52 research outputs found
Empirical Rates Characterization of Wearable Multi-Antenna Terminals for First-Responders
Empirical characterization of the achievable rates for a wearable multi-antenna terminal shows the potential advantages of deploying a large number of antennas at the user end. We focus on the challenges and requirements of the broadband communication in future emergency communication systems, specifically addressing the outdoor-to-indoor propagation scenario, where the first responder is within an underground area such as a garage or basement. The measurement campaign undertaken characterizes the flat fading multiple-input multiple-output (MIMO) channel matrices at 3.5 GHz for a maximum of M = 30 antennas deployed at the base station (BS), and N = 12 wearable antennas at the user. The achievable rates are obtained for two transmission strategies that account for the different levels of channel knowledge. In both cases, all the MIMO processing is carried out at the BS.This work was supported in part by the Spanish Government under Project MIMOTEX (TEC2014-61776-EXP), Project CIES (RTC-2015-4213-7), and Project TERESA-ADA (TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE), and in part by the Chilean Government through projects CONICYT under Grant Proyecto Basal FB0821, Grant Fondecyt Iniciación 11171159, and Grant VRIEA-PUCV 039.462/2017.Publicad
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Dual-polarized spatial-temporal propagation measurement and modeling in uma o2i scenario at 3.5 GHz
Outdoor-to-indoor (O2I) coverage in urban areas by using the sub-6 GHz (sub-6G) band is important in the fifth generation (5G) mobile communication system. The spatial-temporal propagation characteristics in different polarizations in the 5G spectrum are crucial for the network coverage. In this paper, we measured the urban macrocell (UMa) O2I channels at 3.5 GHz in the space, time, and polarization domains simultaneously. The channel sounder utilized two ±45° polarized antenna arrays. The transmitter (TX) was placed on the rooftop of a five-storey building to emulate a base station and the receiver (RX) was moved in the corridors on different floors in another building to emulate user equipments (UEs). We obtained the small-scale parameters of excess delay, power, and azimuth/elevation of arrival (AoA/EoA) of individual multipath components (MPCs), the propagation profiles of azimuth/elevation power spectrum (APS/EPS) and power delay profile (PDP), and the large-scale parameters including azimuth/elevation spread of arrival (ASA/ESA) and delay spread (DS). Based on the measurement results, we propose the lifted-superposed Laplace distribution (LS-Laplace) function and lifted-superposed normal distribution (LS-Normal) function to model the APS and EPS, respectively, and a three-phase model for the PDP. We find that the ASA and ESA follow the lognormal distribution and the DS has a Rayleigh distribution. We also reveal the impact of surrounding environments and polarization on the channel propagation profiles and statistical characteristics. The measurement results and channel models in this paper provide reference for the design and deployment of the 5G system to exploit the spatial and polarization diversities in the UMa O2I scenario.This work was supported in part by the National Natural Science Foundation of China under Grant 61571370, Grant 61601365, and Grant 61801388, in part by the Key Research Program and Industrial Innovation Chain Project of Shaanxi Province under Grant 2019ZDLGY07-10, Grant 2019JQ-253, and Grant 2019JM-345, and in part by the China Postdoctoral Science Foundation under Grant BX20180262, Grant BX20190287, Grant 2018M641020, and Grant 2018M641019.Scopu
State-of-the-art assessment of 5G mmWave communications
Deliverable D2.1 del proyecto 5GWirelessMain objective of the European 5Gwireless project, which is part of the H2020 Marie Slodowska-
Curie ITN (Innovative Training Networks) program resides in the training and involvement of young
researchers in the elaboration of future mobile communication networks, focusing on innovative
wireless technologies, heterogeneous network architectures, new topologies (including ultra-dense
deployments), and appropriate tools. The present Document D2.1 is the first deliverable of Work-
Package 2 (WP2) that is specifically devoted to the modeling of the millimeter-wave (mmWave)
propagation channels, and development of appropriate mmWave beamforming and signal
