Minimum-Information LQG Control - Part I: Memoryless Controllers

With the increased demand for power efficiency in feedback-control systems, communication is becoming a limiting factor, raising the need to trade off the external cost that they incur with the capacity of the controller's communication channels. With a proper design of the channels, this translates into a sequential rate-distortion problem, where we minimize the rate of information required for the controller's operation under a constraint on its external cost. Memoryless controllers are of particular interest both for the simplicity and frugality of their implementation and as a basis for studying more complex controllers. In this paper we present the optimality principle for memoryless linear controllers that utilize minimal information rates to achieve a guaranteed external-cost level. We also study the interesting and useful phenomenology of the optimal controller, such as the principled reduction of its order

Optimal Sequence-Based Control of Networked Linear Systems

In Networked Control Systems (NCS), components of a control loop are connected by data networks that may introduce time-varying delays and packet losses into the system, which can severly degrade control performance. Hence, this book presents the newly developed S-LQG (Sequence-Based Linear Quadratic Gaussian) controller that combines the sequence-based control method with the well-known LQG approach to stochastic optimal control in order to compensate for the network-induced effects

Optimal Sequence-Based Control of Networked Linear Systems

In Networked Control Systems (NCS), components of a control loop are connected by data networks that may introduce time-varying delays and packet losses into the system, which can severly degrade control performance. Hence, this book presents the newly developed S-LQG (Sequence-Based Linear Quadratic Gaussian) controller that combines the sequence-based control method with the well-known LQG approach to stochastic optimal control in order to compensate for the network-induced effects

Development and evaluation of methods for control and modelling of multiple-input multiple-output systems

In control, a common type of system is the multiple-input multiple-output (MIMO) system, where the same input may affect multiple outputs, or conversely, the same output is affected by multiple inputs. In this thesis two methods for controlling MIMO systems are examined, namely linear quadratic Gaussian (LQG) control and decentralized control, and some of the difficulties associated with them.One difficulty when implementing decentralized control is to decide which inputs should control which outputs, also called the input-output pairing problem. There are multiple ways to solve this problem, among them using gramian based measures, which include the Hankel interaction index array, the participation matrix and the Σ2 method.\ua0 These methods take into account system dynamics as opposed to many other methods which only consider the steady-state system. However, the gramian based methods have issues with input and output scaling. Generally, this is handled by scaling all inputs and outputs to have equal range. However, in this thesis it is demonstrated how this can cause an incorrect pairing. Furthermore, this thesis examines other methods of scaling the gramian based measures, using either row or column sums, or by utilizing the Sinkhorn-Knopp algorithm. It is shown that there are considerable benefits to be gained from the alternative scaling of the gramian based measures, especially when using the Sinkhorn-Knopp algorithm. The use of this method also has the advantage that the results are completely independent of the original scaling of the inputs and outputs.An expansion to the decentralized control structure is the sparse control, in which a decentralized controller is expanded to include feed-forward or MIMO blocks. In this thesis we explore how to best use the gramian based measures to find sparse control structures, and propose a method which demonstrates considerable improvement compared to existing methods of sparse control structure design.A prerequisite to implementing control configuration methods is an understanding of the processes in question. In this thesis we examine the pulp refining process and design both static and dynamic models for pulp and paper properties such as shives width, fiber length and tensile index, and various available inputs. We demonstrate that utilizing internal variables (primarily consistencies) estimated from temperature measurements yields improved results compared to using solely measured variables. The measurement data from the refiners is noisy, sometimes sparse and generally irregularly sampled. This thesis discusses the challenges posed by these constraints and how they can be resolved.\ua0\ua0 An alternative way to control a MIMO system is to implement an LQG controller, which yields a single control structure for the entire system using a state based controller. It has been proposed that LQG control can be an effective control scheme to be used on networked control systems with wireless channels. These channels have a tendency to be unreliable with packet delays and packet losses. This thesis examines how to implement an LQG controller over such unreliable communication channels, and derives the optimal controller minimizing the cost function expressed in actuated controls.When new methods of control system design and analysis are introduced in the control engineering field, it is important to compare the new results with existing methods. Often this requires application of the methods on examples, and for this purpose benchmark processes are introduced. However, in many areas of control engineering research the number of examples are relatively few, in particular when MIMO systems are considered. For a thorough assessment of a method, however, as large number of relevant models as possible should be used. As a remedy, a framework has been developed for generating linear MIMO models based on predefined system properties, such as model type, size, stability, time constants, delays etc. This MIMO generator, which is presented in this thesis, is demonstrated by using it to evaluate the previously described scaling methods for the gramian based pairing methods

Performance analysis with network-enhanced complexities: On fading measurements, event-triggered mechanisms, and cyber attacks

Copyright © 2014 Derui Ding et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Nowadays, the real-world systems are usually subject to various complexities such as parameter uncertainties, time-delays, and nonlinear disturbances. For networked systems, especially large-scale systems such as multiagent systems and systems over sensor networks, the complexities are inevitably enhanced in terms of their degrees or intensities because of the usage of the communication networks. Therefore, it would be interesting to (1) examine how this kind of network-enhanced complexities affects the control or filtering performance; and (2) develop some suitable approaches for controller/filter design problems. In this paper, we aim to survey some recent advances on the performance analysis and synthesis with three sorts of fashionable network-enhanced complexities, namely, fading measurements, event-triggered mechanisms, and attack behaviors of adversaries. First, these three kinds of complexities are introduced in detail according to their engineering backgrounds, dynamical characteristic, and modelling techniques. Then, the developments of the performance analysis and synthesis issues for various networked systems are systematically reviewed. Furthermore, some challenges are illustrated by using a thorough literature review and some possible future research directions are highlighted.This work was supported in part by the National Natural Science Foundation of China under Grants 61134009, 61329301, 61203139, 61374127, and 61374010, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany