Time dynamic channel model for broadband fixed wireless access systems

Abstract Broadband fixed wireless access (BFWA) systems have been recognized as an effective first kilometer solution for broadband services to residential and business customers. The large bandwidth available in frequency bands above 20 GHz makes radio systems with very high capacities possible. Users can be offered bit rates in the order of several hundred Mbit/s, making (in terms of capacity) such radio links an alternative to optical fibre in many cases. High capacities BFWA links can be used to serve individual users directly or function as a backbone for lower capacity systems (both wire line and wireless) for local distribution of data. In addition, wireless always offers the freedom of broadband being away from the fixed access point. At mm-wavelengths the signals are sensitive to time dynamic propagation degradation caused by precipitation, vegetation and reflections/multipath from e.g. building surfaces. BFWA need to cope with location and time dependent interference and employ techniques such as interference cancellation and adaptive modulation and coding to optimise throughput during varying traffic load conditions. Multiple input multiple output (MIMO) and space-time coding, as well as adaptive (smart) antennas require knowledge of the channel dynamics as well. The objective of this master thesis is to develop a realistic time dynamic channel model for BFWA operating above 20 GHz utilising adaptive physical layer techniques. The channel model developed represents the time varying wideband channel impulse response including degradations due to multipath propagation, rain attenuation and vegetation fading. The channel model is suitable for simulating mitigation techniques for interference between base stations as well as adaptive modulation and coding techniques. The Maseng-Bakken statistical dynamic model of rain attenuation was adapted to model the rain attenuation. The dynamic vegetation effect was modelled as Nakagami-Rice distribution with K-factor depending on wind speed. A generic tapped delay line model was developed, in which the number of taps depend on maximum tap delay. This thesis is based on work in the project BROADWAN (www.broadwan.org), partly funded under the Information Society Technologies (IST) priority of the European Commission Sixth Framework Program.

Propagation studies at 5.8 GHZ within vegetated environment for point-to-multipoint applications

This thesis presents an empirical study for fixed wireless links based on IEEE802.16 standard in vegetated residential environment. Simulation and field measurements were conducted for suburban microcell channel by utilising 5.8 GHz of Unlicensed National Information Infrastructure (UNII). A set of comprehensive measurement that covered 13 point-to-multipoint links surrounding Universiti Teknologi Malaysia were selected to investigate the impact of vegetation on propagating radio waves. The aim of this study is to develop a path loss model that incorporates vegetation effect. Received Signal Strength (RSS), Signal-to-Noise Ratio (SNR) and factors influencing performance of the signal strength are highlighted here. Performance of RSS during daytime and night is also evaluated. The accuracy of proposed prediction model is analysed which quantifies that path loss is proportional to the distance of tree to the receiver, size, density and number of trees within the vicinity of transmitting and receiving antennas. Observation found that terrain and external effect, such as wind will significantly affect the signal performance too. Depending on the dynamic characteristics of trees presence between the communication links, the measurement results show that the path loss is increased from 5.69 dB to 33.67 dB. The results obtained are compared to Free Space Loss model, Weissberger model, and ITU-R model. Those established models are used to validate the applicability result obtained by means of Root Mean Square Error (RMSE). In view of this research work, a good agreement of the proposed excess loss model achieves the smallest RMSE for links obstructed by a single tree, row of trees, row of trees and road as well as row of trees, road and building

Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks

MmWave communications are expected to play a major role in the Fifth generation of mobile networks. They offer a potential multi-gigabit throughput and an ultra-low radio latency, but at the same time suffer from high isotropic pathloss, and a coverage area much smaller than the one of LTE macrocells. In order to address these issues, highly directional beamforming and a very high-density deployment of mmWave base stations were proposed. This Thesis aims to improve the reliability and performance of the 5G network by studying its tight and seamless integration with the current LTE cellular network. In particular, the LTE base stations can provide a coverage layer for 5G mobile terminals, because they operate on microWave frequencies, which are less sensitive to blockage and have a lower pathloss. This document is a copy of the Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight integration architecture, based on mobile terminals' dual connectivity to LTE and 5G radio access networks, and will evaluate which are the new network procedures that will be needed to support it. Moreover, this new architecture will be implemented in the ns-3 simulator, and a thorough simulation campaign will be conducted in order to evaluate its performance, with respect to the baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz

Signal distortion caused by tree foliage in a 2.5 GHz channel

A fixed terrestrial wireless system such as the Microwave Multi-channel Distribution Service (MMDS) can be used as the 'last mile' to provide a high speed Internet connection from a base station to a home in a rural or suburban residential area. Such a broadband wireless system works very well under line-of-sight transmission. It works quite well even if the line-of-sight is obstructed with a large number of trees. However, when trees obstruct the line-of-sight, under conditions of wind, the user may experience loss of the RF signal from time to time. This is especially true under gusty conditions. As part of this research a high precision DSP-based measuring system is devised to accurately measure and characterize the distortions caused by tree foliage on the RF line-of-sight signal. The approach is to digitally generate a signal composed of several tones, up-convert the signal to 2.5 GHz and send it through tree foliage to a receiver where the signal is down-converted and sampled for a duration of five seconds. The samples collected are processed using Matlab to compute the temporal amplitude and phase variations of the tones. The measurement system provides estimates of the amplitude and phase of the receive tones with a time resolution of 3.2 ms. The standard deviation of the amplitude estimates is 0.3% of the actual amplitude of the tones and the standard deviation of the phase estimates is 0.23 degree. This accuracy is obtained when the signal-to-noise ratio of the receive signal is greater than 20 dB. Measurement in the field with tree foliage in the line-of-sight shows that the swaying of the branches in the wind can cause rapid signal fading. This research determines the type of fade, the depth and duration of the fade, as well as the fading rate

