Performance Analysis of IPv6 Transition Mechanisms over MPLS

 Exhaustion of current version of Internet Protocol version 4 (IPv4) addresses initiated development of next-generation Internet Protocol version 6 (IPv6). IPv6 is acknowledged to provide more address space, better address design, and greater security; however, IPv6 and IPv4 are not fully compatible. For the two protocols to coexist, various IPv6 transition mechanisms have been developed. This research will analyze a series of IPv6 transition mechanisms over the Multiprotocol Label Switching (MPLS) backbone using a simulation tool (OPNET) and will evaluate and compare their performances. The analysis will include comparing the end-to-end delay, jitter, and throughput performance metrics using tunneling mechanisms, specifically Manual Tunnel, Generic Routing Encapsulation (GRE) Tunnel, Automatic IPv4-Compatible Tunnel, and 6to4 Tunnel between Customer Edge (CE)-to-CE routers and between Provider Edge (PE)-to-PE routers. The results are then compared against 6PE, Native IPv6, and Dual Stack, all using the MPLS backbone. The traffic generated for this comparison are database access, email, File Transfer, File Print, Telnet, Video Conferencing over IP, Voice over IP, Web Browsing, and Remote Login. A statistical analysis is performed to compare the performance metrics of these mechanisms to evaluate any statistically-significant differences among them. The main objective of this research is to rank the aforementioned IPv6 transition mechanism and identify the superior mechanism(s) that offer lowest delay, lowest jitter, and highest throughput

Quality of Service over Specific Link Layers: state of the art report

The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service

Performance evaluation of MPLS-enabled communications infrastructure for wide area monitoring systems

In order to obtain the transient power system measurement information, Wide Area Monitoring Systems (WAMS) should be able to collect Phasor Measurement Unit (PMU) data in a timely manner. Therefore along with the continual deployment of PMUs in Great Britain (GB) transmission system substations, a high performance communications infrastructure is becoming essential with regard to the establishment of reliable WAMS. This paper focuses mainly on evaluating the performance of the real-time WAMS communication infrastructure when Multi-Protocol Label Switching (MPLS) capability is added to a conventional IP network. Furthermore, PMU communications from geographically distributed substations to a Phasor Data Concentrator (PDC) are investigated over different transport protocols. Using OPNET Modeler, simulations are performed based on the existing WAMS infrastructure as installed on the GB transmission system. The simulation results are analyzed in detail in order to fully determine the different characteristics of communication delays between PMUs and PDC

The Design and Implementation of a PCIe-based LESS Label Switch

With the explosion of the Internet of Things, the number of smart, embedded devices has grown exponentially in the last decade, with growth projected at a commiserate rate. These devices create strain on the existing infrastructure of the Internet, creating challenges with scalability of routing tables and reliability of packet delivery. Various schemes based on Location-Based Forwarding and ID-based routing have been proposed to solve the aforementioned problems, but thus far, no solution has completely been achieved. This thesis seeks to improve current proposed LORIF routers by designing, implementing, and testing and a PCIe-based LESS switch to process unrouteable packets under the current LESS forwarding engine

Low Cost Quality of Service Multicast Routing in High Speed Networks

Many of the services envisaged for high speed networks, such as B-ISDN/ATM, will support real-time applications with large numbers of users. Examples of these types of application range from those used by closed groups, such as private video meetings or conferences, where all participants must be known to the sender, to applications used by open groups, such as video lectures, where partcipants need not be known by the sender. These types of application will require high volumes of network resources in addition to the real-time delay constraints on data delivery. For these reasons, several multicast routing heuristics have been proposed to support both interactive and distribution multimedia services, in high speed networks. The objective of such heuristics is to minimise the multicast tree cost while maintaining a real-time bound on delay. Previous evaluation work has compared the relative average performance of some of these heuristics and concludes that they are generally efficient, although some perform better for small multicast groups and others perform better for larger groups. Firstly, we present a detailed analysis and evaluation of some of these heuristics which illustrates that in some situations their average performance is reversed; a heuristic that in general produces efficient solutions for small multicasts may sometimes produce a more efficient solution for a particular large multicast, in a specific network. Also, in a limited number of cases using Dijkstra's algorithm produces the best result. We conclude that the efficiency of a heuristic solution depends on the topology of both the network and the multicast, and that it is difficult to predict. Because of this unpredictability we propose the integration of two heuristics with Dijkstra's shortest path tree algorithm to produce a hybrid that consistently generates efficient multicast solutions for all possible multicast groups in any network. These heuristics are based on Dijkstra's algorithm which maintains acceptable time complexity for the hybrid, and they rarely produce inefficient solutions for the same network/multicast. The resulting performance attained is generally good and in the rare worst cases is that of the shortest path tree. The performance of our hybrid is supported by our evaluation results. Secondly, we examine the stability of multicast trees where multicast group membership is dynamic. We conclude that, in general, the more efficient the solution of a heuristic is, the less stable the multicast tree will be as multicast group membership changes. For this reason, while the hybrid solution we propose might be suitable for use with closed user group multicasts, which are likely to be stable, we need a different approach for open user group multicasting, where group membership may be highly volatile. We propose an extension to an existing heuristic that ensures multicast tree stability where multicast group membership is dynamic. Although this extension decreases the efficiency of the heuristics solutions, its performance is significantly better than that of the worst case, a shortest path tree. Finally, we consider how we might apply the hybrid and the extended heuristic in current and future multicast routing protocols for the Internet and for ATM Networks.

Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Quality of service assurance for the next generation Internet

The provisioning for multimedia applications has been of increasing interest among researchers and Internet Service Providers. Through the migration from resource-based to service-driven networks, it has become evident that the Internet model should be enhanced to provide support for a variety of differentiated services that match applications and customer requirements, and not stay limited under the flat best-effort service that is currently provided. In this paper, we describe and critically appraise the major achievements of the efforts to introduce Quality of Service (QoS) assurance and provisioning within the Internet model. We then propose a research path for the creation of a network services management architecture, through which we can move towards a QoS-enabled network environment, offering support for a variety of different services, based on traffic characteristics and user expectations

Spare capacity modelling and its applications in survivable iP-over-optical networks

As the interest in IP-over-optical networks are becoming the preferred core network architecture, survivability has emerged as a major concern for network service providers; a result of the potentially huge traffic volumes that will be supported by optical infrastructure. Therefore, implementing recovery strategies is critical. In addition to the traditional recovery schemes based around protection and restoration mechanisms, pre-allocated restoration represents a potential candidate to effect and maintain network resilience under failure conditions. Preallocated restoration technique is particularly interesting because it provides a trade-off in terms of recovery performance and resources between protection and restoration schemes. In this paper, the pre-allocated restoration performance is investigated under single and dual-link failures considering a distributed GMPLSbased IP/WDM mesh network. Two load-based spare capacity optimisation methods are proposed in this paper; Local Spare Capacity Optimisation (LSCO) and Global Spare Capacity Optimisation (GSCO)