High-Performance Robust Latches

First, a new high-performance robust latch (referred to as HiPeR latch) is presented that is insensitive to transient faults affecting its internal and output nodes by design, independently of the size of its transistors. Then, a modified version of the HiPeR latch (referred as HiPeR-CG) is proposed that is suitable to be used together with clock gating. Both proposed latches are faster than the latches most recently presented in the literature, while providing better or comparable robustness to transient faults, at comparable or lower costs in terms of area and power, respectively. Therefore, thanks to the good trade-offs in terms of performance, robustness, and cost, our proposed latches are particularly suitable to be adopted on critical paths

Soft-Error Resilience Framework For Reliable and Energy-Efficient CMOS Logic and Spintronic Memory Architectures

The revolution in chip manufacturing processes spanning five decades has proliferated high performance and energy-efficient nano-electronic devices across all aspects of daily life. In recent years, CMOS technology scaling has realized billions of transistors within large-scale VLSI chips to elevate performance. However, these advancements have also continually augmented the impact of Single-Event Transient (SET) and Single-Event Upset (SEU) occurrences which precipitate a range of Soft-Error (SE) dependability issues. Consequently, soft-error mitigation techniques have become essential to improve systems\u27 reliability. Herein, first, we proposed optimized soft-error resilience designs to improve robustness of sub-micron computing systems. The proposed approaches were developed to deliver energy-efficiency and tolerate double/multiple errors simultaneously while incurring acceptable speed performance degradation compared to the prior work. Secondly, the impact of Process Variation (PV) at the Near-Threshold Voltage (NTV) region on redundancy-based SE-mitigation approaches for High-Performance Computing (HPC) systems was investigated to highlight the approach that can realize favorable attributes, such as reduced critical datapath delay variation and low speed degradation. Finally, recently, spin-based devices have been widely used to design Non-Volatile (NV) elements such as NV latches and flip-flops, which can be leveraged in normally-off computing architectures for Internet-of-Things (IoT) and energy-harvesting-powered applications. Thus, in the last portion of this dissertation, we design and evaluate for soft-error resilience NV-latching circuits that can achieve intriguing features, such as low energy consumption, high computing performance, and superior soft errors tolerance, i.e., concurrently able to tolerate Multiple Node Upset (MNU), to potentially become a mainstream solution for the aerospace and avionic nanoelectronics. Together, these objectives cooperate to increase energy-efficiency and soft errors mitigation resiliency of larger-scale emerging NV latching circuits within iso-energy constraints. In summary, addressing these reliability concerns is paramount to successful deployment of future reliable and energy-efficient CMOS logic and spintronic memory architectures with deeply-scaled devices operating at low-voltages

IC design for reliability

textAs the feature size of integrated circuits goes down to the nanometer scale, transient and permanent reliability issues are becoming a significant concern for circuit designers. Traditionally, the reliability issues were mostly handled at the device level as a device engineering problem. However, the increasing severity of reliability challenges and higher error rates due to transient upsets favor higher-level design for reliability (DFR). In this work, we develop several methods for DFR at the circuit level. A major source of transient errors is the single event upset (SEU). SEUs are caused by high-energy particles present in the cosmic rays or emitted by radioactive contaminants in the chip packaging materials. When these particles hit a N+/P+ depletion region of an MOS transistor, they may generate a temporary logic fault. Depending on where the MOS transistor is located and what state the circuit is at, an SEU may result in a circuit-level error. We analyze SEUs both in combinational logic and memories (SRAM). For combinational logic circuit, we propose FASER, a Fast Analysis tool of Soft ERror susceptibility for cell-based designs. The efficiency of FASER is achieved through its static and vector-less nature. In order to evaluate the impact of SEU on SRAM, a theory for estimating dynamic noise margins is developed analytically. The results allow predicting the transient error susceptibility of an SRAM cell using a closedform expression. Among the many permanent failure mechanisms that include time-dependent oxide breakdown (TDDB), electro-migration (EM), hot carrier effect (HCE), and negative bias temperature instability (NBTI), NBTI has recently become important. Therefore, the main focus of our work is NBTI. NBTI occurs when the gate of PMOS is negatively biased. The voltage stress across the gate generates interface traps, which degrade the threshold voltage of PMOS. The degraded PMOS may eventually fail to meet timing requirement and cause functional errors. NBTI becomes severe at elevated temperatures. In this dissertation, we propose a NBTI degradation model that takes into account the temperature variation on the chip and gives the accurate estimation of the degraded threshold voltage. In order to account for the degradation of devices, traditional design methods add guard-bands to ensure that the circuit will function properly during its lifetime. However, the worst-case based guard-bands lead to significant penalty in performance. In this dissertation, we propose an effective macromodel-based reliability tracking and management framework, based on a hybrid network of on-chip sensors, consisting of temperature sensors and ring oscillators. The model is concerned specifically with NBTIinduced transistor aging. The key feature of our work, in contrast to the traditional tracking techniques that rely solely on direct measurement of the increase of threshold voltage or circuit delay, is an explicit macromodel which maps operating temperature to circuit degradation (the increase of circuit delay). The macromodel allows for costeffective tracking of reliability using temperature sensors and is also essential for enabling the control loop of the reliability management system. The developed methods improve the over-conservatism of the device-level, worstcase reliability estimation techniques. As the severity of reliability challenges continue to grow with technology scaling, it will become more important for circuit designers/CAD tools to be equipped with the developed methods.Electrical and Computer Engineerin