processing techniques. Deliver D2.1 gives a state-of-the-art on the mmWave channel measurement,
characterization and modeling; existing antenna array technologies, channel estimation and
precoding algorithms; proposed deployment and networking techniques; some performance
studies; as well as a review on the evaluation and analysis toolsPostprint (published version
Ondas milimétricas e MIMO massivo para otimização da capacidade e cobertura de redes heterogeneas de 5G
Today's Long Term Evolution Advanced (LTE-A) networks cannot support
the exponential growth in mobile traffic forecast for the next decade. By
2020, according to Ericsson, 6 billion mobile subscribers worldwide are projected
to generate 46 exabytes of mobile data traffic monthly from 24 billion
connected devices, smartphones and short-range Internet of Things (IoT)
devices being the key prosumers. In response, 5G networks are foreseen
to markedly outperform legacy 4G systems. Triggered by the International
Telecommunication Union (ITU) under the IMT-2020 network initiative, 5G
will support three broad categories of use cases: enhanced mobile broadband
(eMBB) for multi-Gbps data rate applications; ultra-reliable and low latency
communications (URLLC) for critical scenarios; and massive machine
type communications (mMTC) for massive connectivity. Among the several
technology enablers being explored for 5G, millimeter-wave (mmWave)
communication, massive MIMO antenna arrays and ultra-dense small cell
networks (UDNs) feature as the dominant technologies. These technologies
in synergy are anticipated to provide the 1000_ capacity increase for 5G
networks (relative to 4G) through the combined impact of large additional
bandwidth, spectral efficiency (SE) enhancement and high frequency reuse,
respectively. However, although these technologies can pave the way towards
gigabit wireless, there are still several challenges to solve in terms of
how we can fully harness the available bandwidth efficiently through appropriate
beamforming and channel modeling approaches. In this thesis, we
investigate the system performance enhancements realizable with mmWave
massive MIMO in 5G UDN and cellular infrastructure-to-everything (C-I2X)
application scenarios involving pedestrian and vehicular users. As a critical
component of the system-level simulation approach adopted in this thesis,
we implemented 3D channel models for the accurate characterization of the
wireless channels in these scenarios and for realistic performance evaluation.
To address the hardware cost, complexity and power consumption of the
massive MIMO architectures, we propose a novel generalized framework for
hybrid beamforming (HBF) array structures. The generalized model reveals
the opportunities that can be harnessed with the overlapped subarray structures
for a balanced trade-o_ between SE and energy efficiently (EE) of 5G
networks. The key results in this investigation show that mmWave massive
MIMO can deliver multi-Gbps rates for 5G whilst maintaining energy-efficient operation of the network.As redes LTE-A atuais não são capazes de suportar o crescimento exponencial
de tráfego que está previsto para a próxima década. De acordo
com a previsão da Ericsson, espera-se que em 2020, a nível global, 6 mil
milhões de subscritores venham a gerar mensalmente 46 exa bytes de tráfego
de dados a partir de 24 mil milhões de dispositivos ligados à rede móvel,
sendo os telefones inteligentes e dispositivos IoT de curto alcance os principais
responsáveis por tal nível de tráfego. Em resposta a esta exigência,
espera-se que as redes de 5a geração (5G) tenham um desempenho substancialmente
superior às redes de 4a geração (4G) atuais. Desencadeado pelo
UIT (União Internacional das Telecomunicações) no âmbito da iniciativa
IMT-2020, o 5G irá suportar três grandes tipos de utilizações: banda larga
móvel capaz de suportar aplicações com débitos na ordem de vários Gbps;
comunicações de baixa latência e alta fiabilidade indispensáveis em cenários
de emergência; comunicações massivas máquina-a-máquina para conectividade
generalizada. Entre as várias tecnologias capacitadoras que estão a ser
exploradas pelo 5G, as comunicações através de ondas milimétricas, os agregados
MIMO massivo e as redes celulares ultradensas (RUD) apresentam-se
como sendo as tecnologias fundamentais. Antecipa-se que o conjunto
destas tecnologias venha a fornecer às redes 5G um aumento de capacidade
de 1000x através da utilização de maiores larguras de banda, melhoria da
eficiência espectral, e elevada reutilização de frequências respetivamente.
