Gas turbulence modulation in a two-fluid model for gas-solid flows

Recent rapid progress in the theoretical and experimental study of turbulence modulation has led to greater understanding of the physics of particle-gas turbulence interactions. A new two-fluid model incorporating these advances for relatively dilute gas-solid flows containing high-inertia particles is established. The effect of aerodynamic forces upon the particulate stresses is considered in this kinetic theory-based model, and the influence of the particles on the turbulent gas is addressed: the work associated with drag forces contributes to the gas turbulent energy, and the space occupied by particles restricts the turbulent length scale. The interparticle length scale, which is usually ignored, has been incorporated into a new model for determining the turbulent length scale. This model also considers the transport effect on the turbulent length scale. Simulation results for fully developed steady flows in vertical pipes are compared with a wide range of published experimental data and, generally, good agreement is shown. This comprehensive and validated model accounts for many of the interphase interactions that have been shown to be important

Development of filtered Euler–Euler two-phase model for circulating fluidised bed: High resolution simulation, formulation and a priori analyses

Euler–Euler two-phase model simulations are usually performed with mesh sizes larger than the smallscale structure size of gas–solid flows in industrial fluidised beds because of computational resource limitation. Thus, these simulations do not fully account for the particle segregation effect at the small scale and this causes poor prediction of bed hydrodynamics. An appropriate modelling approach accounting for the influence of unresolved structures needs to be proposed for practical simulations. For this purpose, computational grids are refined to a cell size of a few particle diameters to obtain mesh-independent results requiring up to 17 million cells in a 3D periodic circulating fluidised bed. These mesh-independent results are filtered by volume averaging and used to perform a priori analyses on the filtered phase balance equations. Results show that filtered momentum equations can be used for practical simulations but must take account of a drift velocity due to the sub-grid correlation between the local fluid velocity and the local particle volume fraction, and particle sub-grid stresses due to the filtering of the non-linear convection term. This paper proposes models for sub-grid drift velocity and particle sub-grid stresses and assesses these models by a priori tests

The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications

The XDEM multi-physics and multi-scale simulation platform roots in the Ex- tended Discrete Element Method (XDEM) and is being developed at the In- stitute of Computational Engineering at the University of Luxembourg. The platform is an advanced multi- physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulation tools. For this purpose the simulation framework relies on coupling various predictive tools based on both an Eulerian and Lagrangian approach. Eulerian approaches represent the wide field of continuum models while the Lagrange approach is perfectly suited to characterise discrete phases. Thus, continuum models include classical simulation tools such as Computa- tional Fluid Dynamics (CFD) or Finite Element Analysis (FEA) while an ex- tended configuration of the classical Discrete Element Method (DEM) addresses the discrete e.g. particulate phase. Apart from predicting the trajectories of individual particles, XDEM extends the application to estimating the thermo- dynamic state of each particle by advanced and optimised algorithms. The thermodynamic state may include temperature and species distributions due to chemical reaction and external heat sources. Hence, coupling these extended features with either CFD or FEA opens up a wide range of applications as diverse as pharmaceutical industry e.g. drug production, agriculture food and processing industry, mining, construction and agricultural machinery, metals manufacturing, energy production and systems biology

Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN)

Sistem Latihan Dual Nasional (SLDN) merupakan satu sistem latihan dan usahasama antara sektor awam dan sektor swasta dilaksanakan untuk melahirkan tenaga mahir k-worker selari dengan keperluan industri masa kini untuk membangunkan ekonomi negara. Pihak kerajaan dan syarikat swasta menaja pekerja pilihan mereka sebagai pelatih dalam sistem latihan ini bagi mempertingkatkan kebolehan pekerja mereka. Selain itu, pelatih juga terdiri daripada pelajar yang tidak dapat melanjutkan pelajaran ke mana-mana institusi pengajian tinggi awam mahupun swasta. Sistem ini menjalankan pendekatan day release iaitu pelatih menjalani latihan selama empat hari di industri dan satu hari di institusi latihan atau block release iaitu pelatih menjalani latihan kemahiran di industri empat bulan dan satu bulan di institusi latihan mengikut kesesuaian industri tersebut. Kajian berbentuk deskriptif dijalankan untuk melihat melihat tahap kompetensi pembimbing SLDN. Selain itu juga, kajian ini dijalankan bagi melihat perbezaan terhadap tahap pengetahuan, kemahiran dan sikap pembimbing SLDN berdasarkan jantina. Kajian ini juga dibuat bagi menentukan hubungan kompetensi pembimbing berdasarkan pengalaman bekerja. Penyelidikan tinjauan deskriptif ini menggunakan borang soal selidik sebagai instrumen kajian berskala Likert. Seramai 84 orang responden yang terdiri daripada pembimbing syarikat bertauliah SLDN terlibat di dalam kajian ini. Data dianalisis menggunakan SPSS versi 16.0. Hasil analisis mendapati pembimbing mempunyai pengetahuan yang tinggi di samping kemahiran dan sikap. Keputusan inferensi pula menunjukkan tidak terdapat perbezaan antara tahap pengetahuan, kemahiran dan sikap pembimbing berdasarkan jantina manakala analisis korelasi Pearson menunjukkan tidak terdapat hubungan antara kompetensi pembimbing berdasarkan pengalaman bekerja

Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN)

Sistem Latihan Dual Nasional (SLDN) merupakan satu sistem latihan dan usahasama antara sektor awam dan sektor swasta dilaksanakan untuk melahirkan tenaga mahir k-worker selari dengan keperluan industri masa kini untuk membangunkan ekonomi negara. Pihak kerajaan dan syarikat swasta menaja pekerja pilihan mereka sebagai pelatih dalam sistem latihan ini bagi mempertingkatkan kebolehan pekerja mereka. Selain itu, pelatih juga terdiri daripada pelajar yang tidak dapat melanjutkan pelajaran ke mana-mana institusi pengajian tinggi awam mahupun swasta. Sistem ini menjalankan pendekatan day release iaitu pelatih menjalani latihan selama empat hari di industri dan satu hari di institusi latihan atau block release iaitu pelatih menjalani latihan kemahiran di industri empat bulan dan satu bulan di institusi latihan mengikut kesesuaian industri tersebut. Kajian berbentuk deskriptif dijalankan untuk melihat melihat tahap kompetensi pembimbing SLDN. Selain itu juga, kajian ini dijalankan bagi melihat perbezaan terhadap tahap pengetahuan, kemahiran dan sikap pembimbing SLDN berdasarkan jantina. Kajian ini juga dibuat bagi menentukan hubungan kompetensi pembimbing berdasarkan pengalaman bekerja. Penyelidikan tinjauan deskriptif ini menggunakan borang soal selidik sebagai instrumen kajian berskala Likert. Seramai 84 orang responden yang terdiri daripada pembimbing syarikat bertauliah SLDN terlibat di dalam kajian ini. Data dianalisis menggunakan SPSS versi 16.0. Hasil analisis mendapati pembimbing mempunyai pengetahuan yang tinggi di samping kemahiran dan sikap. Keputusan inferensi pula menunjukkan tidak terdapat perbezaan antara tahap pengetahuan, kemahiran dan sikap pembimbing berdasarkan jantina manakala analisis korelasi Pearson menunjukkan tidak terdapat hubungan antara kompetensi pembimbing berdasarkan pengalaman bekerja

Continuum modelling of granular particle flow with inelastic inter-particle collisions

The kinetic theory of granular flow is a successful model for gas-solid flows. However, inelastic collisions between particles, among other mechanisms, cause agglomeration of particles, which may be the reason why undue sensitivity of the model to any slight inelasticity in inter-particle collisions has been seen previously. In contrast to a dry (i.e. no interstitial gas) granular system, this tendency to agglomerate in a gas driven two-phase system may be countered by the carrier gas turbulence. In this paper, a heuristic model for particle gas turbulence interaction is introduced within the scope of a generalized kinetic theory model which incorporates the carrier fluid effect on particulate stresses. The numerical results for the flow of granular particles in vertical pipes, which considers slightly inelastic inter-particle collisions, are in reasonably good agreement with published experimental data. Even in this relatively simple model, the results indicate that the interactions between the particle phase and gas turbulence need to be appropriately addressed in any kinetic theory based model for gas solid flows

Towards a continuum model for particle-induced velocity fluctuations in suspension flow through a stenosed geometry

Non-particulate continuum descriptions allow for computationally efficient modeling of suspension flows at scales that are inaccessible to more detailed particulate approaches. It is well known that the presence of particles influences the effective viscosity of a suspension and that this effect has thus to be accounted for in macroscopic continuum models. The present paper aims at developing a non-particulate model that reproduces not only the rheology but also the cell-induced velocity fluctuations, responsible for enhanced diffusivity. The results are obtained from a coarse-grained blood model based on the lattice Boltzmann method. The benchmark system comprises a flow between two parallel plates with one of them featuring a smooth obstacle imitating a stenosis. Appropriate boundary conditions are developed for the particulate model to generate equilibrated cell configurations mimicking an infinite channel in front of the stenosis. The averaged flow field in the bulk of the channel can be described well by a non-particulate simulation with a matched viscosity. We show that our proposed phenomenological model is capable to reproduce many features of the velocity fluctuations.Comment: 6 pages, 6 figure