Continuum Robotic Surface: Forward Kinematic Analysis and Implementation

This thesis presents a new class of biologically inspired robots: continuum robotic surfaces. This work is fueled by the question: can the interaction between robot and environment be advanced with “programmable surfaces in space?” The novelty of continuum robotic surfaces lies in their ability to be actively controlled and reconfigured in what we believe is the current “missing dimension” in robot movements — two–dimensional space. We believe that such surfaces will lend themselves to more complex applications. However, to effectively deploy such surfaces for these complex applications, kinematic models will be necessary to plan and control desired configurations. The forward kinematic models for continuum surfaces introduced herein are an initial step in achieving this goal. Then, to test the precision of our model, we validate it via hardware realizations. Lastly, with the kinematic model and hardware realization, the next step is to explore one of the aforementioned complex applications for these surfaces. We believe that a continuum robotic surface can lend itself to upper–extremity stroke rehabilitation in a novel way. Our efforts in interactively designing and building a working prototype with the clinical and staff healthcare subject matter experts at the Roger C. Peace Rehabilitation Center of the Greenville Hospital System are detailed

Design and Control of Robotic Systems for Lower Limb Stroke Rehabilitation

Lower extremity stroke rehabilitation exhausts considerable health care resources, is labor intensive, and provides mostly qualitative metrics of patient recovery. To overcome these issues, robots can assist patients in physically manipulating their affected limb and measure the output motion. The robots that have been currently designed, however, provide assistance over a limited set of training motions, are not portable for in-home and in-clinic use, have high cost and may not provide sufficient safety or performance. This thesis proposes the idea of incorporating a mobile drive base into lower extremity rehabilitation robots to create a portable, inherently safe system that provides assistance over a wide range of training motions. A set of rehabilitative motion tasks were established and a six-degree-of-freedom (DOF) motion and force-sensing system was designed to meet high-power, large workspace, and affordability requirements. An admittance controller was implemented, and the feasibility of using this portable, low-cost system for movement assistance was shown through tests on a healthy individual. An improved version of the robot was then developed that added torque sensing and known joint elasticity for use in future clinical testing with a flexible-joint impedance controller

The Research on Soft Pneumatic Actuators in Italy: Design Solutions and Applications

Interest in soft actuators has increased enormously in the last 10 years. Thanks to their compliance and flexibility, they are suitable to be employed to actuate devices that must safely interact with humans or delicate objects or to actuate bio-inspired robots able to move in hostile environments. This paper reviews the research on soft pneumatic actuators conducted in Italy, focusing on mechanical design, analytical modeling, and possible application. A classification based on the geometry is proposed, since a wide set of architectures and manufacturing solutions are available. This aspect is confirmed by the extent of scenarios in which researchers take advantage of such systems’ improved flexibility and functionality. Several applications regarding bio-robotics, bioengineering, wearable devices, and more are presented and discussed

Cable-driven parallel mechanisms for minimally invasive robotic surgery

Minimally invasive surgery (MIS) has revolutionised surgery by providing faster recovery times, less post-operative complications, improved cosmesis and reduced pain for the patient. Surgical robotics are used to further decrease the invasiveness of procedures, by using yet smaller and fewer incisions or using natural orifices as entry point. However, many robotic systems still suffer from technical challenges such as sufficient instrument dexterity and payloads, leading to limited adoption in clinical practice. Cable-driven parallel mechanisms (CDPMs) have unique properties, which can be used to overcome existing challenges in surgical robotics. These beneficial properties include high end-effector payloads, efficient force transmission and a large configurable instrument workspace. However, the use of CDPMs in MIS is largely unexplored. This research presents the first structured exploration of CDPMs for MIS and demonstrates the potential of this type of mechanism through the development of multiple prototypes: the ESD CYCLOPS, CDAQS, SIMPLE, neuroCYCLOPS and microCYCLOPS. One key challenge for MIS is the access method used to introduce CDPMs into the body. Three different access methods are presented by the prototypes. By focusing on the minimally invasive access method in which CDPMs are introduced into the body, the thesis provides a framework, which can be used by researchers, engineers and clinicians to identify future opportunities of CDPMs in MIS. Additionally, through user studies and pre-clinical studies, these prototypes demonstrate that this type of mechanism has several key advantages for surgical applications in which haptic feedback, safe automation or a high payload are required. These advantages, combined with the different access methods, demonstrate that CDPMs can have a key role in the advancement of MIS technology.Open Acces

Biomechatronics: Harmonizing Mechatronic Systems with Human Beings

This eBook provides a comprehensive treatise on modern biomechatronic systems centred around human applications. A particular emphasis is given to exoskeleton designs for assistance and training with advanced interfaces in human-machine interaction. Some of these designs are validated with experimental results which the reader will find very informative as building-blocks for designing such systems. This eBook will be ideally suited to those researching in biomechatronic area with bio-feedback applications or those who are involved in high-end research on manmachine interfaces. This may also serve as a textbook for biomechatronic design at post-graduate level

Advancing Medical Technology for Motor Impairment Rehabilitation: Tools, Protocols, and Devices

