle must be entered, and electrical, physical, or both synthesis processes, would have to be repeated. It is also worth noting that if geometric optimization (e.g., area minimization) is undertaken after electrical synthesis, it may add up as another source of unexpected degradation of the circuit performance due to the impact of the geometric variables (e.g., transistor folds) on the device and the routing parasitic values. This awkward scenario is caused by the complete separation of said electrical and physical synthesis, a design practice commonly followed so far. Parasitic-aware synthesis, consisting in including parasitic estimates to the circuit netlist directly during electrical synthesis, has been proposed as solution. While most of the reported contributions either tackle parasitic-aware synthesis without paying special attention to geometric optimization or approach both issues only partially, this paper addresses the problem in a unified way. In what has been called layout-aware electrical synthesis, a simulation-based optimization algorithm explores the design space with geometric variables constrained to meet certain user-defined goals, which provides reliable estimates of layout-induced parasitics at each iteration, and, thereby, accurate evaluation of the circuit ultimate performance. This technique, demonstrated here through several design examples, requires knowing layout details beforehand; to facilitate this, procedural layout generation is used as physical synthesis approach due to its rapidness and ability to capture analog layout know-how.Ministerio de Educación y Ciencia TEC2004-0175
A Reuse-based framework for the design of analog and mixed-signal ICs
Despite the spectacular breakthroughs of the semiconductor industry, the ability to design integrated circuits (ICs) under stringent time-to-market (TTM) requirements is lagging behind integration capacity, so far keeping pace with still valid Moore's Law. The resulting gap is threatening with slowing down such a phenomenal growth. The design community believes that it is only by means of powerful CAD tools and design methodologies -and, possibly, a design paradigm shift-that this design gap can be bridged. In this sense, reuse-based design is seen as a promising solution, and concepts such as IP Block, Virtual Component, and Design Reuse have become commonplace thanks to the significant advances in the digital arena. Unfortunately, the very nature of analog and mixed-signal (AMS) design has hindered a similar level of consensus and development. This paper presents a framework for the reuse-based design of AMS circuits. The framework is founded on three key elements: (1) a CAD-supported hierarchical design flow that facilitates the incorporation of AMS reusable blocks, reduces the overall design time, and expedites the management of increasing AMS design complexity; (2) a complete, clear definition of the AMS reusable block, structured into three separate facets or views: the behavioral, structural, and layout facets, the two first for top-down electrical synthesis and bottom-up verification, the latter used during bottom-up physical synthesis; (3) the design for reusability set of tools, methods, and guidelines that, relying on intensive parameterization as well as on design knowledge capture and encapsulation, allows to produce fully reusable AMS blocks. A case study and a functional silicon prototype demonstrate the validity of the paper's proposals.Ministerio de Educación y Ciencia TEC2004-0175
- …