A Discrimination Method for Landmines and Metal Fragments Using Metal Detectors

While discrimination methods for distinguishing between real mines and metal fragments would greatly increase the efficiency of demining operations, no practical solution has been implemented yet. A potentially efficient method for the discrimination of metallic targets using metal detectors uses a high-precision robotic manipulator to scan the minefield. Further field research is needed, however, before this method can deploy for operational use

Near-Surface Interface Detection for Coal Mining Applications Using Bispectral Features and GPR

The use of ground penetrating radar (GPR) for detecting the presence of near-surface interfaces is a scenario of special interest to the underground coal mining industry. The problem is difficult to solve in practice because the radar echo from the near-surface interface is often dominated by unwanted components such as antenna crosstalk and ringing, ground-bounce effects, clutter, and severe attenuation. These nuisance components are also highly sensitive to subtle variations in ground conditions, rendering the application of standard signal pre-processing techniques such as background subtraction largely ineffective in the unsupervised case. As a solution to this detection problem, we develop a novel pattern recognition-based algorithm which utilizes a neural network to classify features derived from the bispectrum of 1D early time radar data. The binary classifier is used to decide between two key cases, namely whether an interface is within, for example, 5 cm of the surface or not. This go/no-go detection capability is highly valuable for underground coal mining operations, such as longwall mining, where the need to leave a remnant coal section is essential for geological stability. The classifier was trained and tested using real GPR data with ground truth measurements. The real data was acquired from a testbed with coal-clay, coal-shale and shale-clay interfaces, which represents a test mine site. We show that, unlike traditional second order correlation based methods such as matched filtering which can fail even in known conditions, the new method reliably allows the detection of interfaces using GPR to be applied in the near-surface region. In this work, we are not addressing the problem of depth estimation, rather confining ourselves to detecting an interface within a particular depth range

A comparative and combined study of EMIS and GPR detectors by the use of Independent Component Analysis

Independent Component Analysis (ICA) is applied to classify unexploded ordnance (UXO) on laboratory UXO test-field data, acquired by stand-off detection. The data are acquired by an Electromagnetic Induction Spectroscopy (EMIS) metal detector and a ground penetrating radar (GPR) detector. The metal detector is a GEM-3, which is a monostatic sensor measuring the response of the environment on a multi-frequency constant wave excitation field (300 Hz to 25 kHz), and the GPR detector is a stepped-frequency GPR with a monostatic bow-tie antenna (500MHz to 2.5GHz). For both sensors the in-phase and the quadrature responses are measured at each frequency. The test field is a box of soil where a wide range of UXOs are placed at selected positions. The position and movement of both of the detectors are controlled by a 2D-scanner. Thus the data are acquired at well-defined measurement points. The data are processed by the use of statistical signal processing based on ICA. An unsupervised method based on ICA to detect, discriminate, and classify the UXOs from clutter is suggested. The approach is studied on GPR and EMIS data, separately and compared. The potential is an improved ability: to detect the UXOs, to evaluate the related characteristics, and to reduce the number of false alarms from harmless objects and clutter

Context-dependent fusion with application to landmine detection.