Excellent motor control skills are necessary to live a high-quality life. Activities such as walking, getting dressed, and feeding yourself may seem mundane, but injuries to the neuromuscular system can render these tasks difficult or even impossible to accomplish without assistance. Statistics indicate that well over 100 million people are affected by diseases or injuries, such as stroke, Parkinson’s Disease, Multiple Sclerosis, Cerebral Palsy, peripheral nerve injury, spinal cord injury, and amputation, that negatively impact their motor abilities. This wide array of injuries presents a challenge to the medical field as optimal treatment paradigms are often difficult to implement due to a lack of availability of appropriate assessment tools, the inability for people to access the appropriate medical centers for treatment, or altogether gaps in technology for treating the underlying impairments causing the disability. Addressing each of these challenges will improve the treatment of movement impairments, provide more customized and continuous treatment to a larger number of patients, and advance rehabilitative and assistive device technology. In my research, the key approach was to develop tools to assess and treat upper extremity movement impairment. In Chapter 2.1, I challenged a common biomechanical[GV1] modeling technique of the forearm. Comparing joint torque values through inverse dynamics simulation between two modeling platforms, I discovered that representing the forearm as a single cylindrical body was unable to capture the inertial parameters of a physiological forearm which is made up of two segments, the radius and ulna. I split the forearm segment into a proximal and distal segment, with the rationale being that the inertial parameters of the proximal segment could be tuned to those of the ulna and the inertial parameters of the distal segment could be tuned to those of the radius. Results showed a marked increase in joint torque calculation accuracy for those degrees of freedom that are affected by the inertial parameters of the radius and ulna. In Chapter 2.2, an inverse kinematic upper extremity model was developed for joint angle calculations from experimental motion capture data, with the rationale being that this would create an easy-to-use tool for clinicians and researchers to process their data. The results show accurate angle calculations when compared to algebraic solutions. Together, these chapters provide easy-to-use models and tools for processing movement assessment data. In Chapter 3.1, I developed a protocol to collect high-quality movement data in a virtual reality task that is used to assess hand function as part of a Box and Block Test. The goal of this chapter is to suggest a method to not only collect quality data in a research setting but can also be adapted for telehealth and at home movement assessment and rehabilitation. Results indicate that the data collected in this protocol are good and the virtual nature of this approach can make it a useful tool for continuous, data driven care in clinic or at home. In Chapter 3.2 I developed a high-density electromyography device for collecting motor unit action potentials of the arm. Traditional surface electromyography is limited by its ability to obtain signals from deep muscles and can also be time consuming to selectively place over appropriate muscles. With this high-density approach, muscle coverage is increased, placement time is decreased, and deep muscle activity can potentially be collected due to the high-density nature of the device[GV2] . Furthermore, the high-density electromyography device is built as a precursor to a high-density electromyography-electrical stimulation device for functional electrical stimulation. The customizable nature of the prototype in Chapter 3.2 allows for the implementation both recording and stimulating electrodes. Furthermore, signal results show that the electromyography data obtained from the device are of high quality and are correlated with gold standard surface electromyography sensors. One key factor in a device that can record and then stimulate based on the information from the recorded signals is an accurate movement intent decoder. High-quality movement decoders have been designed by closed-loop device controllers in the past, but they still struggle when the user interacts with objects of varying weight due to underlying alterations in muscle signals. In Chapter 4, I investigate this phenomenon by administering an experiment where participants perform a Box and Block Task with objects of 3 different weights, 0 kg, 0.02 kg, and 0.1 kg. Electromyography signals of the participants right arm were collected and co-contraction levels between antagonistic muscles were analyzed to uncover alterations in muscle forces and joint dynamics. Results indicated contraction differences between the conditions and also between movement stages (contraction levels before grabbing the block vs after touching the block) for each condition. This work builds a foundation for incorporating object weight estimates into closed-loop electromyography device movement decoders. Overall, we believe the chapters in this thesis provide a basis for increasing availability to movement assessment tools, increasing access to effective movement assessment and rehabilitation, and advance the medical device and technology field

Infusing Kirigami Principles Into Design of Mechanical Properties

The emergence of mechanical metamaterials — which derive their properties primarily from the underlying architecture rather than the constituent material — has unleashed a new era of material design and functionalities. To fully materialize the promising potentials of metamaterials, it is crucial to develop versatile, scalable, and easy-to-fabricate methods that can both generate and tailor the underlying periodic architecture. To this end, we propose the use of kirigami — a popular recreational art of cutting and manipulating paper — as a platform to create periodicity and super-stretchability. Kirigami has become a design and fabrication framework for constructing metamaterials, robotic tools, and mechanical devices of vastly different sizes. In this dissertation, our target is to study the mechanical behavior --- mostly in the field of dynamics and kinematics--- of kirigami metamaterials and establish a framework for future studies. For the first time, our study focuses on wave propagation in a buckled kirigami sheet with uniformly distributed parallel cuts.When we apply an in-plane stretching force that exceeds a critical threshold, this kirigami sheet buckles and generates an out-of-plane periodic deformation pattern that can change the propagation direction of passing waves. That is, waves entering the buckled Kirigami unit cells through its longitudinal direction can turn to the out-of-plane direction. As a result, the stretched kirigami sheet shows wave propagation bandgaps in specific frequency ranges. We have two approaches toward manipulating the bandgap, 1) Tuning the bandgap by controlling the stretching displacement to change the distribution of cross-section of area and distribution of moment of inertia inside of the periodic unit cell of kirigami metamaterial and 2) programming stretched kirigami material by intentionally sequencing its constitutive mechanical bits. Such sequencing exploits the multi-stable nature of the stretched-buckled kirigami, which allows each mechanical bit to settle into two stable equilibria with different shapes (aka. “0” and “1” states). Therefore, by designing the sequence of 0 and 1 bits, one can fundamentally change the underlying periodicity of the kirigami and thus program the phononic bandgap frequencies. To this end, our study develops an algorithm to identify the unique periodicities using “n-strings” consisting of n mechanical bits

Design and development of robust hands for humanoid robots

Design and development of robust hands for humanoid robot