Embora estas tecnologias possam abrir caminho para as redes sem fios
com débitos na ordem dos gigabits, existem ainda vários desafios que têm
que ser resolvidos para que seja possível aproveitar totalmente a largura de
banda disponível de maneira eficiente utilizando abordagens de formatação
de feixe e de modelação de canal adequadas. Nesta tese investigamos a
melhoria de desempenho do sistema conseguida através da utilização de
ondas milimétricas e agregados MIMO massivo em cenários de redes celulares
ultradensas de 5a geração e em cenários 'infraestrutura celular-para-qualquer
coisa' (do inglês: cellular infrastructure-to-everything) envolvendo
utilizadores pedestres e veiculares. Como um componente fundamental das
simulações de sistema utilizadas nesta tese é o canal de propagação, implementamos modelos de canal tridimensional (3D) para caracterizar de
forma precisa o canal de propagação nestes cenários e assim conseguir uma
avaliação de desempenho mais condizente com a realidade. Para resolver os
problemas associados ao custo do equipamento, complexidade e consumo
de energia das arquiteturas MIMO massivo, propomos um modelo inovador
de agregados com formatação de feixe híbrida. Este modelo genérico revela
as oportunidades que podem ser aproveitadas através da sobreposição
de sub-agregados no sentido de obter um compromisso equilibrado entre
eficiência espectral (ES) e eficiência energética (EE) nas redes 5G. Os principais
resultados desta investigação mostram que a utilização conjunta de
ondas milimétricas e de agregados MIMO massivo possibilita a obtenção, em
simultâneo, de taxas de transmissão na ordem de vários Gbps e a operação
de rede de forma energeticamente eficiente.Programa Doutoral em Telecomunicaçõe
Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks-with a focus on Propagation Models
This paper provides an overview of the features of fifth generation (5G)
wireless communication systems now being developed for use in the millimeter
wave (mmWave) frequency bands. Early results and key concepts of 5G networks
are presented, and the channel modeling efforts of many international groups
for both licensed and unlicensed applications are described here. Propagation
parameters and channel models for understanding mmWave propagation, such as
line-of-sight (LOS) probabilities, large-scale path loss, and building
penetration loss, as modeled by various standardization bodies, are compared
over the 0.5-100 GHz range
An investigation into the effects of using limited precision integer arithmetic in digital modems
The main aim of this thesis is to study the effects of using a reduced level of
arithmetical precision (as found in a 16-bit microprocessor) whilst running various
algorithms in the detection stages of a digital modem. The reason for using a lower
precision is to see if these algorithms will run on a limited precision device, such as a
Texas Instruments TMS320C25 digital signal processor, in real time. [Continues.
The characterisation and modelling of the wireless propagation channel in small cells scenarios
“A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Doctor of Philosophy”.The rapid growth in wireless data traffic in recent years has placed a great strain on the wireless spectrum and the capacity of current wireless networks. In addition, the makeup of the typical wireless propagation environment is rapidly changing as a greater percentage of data traffic moves indoors, where the coverage of radio signals is poor. This dual fronted assault on coverage and capacity has meant that the tradition cellular model is no longer sustainable, as the gains from constructing new macrocells falls short of the increasing cost. The key emerging concept that can solve the aforementioned challenges is smaller base stations such as micro-, pico- and femto-cells collectively known as small cells. However with this solution come new challenges: while small cells are efficient at improving the indoor coverage and capacity; they compound the lack of spectrum even more and cause high levels of interference. Current channel models are not suited to characterise this interference as the small cells propagation environment is vast different. The result is that overall efficiency of the networks suffers. This thesis presents an investigation into the characteristics of the wireless propagation channel in small cell environments, including measurement, analysis, modelling, validation and extraction of channel data. Two comprehensive data collection campaigns were carried out, one of them employed a RUSK channel sounder and featured dual-polarised MIMO antennas. From the first dataset an empirical path loss model, adapted to typical indoor and outdoor scenarios found in small cell environments, was constructed using regression analysis and was validated using the second dataset. The model shows good accuracy for small cell environments and can be implemented in system level simulations quickly without much requirements
- …