Radiation Tolerant Electronics, Volume II

Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade.After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

STUDY OF SINGLE-EVENT EFFECTS ON DIGITAL SYSTEMS

Microelectronic devices and systems have been extensively utilized in a variety of radiation environments, ranging from the low-earth orbit to the ground level. A high-energy particle from such an environment may cause voltage/current transients, thereby inducing Single Event Effect (SEE) errors in an Integrated Circuit (IC). Ever since the first SEE error was reported in 1975, this community has made tremendous progress in investigating the mechanisms of SEE and exploring radiation tolerant techniques. However, as the IC technology advances, the existing hardening techniques have been rendered less effective because of the reduced spacing and charge sharing between devices. The Semiconductor Industry Association (SIA) roadmap has identified radiation-induced soft errors as the major threat to the reliable operation of electronic systems in the future. In digital systems, hardening techniques of their core components, such as latches, logic, and clock network, need to be addressed. Two single event tolerant latch designs taking advantage of feedback transistors are presented and evaluated in both single event resilience and overhead. These feedback transistors are turned OFF in the hold mode, thereby yielding a very large resistance. This, in turn, results in a larger feedback delay and higher single event tolerance. On the other hand, these extra transistors are turned ON when the cell is in the write mode. As a result, no significant write delay is introduced. Both designs demonstrate higher upset threshold and lower cross-section when compared to the reference cells. Dynamic logic circuits have intrinsic single event issues in each stage of the operations. The worst case occurs when the output is evaluated logic high, where the pull-up networks are turned OFF. In this case, the circuit fails to recover the output by pulling the output up to the supply rail. A capacitor added to the feedback path increases the node capacitance of the output and the feedback delay, thereby increasing the single event critical charge. Another differential structure that has two differential inputs and outputs eliminates single event upset issues at the expense of an increased number of transistors. Clock networks in advanced technology nodes may cause significant errors in an IC as the devices are more sensitive to single event strikes. Clock mesh is a widely used clocking scheme in a digital system. It was fabricated in a 28nm technology and evaluated through the use of heavy ions and laser irradiation experiments. Superior resistance to radiation strikes was demonstrated during these tests. In addition to mitigating single event issues by using hardened designs, built-in current sensors can be used to detect single event induced currents in the n-well and, if implemented, subsequently execute fault correction actions. These sensors were simulated and fabricated in a 28nm CMOS process. Simulation, as well as, experimental results, substantiates the validity of this sensor design. This manifests itself as an alternative to existing hardening techniques. In conclusion, this work investigates single event effects in digital systems, especially those in deep-submicron or advanced technology nodes. New hardened latch, dynamic logic, clock, and current sensor designs have been presented and evaluated. Through the use of these designs, the single event tolerance of a digital system can be achieved at the expense of varying overhead in terms of area, power, and delay

STAHL: A Novel Scan-Test-Aware Hardened Latch Design

As modern technology nodes become more susceptible to soft errors, many radiation hardened latch designs have been proposed. However, redundant circuitry used to tolerate soft errors in such hardened latches also reduces the test coverage of cell-internal manufacturing defects. To avoid potential test escapes that lead to soft error vulnerability and reliability issues, this paper proposes a novel Scan-Test-Aware Hardened Latch (STAHL). Simulation results show that STAHL has superior defect coverage compared to previous hardened latches while maintaining full radiation hardening in function mode.24th IEEE European Test Symposium (ETS\u2719), May 27-31, 2019, Baden-Baden, German