Extending systems-on-chip to the third dimension : performance, cost and technological tradeoffs.

Because of the today's market demand for high-performance, high-density portable hand-held applications, electronic system design technology has shifted the focus from 2-D planar SoC single-chip solutions to different alternative options as tiled silicon and single-level embedded modules as well as 3-D integration. Among the various choices, finding an optimal solution for system implementation dealt usually with cost, performance and other technological trade-off analysis at the system conceptual level. It has been identified that the decisions made within the first 20% of the total design cycle time will ultimately result up to 80% of the final product cost. In this paper, we discuss appropriate and realistic metric for performance and cost trade-off analysis both at system conceptual level (up-front in the design phase) and at implementation phase for verification in the three-dimensional integration. In order to validate the methodology, two ubiquitous electronic systems are analyzed under various implementation schemes and discuss the pros and cons of each of them

Channel Characterization for Chip-scale Wireless Communications within Computing Packages

Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses.Comment: To be presented 12th IEEE/ACM International Symposium on Networks-on-Chip (NOCS 2018); Torino, Italy; October 201

Trends in Pixel Detectors: Tracking and Imaging

For large scale applications, hybrid pixel detectors, in which sensor and read-out IC are separate entities, constitute the state of the art in pixel detector technology to date. They have been developed and start to be used as tracking detectors and also imaging devices in radiography, autoradiography, protein crystallography and in X-ray astronomy. A number of trends and possibilities for future applications in these fields with improved performance, less material, high read-out speed, large radiation tolerance, and potential off-the-shelf availability have appeared and are momentarily matured. Among them are monolithic or semi-monolithic approaches which do not require complicated hybridization but come as single sensor/IC entities. Most of these are presently still in the development phase waiting to be used as detectors in experiments. The present state in pixel detector development including hybrid and (semi-)monolithic pixel techniques and their suitability for particle detection and for imaging, is reviewed.Comment: 10 pages, 15 figures, Invited Review given at IEEE2003, Portland, Oct, 200

Early analysis of VLSI systems with packaging considerations

There is an explosive growth in the size of the VLSI (Very Large Scale Integration) systems today. Microelectronic system designers are packing millions of transistors in a single IC chip. Packaging techniques like Multi-chip module (MCM) and flip-chip bonding offer faster interconnects and IC\u27s capable of accommodating a larger number of inputs and outputs. The complexity of today\u27s designs and the availability of advanced packaging techniques call for an early analysis of the system based on estimation of system parameters to select from a wide choice of circuit partitioning, architecture alternatives and packaging options which give the best cost/performance. A procedure for the early analysis of VLSI systems under packaging considerations has been developed and implemented in this dissertation work. The early analysis tool was used to evaluate the inter-relationship between partitioning and packaging and to determine the best system design considering cost, size and delays. The functional unit level description of a 750,000-transistor MicroSparc processor was studied using an exhaustive search technique. The early analysis performed on the MicroSparc design suggested that the three chip multi-chip design using flip-chip IC\u27s interconnected on a MCM-D substrate is the most cost effective. An early bond pitch analysis performed using the tool concluded that a 250-micron bond pitch is the best choice for the multi-chip MicroSparc designs. The tool was also used to perform an early cache analysis which showed that the use of separate memory and logic processes made it feasible to design the MicroSparc design with larger cache sizes than the use of a combined logic and memory process. The designs based on the separate processes gave equivalent or better performance than the design candidates with smaller cache sizes. Future extensions of the procedure are also outlined here

Development and Packaging of Microsystems Using Foundry Services

Micro-electro-mechanical systems (MEMS) are a new and rapidly growing field of research. Several advances to the MEMS state of the art were achieved through design and characterization of novel devices. Empirical and theoretical model of polysilicon thermal actuators were developed to understand their behavior. The most extensive investigation of the Multi-User MEMS Processes (MUMPs) polysilicon resistivity was also performed. The first published value for the thermal coefficient of resistivity (TCR) of the MUMPs Poly 1 layer was determined as 1.25 x 10(exp -3)/K. The sheet resistance of the MUMPs polysilicon layers was found to be dependent on linewidth due to presence or absence of lateral phosphorus diffusion. The functional integration of MEMS with CMOS was demonstrated through the design of automated positioning and assembly systems, and a new power averaging scheme was devised. Packaging of MEMS using foundry multichip modules (MCMs) was shown to be a feasible approach to physical integration of MEMS with microelectronics. MEMS test die were packaged using Micro Module Systems MCM-D and General Electric High Density Intercounect and Chip-on-Flex MCM foundries. Xenon difluoride (XeF2) was found to be an excellent post-packaging etchant for bulk micromachined MEMS. For surface micromachining, hydrofluoric acid (HF) can be used