Vision-based neural network classifiers and their applications

A thesis submitted for the degree of Doctor of Philosophy of University of LutonVisual inspection of defects is an important part of quality assurance in many fields of production. It plays a very useful role in industrial applications in order to relieve human inspectors and improve the inspection accuracy and hence increasing productivity. Research has previously been done in defect classification of wood veneers using techniques such as neural networks, and a certain degree of success has been achieved. However, to improve results in tenus of both classification accuracy and running time are necessary if the techniques are to be widely adopted in industry, which has motivated this research. This research presents a method using rough sets based neural network with fuzzy input (RNNFI). Variable precision rough set (VPRS) method is proposed to remove redundant features utilising the characteristics of VPRS for data analysis and processing. The reduced data is fuzzified to represent the feature data in a more suitable foml for input to an improved BP neural network classifier. The improved BP neural network classifier is improved in three aspects: additional momentum, self-adaptive learning rates and dynamic error segmenting. Finally, to further consummate the classifier, a uniform design CUD) approach is introduced to optimise the key parameters because UD can generate a minimal set of uniform and representative design points scattered within the experiment domain. Optimal factor settings are achieved using a response surface (RSM) model and the nonlinear quadratic programming algorithm (NLPQL). Experiments have shown that the hybrid method is capable of classifying the defects of wood veneers with a fast convergence speed and high classification accuracy, comparing with other methods such as a neural network with fuzzy input and a rough sets based neural network. The research has demonstrated a methodology for visual inspection of defects, especially for situations where there is a large amount of data and a fast running speed is required. It is expected that this method can be applied to automatic visual inspection for production lines of other products such as ceramic tiles and strip steel

Rough matroids based on coverings

The introduction of covering-based rough sets has made a substantial contribution to the classical rough sets. However, many vital problems in rough sets, including attribution reduction, are NP-hard and therefore the algorithms for solving them are usually greedy. Matroid, as a generalization of linear independence in vector spaces, it has a variety of applications in many fields such as algorithm design and combinatorial optimization. An excellent introduction to the topic of rough matroids is due to Zhu and Wang. On the basis of their work, we study the rough matroids based on coverings in this paper. First, we investigate some properties of the definable sets with respect to a covering. Specifically, it is interesting that the set of all definable sets with respect to a covering, equipped with the binary relation of inclusion $\subseteq$, constructs a lattice. Second, we propose the rough matroids based on coverings, which are a generalization of the rough matroids based on relations. Finally, some properties of rough matroids based on coverings are explored. Moreover, an equivalent formulation of rough matroids based on coverings is presented. These interesting and important results exhibit many potential connections between rough sets and matroids.Comment: 15page

A Novel Method for Acquiring Engineering-Oriented Operational Empirical Knowledge

The operational knowledge of skilled technicians gained from years of experience is invaluable for an enterprise. Possession of such knowledge will facilitate an enterprise sharing technician’s know-how and training of new employees effectively. However, until now there is rare efficient quantitative method to obtain this kind of tacit knowledge. In this paper we propose a concept of engineering-oriented operational empirical knowledge (OEK) to describe this kind of knowledge and design a framework to acquire OEK from skilled technician’s operations. The framework integrates motion analysis, motion elicitation, and intent analysis. The modular arrangement of predetermined time standards (MODAPTS) is used to divide the technician’s operational process into basic motion elements; and the variable precision rough set (VPRS) algorithm is used to extract the technician’s OEK content, which combined with the technician’s intent elicited via interview; the completed OEK is obtained. At the end of our study, an engineering case is used to validate the feasibility of the proposed method, which shows that satisfactory results have been reached for the study

不完全な情報システムのためのラフ集合モデルと知識獲得

国立大学法人長岡技術科学大

VPRS-based regional decision fusion of CNN and MRF classifications for very fine resolution remotely sensed images

Recent advances in computer vision and pattern recognition have demonstrated the superiority of deep neural networks using spatial feature representation, such as convolutional neural networks (CNN), for image classification. However, any classifier, regardless of its model structure (deep or shallow), involves prediction uncertainty when classifying spatially and spectrally complicated very fine spatial resolution (VFSR) imagery. We propose here to characterise the uncertainty distribution of CNN classification and integrate it into a regional decision fusion to increase classification accuracy. Specifically, a variable precision rough set (VPRS) model is proposed to quantify the uncertainty within CNN classifications of VFSR imagery, and partition this uncertainty into positive regions (correct classifications) and non-positive regions (uncertain or incorrect classifications). Those “more correct” areas were trusted by the CNN, whereas the uncertain areas were rectified by a Multi-Layer Perceptron (MLP)-based Markov random field (MLP-MRF) classifier to provide crisp and accurate boundary delineation. The proposed MRF-CNN fusion decision strategy exploited the complementary characteristics of the two classifiers based on VPRS uncertainty description and classification integration. The effectiveness of the MRF-CNN method was tested in both urban and rural areas of southern England as well as Semantic Labelling datasets. The MRF-CNN consistently outperformed the benchmark MLP, SVM, MLP-MRF and CNN and the baseline methods. This research provides a regional decision fusion framework within which to gain the advantages of model-based CNN, while overcoming the problem of losing effective resolution and uncertain prediction at object boundaries, which is especially pertinent for complex VFSR image classification

Variable precision rough set theory decision support system: With an application to bank rating prediction

This dissertation considers, the Variable Precision Rough Sets (VPRS) model, and its development within a comprehensive software package (decision support system), incorporating methods of re sampling and classifier aggregation. The concept of /-reduct aggregation is introduced, as a novel approach to classifier aggregation within the VPRS framework. The software is applied to the credit rating prediction problem, in particularly, a full exposition of the prediction and classification of Fitch's Individual Bank Strength Ratings (FIBRs), to a number of banks from around the world is presented. The ethos of the developed software was to rely heavily on a simple 'point and click' interface, designed to make a VPRS analysis accessible to an analyst, who is not necessarily an expert in the field of VPRS or decision rule based systems. The development of the software has also benefited from consultations with managers from one of Europe's leading hedge funds, who gave valuable insight, advice and recommendations on what they considered as pertinent issues with regards to data mining, and what they would like to see from a modern data mining system. The elements within the developed software reflect each stage of the knowledge discovery process, namely, pre-processing, feature selection, data mining, interpretation and evaluation. The developed software encompasses three software packages, a pre-processing package incorporating some of the latest pre-processing and feature selection methods a VPRS data mining package, based on a novel "vein graph" interface, which presents the analyst with selectable /-reducts over the domain of / and a third more advanced VPRS data mining package, which essentially automates the vein graph interface for incorporation into a re-sampling environment, and also implements the introduced aggregated /-reduct, developed to optimise and stabilise the predictive accuracy of a set of decision rules induced from the aggregated /-reduct

Data mining in soft computing framework: a survey

The present article provides a survey of the available literature on data mining using soft computing. A categorization has been provided based on the different soft computing tools and their hybridizations used, the data mining function implemented, and the preference criterion selected by the model. The utility of the different soft computing methodologies is highlighted. Generally fuzzy sets are suitable for handling the issues related to understandability of patterns, incomplete/noisy data, mixed media information and human interaction, and can provide approximate solutions faster. Neural networks are nonparametric, robust, and exhibit good learning and generalization capabilities in data-rich environments. Genetic algorithms provide efficient search algorithms to select a model, from mixed media data, based on some preference criterion/objective function. Rough sets are suitable for handling different types of uncertainty in data. Some challenges to data mining and the application of soft computing methodologies are indicated. An extensive bibliography is also included