Contributions to channel modelling and performance estimation of HAPS-based communication systems regarding IEEE Std 802.16TM

New and future telecommunication networks are and will be broadband type. The existing terrestrial and space radio communication infrastructures might be supplemented by new wireless networks that make and will make use of aeronautics-technology. Our study/contribution is referring to radio communications based on radio stations aboard a stratospheric platform named, by ITU-R, HAPS (High Altitude Platform Station). These new networks have been proposed as an alternative technology within the ITU framework to provide various narrow/broadband communication services. With the possibility of having a payload for Telecommunications in an aircraft or a balloon (HAPS), it can be carried out radio communications to provide backbone connections on ground and to access to broadband points for ground terminals. The latest implies a complex radio network planning. Therefore, the radio coverage analysis at outdoors and indoors becomes an important issue on the design of new radio systems. In this doctoral thesis, the contribution is related to the HAPS application for terrestrial fixed broadband communications. HAPS was hypothesised as a quasi-static platform with height above ground at the so-called stratospheric layer. Latter contribution was fulfilled by approaching via simulations the outdoor-indoor coverage with a simple efficient computational model at downlink mode. This work was assessing the ITU-R recommendations at bands recognised for the HAPS-based networks. It was contemplated the possibility of operating around 2 GHz (1820 MHz, specifically) because this band is recognised as an alternative for HAPS networks that can provide IMT-2000 and IMT-Advanced services. The global broadband radio communication model was composed of three parts: transmitter, channel, and receiver. The transmitter and receiver parts were based on the specifications of the IEEE Std 802.16TM-2009 (with its respective digital transmission techniques for a robust-reliable link), and the channel was subjected to the analysis of radio modelling at the level of HAPS and terrestrial (outdoors plus indoors) parts. For the channel modelling was used the two-state characterisation (physical situations associated with the transmitted/received signals), the state-oriented channel modelling. One of the channel-state contemplated the environmental transmission situation defined by a direct path between transmitter and receiver, and the remaining one regarded the conditions of shadowing. These states were dependent on the elevation angle related to the ray-tracing analysis: within the propagation environment, it was considered that a representative portion of the total energy of the signal was received by a direct or diffracted wave, and the remaining power signal was coming by a specular wave, to last-mentioned waves (rays) were added the scattered and random rays that constituted the diffuse wave. At indoors case, the variations of the transmitted signal were also considering the following matters additionally: the building penetration, construction material, angle of incidence, floor height, position of terminal in the room, and indoor fading; also, these indoors radiocommunications presented different type of paths to reach the receiver: obscured LOS, no LOS (NLOS), and hard NLOS. The evaluation of the feasible performance for the HAPS-to-ground terminal was accomplished by means of thorough simulations. The outcomes of the experiment were presented in terms of BER vs. Eb/N0 plotting, getting significant positive conclusions for these kind of system as access network technology based on HAPS

Multi-band Wideband Channel Measurements in Indoor and Outdoor Environments above 6 GHz for 5G Networks

This document presented the results of ultra-wideband of multi-bands measurements performed in three different indoor environments such as large office, factory like and small office and one outdoor street canyon scenario at the science site of Durham University, United Kingdom. The measurements conducted using a wideband chirp sounder developed at Durham University. An analytical review of the radio wave propagation mechanisms and formulas is presented in addition to the background of the channel characteristics parameters and statistics. The parameters reviewed are the received signal strength, path loss, the excess, average and RMS delay spread, in addition to the angular parameters such as the angle of arrival (AoA), angle of departure (AoD) and the RMS angular spread. A literature survey for about 80 paper of the previous work are studied and summarised for the measurements and simulation performed to estimate different parameters in both indoor and outdoor scenarios. Two different measurements set up were performed in three indoor environments and one outdoor scenario to measure mainly, the frequency dependency in various channel characteristics parameters. In the first set the measured parameters are the received signal strength, path loss, and the excess, average and the cumulative distribution function (CDF) and the RMS delay spread in three indoor environments. While in the second set the 3D angular parameters such as AoA, AoD and RMS angular spread in both Tx and Rx sides are studied in three indoor and one outdoor environment mentioned earlier. The measurements set up and procedures are presented for each set of measurement. The measurements were performed using a wideband channel sounder up to 6 GHz for both sets. Five different frequency bands (i.e.13.4 GHz, 26.8 GHz, 54.2 GHz, 62.6 GHz and 70 GHz) were used in the first set and three bands (i.e.13.4 GHz, 26.8 GHz, 62.6 GHz) for the second set. A steerable horn antenna at both side using 3D positioner in the second set of measurements, while an omnidirectional antenna was used at the receiver side in the first set. A summary and discussion the extracted results for each set of measurements are given. Conclusions about the achieved results and the recommended future work are provided