Traditional machine learning and pattern recognition systems use a feature descriptor to describe the sensor data and a particular classifier (also called expert or learner ) to determine the true class of a given pattern. However, for complex detection and classification problems, involving data with large intra-class variations and noisy inputs, no single source of information can provide a satisfactory solution. As a result, combination of multiple classifiers is playing an increasing role in solving these complex pattern recognition problems, and has proven to be viable alternative to using a single classifier. In this thesis we introduce a new Context-Dependent Fusion (CDF) approach, We use this method to fuse multiple algorithms which use different types of features and different classification methods on multiple sensor data. The proposed approach is motivated by the observation that there is no single algorithm that can consistently outperform all other algorithms. In fact, the relative performance of different algorithms can vary significantly depending on several factions such as extracted features, and characteristics of the target class. The CDF method is a local approach that adapts the fusion method to different regions of the feature space. The goal is to take advantages of the strengths of few algorithms in different regions of the feature space without being affected by the weaknesses of the other algorithms and also avoiding the loss of potentially valuable information provided by few weak classifiers by considering their output as well. The proposed fusion has three main interacting components. The first component, called Context Extraction, partitions the composite feature space into groups of similar signatures, or contexts. Then, the second component assigns an aggregation weight to each detector\u27s decision in each context based on its relative performance within the context. The third component combines the multiple decisions, using the learned weights, to make a final decision. For Context Extraction component, a novel algorithm that performs clustering and feature discrimination is used to cluster the composite feature space and identify the relevant features for each cluster. For the fusion component, six different methods were proposed and investigated. The proposed approached were applied to the problem of landmine detection. Detection and removal of landmines is a serious problem affecting civilians and soldiers worldwide. Several detection algorithms on landmine have been proposed. Extensive testing of these methods has shown that the relative performance of different detectors can vary significantly depending on the mine type, geographical site, soil and weather conditions, and burial depth, etc. Therefore, multi-algorithm, and multi-sensor fusion is a critical component in land mine detection. Results on large and diverse real data collections show that the proposed method can identify meaningful and coherent clusters and that different expert algorithms can be identified for the different contexts. Our experiments have also indicated that the context-dependent fusion outperforms all individual detectors and several global fusion methods

The Journal of ERW and Mine Action Issue 18.1 (2014)

Focus on land release issues Feature: Best Practices of Residual Clearance Special Report: Declining Donor Funding and Strategies to Attract New Donor

The Journal of ERW and Mine Action Issue 18.1 (2014)

Focus on land release issues Feature: Best Practices of Residual Clearance Special Report: Declining Donor Funding and Strategies to Attract New Donor

Issue 18.1 Endnotes

Issue 18.1 Endnote

A Multidisciplinary Analysis of Frequency Domain Metal Detectors for Humanitarian Demining

This thesis details an analysis of metal detectors (low frequency electromagnetic induction devices) with emphasis on Frequency Domain (FD) systems and the operational conditions of interest to humanitarian demining. After an initial look at humanitarian demining and a review of their basic principles we turn our attention to electromagnetic induction modelling and to analytical solutions to some basic FD direct (forward) problems. The second half of the thesis focuses then on the analysis of an extensive amount of experimental data. The possibility of target classification is first discussed on a qualitative basis, then quantitatively. Finally, we discuss shape and size determination via near field imaging

DETERMINE: Novel Radar Techniques for Humanitarian Demining

Today the plague of landmines represent one of the greatest curses of modern time, killing and maiming innocent people every day. It is not easy to provide a global estimate of the problem dimension, however, reported casualties describe that the majority of the victims are civilians, with almost a half represented by children. Among all the technologies that are currently employed for landmine clearance, Ground Penetrating Radar (GPR) is one of those expected to increase the efficiency of operation, even if its high-resolution imaging capability and the possibility of detecting also non-metallic landmines are unfortunately balanced by the high sensor false alarm rate. Most landmines may be considered as multiple layered dielectric cylinders that interact with each other to produce multiple reflections, which will be not the case for other common clutter objects. Considering that each scattering component has its own angular radiation pattern, the research has evaluated the improvements that multistatic configurations could bring to the collected information content. Employing representative landmine models, a number of experimental campaigns have confirmed that GPR is capable of detecting the internal reflections and that the presence of such scattering components could be highlighted changing the antennas offset. In particular, results show that the information that can be extracted relevantly changes with the antenna separation, demonstrating that this approach can provide better confidence in the discrimination and recognition process. The proposed bistatic approach aims at exploiting possible presence of internal structure beneath the target, which for landmines means the activation or detonation assemblies and possible internal material diversity, maintaining a limited acquisition effort. Such bistatic configurations are then included in a conceptual design of a highly flexible GPR system capable of searching for landmines across a large variety of terrains, at reasonably low cost and targeting operators safety

The SIMCA algorithm for processing ground penetrating radar data and its practical applications

The main objective of this thesis is to present a new image processing technique to improve the detectability of buried objects such as landmines using Ground Penetrating Radar (GPR). The main challenge of GPR based landmine detection is to have an accurate image analysis method that is capable of reducing false alarms. However an accurate image relies on having sufficient spatial resolution in the received signal. An Antipersonnel mine (APM) can have a diameter as little as 2cm, whereas many soils have very high attenuation at frequencies above 450 MHz. In order to solve the detection problem, a system level analysis of the issues involved with the recognition of landmines using image reconstruction is required. The thesis illustrates the development of a novel technique called the SIMCA (“SIMulated Correlation Algorithm”) based on area or volume correlation between the trace that would be returned by an ideal point reflector in the soil conditions at the site (obtained using the realistic simulation of Maxwell’s equations) and the actual trace. During an initialization phase, SIMCA carries out radar simulation using the system parameters of the radar and the soil properties. Then SIMCA takes the raw data as the radar is scanned over the ground and uses a clutter removal technique to remove various unwanted signals of clutter such as cross talk, initial ground reflection and antenna ringing. The trace which would be returned by a target under these conditions is then used to form a correlation kernel using a GPR simulator. The 2D GPR scan (B scan), formed by abutting successive time-amplitude plots taken from different spatial positions as column vectors,is then correlated with the kernel using the Pearson correlation coefficient resulting in a correlated image which is brightest at points most similar to the canonical target. This image is then raised to an odd power >2 to enhance the target/background separation. The first part of the thesis presents a 2-dimensional technique using the B scans which have been produced as a result of correlating the clutter removed radargram (’B scan’) with the kernel produced from the simulation. In order to validate the SIMCA 2D algorithm, qualitative evidence was used where comparison was made between the B scans produced by the SIMCA algorithm with B scans from some other techniques which are the best alternative systems reported in the open literature. It was found from this that the SIMCA algorithm clearly produces clearer B scans in comparison to the other techniques. Next quantitative evidence was used to validate the SIMCA algorithm and demonstrate that it produced clear images. Two methods are used to obtain this quantitative evidence. In the first method an expert GPR user and 4 other general users are used to predict the location of landmines from the correlated B scans and validate the SIMCA 2D algorithm. Here human users are asked to indicate the location of targets from a printed sheet of paper which shows the correlated B scans produced by the SIMCA algorithm after some training, bearing in mind that it is a blind test. For the second quantitative evidence method, the AMIRA software is used to obtain values of the burial depth and position of the target in the x direction and hence validate the SIMCA 2D algorithm. Then the absolute error values for the burial depth along with the absolute error values for the position in the x direction obtained from the SIMCA algorithm and the Scheers et al’s algorithm when compared to the corresponding ground truth values were calculated. Two-dimensional techniques that use B scans do not give accurate information on the shape and dimensions of the buried target, in comparison to 3D techniques that use 3D data (’C scans’). As a result the next part of the thesis presents a 3-dimensional technique. The equivalent 3D kernel is formed by rotating the 2D kernel produced by the simulation along the polar co-ordinates, whilst the 3D data is the clutter removed C scan. Then volume correlation is performed between the intersecting parts of the kernel and the data. This data is used to create iso-surfaces of the slices raised to an odd power > 2. To validate the algorithm an objective validation process which compares the actual target volume to that produced by the re-construction process is used. The SIMCA 3D technique and the Scheers et al’s (the best alternative system reported in the open literature) technique are used to image a variety of landmines using GPR scans. The types of mines included plastic, wooden and glass ones. In all cases clear images were obtained with SIMCA. In contrast Scheers’ algorithm, the present state-of-the-art, failed to provide clear images of non metallic landmines. For this thesis, the above algorithms have been tested for landmine data and for locating foundations in demolished buildings and to validate and demonstrate that the SIMCA algorithms are better than existing technologies such as the Scheers et al’s method and the REFLEXW commercial software