Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Design and Control of Robotic Systems for Lower Limb Stroke Rehabilitation

Lower extremity stroke rehabilitation exhausts considerable health care resources, is labor intensive, and provides mostly qualitative metrics of patient recovery. To overcome these issues, robots can assist patients in physically manipulating their affected limb and measure the output motion. The robots that have been currently designed, however, provide assistance over a limited set of training motions, are not portable for in-home and in-clinic use, have high cost and may not provide sufficient safety or performance. This thesis proposes the idea of incorporating a mobile drive base into lower extremity rehabilitation robots to create a portable, inherently safe system that provides assistance over a wide range of training motions. A set of rehabilitative motion tasks were established and a six-degree-of-freedom (DOF) motion and force-sensing system was designed to meet high-power, large workspace, and affordability requirements. An admittance controller was implemented, and the feasibility of using this portable, low-cost system for movement assistance was shown through tests on a healthy individual. An improved version of the robot was then developed that added torque sensing and known joint elasticity for use in future clinical testing with a flexible-joint impedance controller

A Review Study for Robotic Exoskeletons Rehabilitation Devices

Nowadays, robotic exoskeletons demonstrated great abilities to replace traditional rehabilitation processes for activating neural abilities performed by physiotherapists. The main aim of this review study is to determine a state-of-the-art robotic exoskeleton that can be used for the rehabilitation of the lower limb of people who have mobile disabilities as a result of stroke and musculoskeletal conditions. The study presented the anatomy of the lower limb and the biomechanics of human gait to explain the mechanism of the limb, which helps in constructing a robotic exoskeleton. A state-of-the-art review of more than 100 articles related to robotic exoskeletons and their constructions, functionality, and rehabilitation capabilities are accurately implemented. Moreover, the study included a review of upper limb rehabilitation that has been studied locally and successfully applied to patients who exhibited significant improvements. Results of recent studies herald an abundant future for robotic exoskeletons used in the rehabilitation of the lower extremity. Significant improvement in the mechanism and design, as well as the quality, were observed. Also, impressive results were obtained from the performance when used by patients. This study concludes that working and improving the robotic devices continuously in accordance with the cases are necessary to be treated with the best results and the lowest cost

Specifying and verifying active vision-based robotic systems with the Signal environment

International audienceActive vision-based robot design involves a variety of techniques and formalisms, from kinematics to control theory, signal processing and computer science. The programming of such systems therefore requires environments with many different functionalities, in a very integrated fashion in order to ensure consistency of the different parts. In significant applications, the correct specification of the global controller is not simple to achieve, as it mixes different levels of behavior, and must respect properties. In this paper we want to advocate the use of a strongly integrated environment able to deal with the design of such systems from the specification of both continuous and discrete parts down to the verification of dynamic behavior. The synchronous language signal is used here as a candidate integrated environment for the design of active vision systems. Our experiments show that signal, while not being an environment devoted to for robotics (but more generally dedicated to control theory and signal processing), presents functionalities and a degree of integration that are relevant to the safe design of active vision-based robotics system

MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics

El libro de actas recoge las aportaciones de los autores a través de los correspondientes artículos a la Dinámica de Sistemas Multicuerpo y la Mecatrónica (Musme). Estas disciplinas se han convertido en una importante herramienta para diseñar máquinas, analizar prototipos virtuales y realizar análisis CAD sobre complejos sistemas mecánicos articulados multicuerpo. La dinámica de sistemas multicuerpo comprende un gran número de aspectos que incluyen la mecánica, dinámica estructural, matemáticas aplicadas, métodos de control, ciencia de los ordenadores y mecatrónica. Los artículos recogidos en el libro de actas están relacionados con alguno de los siguientes tópicos del congreso: Análisis y síntesis de mecanismos ; Diseño de algoritmos para sistemas mecatrónicos ; Procedimientos de simulación y resultados ; Prototipos y rendimiento ; Robots y micromáquinas ; Validaciones experimentales ; Teoría de simulación mecatrónica ; Sistemas mecatrónicos ; Control de sistemas mecatrónicosUniversitat Politècnica de València (2011). MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/13224Archivo delegad

Proceedings of the NASA Conference on Space Telerobotics, volume 2

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Visual-based decision for iterative quality enhancement in robot drawing.

Kwok, Ka Wai.Thesis (M.Phil.)--Chinese University of Hong Kong, 2005.Includes bibliographical references (leaves 113-116).Abstracts in English and Chinese.ABSTRACT --- p.iChapter 1. --- INTRODUCTION --- p.1Chapter 1.1 --- Artistic robot in western art --- p.1Chapter 1.2 --- Chinese calligraphy robot --- p.2Chapter 1.3 --- Our robot drawing system --- p.3Chapter 1.4 --- Thesis outline --- p.3Chapter 2. --- ROBOT DRAWING SYSTEM --- p.5Chapter 2.1 --- Robot drawing manipulation --- p.5Chapter 2.2 --- Input modes --- p.6Chapter 2.3 --- Visual-feedback system --- p.8Chapter 2.4 --- Footprint study setup --- p.8Chapter 2.5 --- Chapter summary --- p.10Chapter 3. --- LINE STROKE EXTRACTION AND ORDER ASSIGNMENT --- p.11Chapter 3.1 --- Skeleton-based line trajectory generation --- p.12Chapter 3.2 --- Line stroke vectorization --- p.15Chapter 3.3 --- Skeleton tangential slope evaluation using MIC --- p.16Chapter 3.4 --- Skeleton-based vectorization using Bezier curve interpolation --- p.21Chapter 3.5 --- Line stroke extraction --- p.25Chapter 3.6 --- Line stroke order assignment --- p.30Chapter 3.7 --- Chapter summary --- p.33Chapter 4. --- PROJECTIVE RECTIFICATION AND VISION-BASED CORRECTION --- p.34Chapter 4.1 --- Projective rectification --- p.34Chapter 4.2 --- Homography transformation by selected correspondences --- p.35Chapter 4.3 --- Homography transformation using GA --- p.39Chapter 4.4 --- Visual-based iterative correction example --- p.45Chapter 4.5 --- Chapter summary --- p.49Chapter 5. --- ITERATIVE ENHANCEMENT ON OFFSET EFFECT AND BRUSH THICKNESS --- p.52Chapter 5.1 --- Offset painting effect by Chinese brush pen --- p.52Chapter 5.2 --- Iterative robot drawing process --- p.53Chapter 5.3 --- Iterative line drawing experimental results --- p.56Chapter 5.4 --- Chapter summary --- p.67Chapter 6. --- GA-BASED BRUSH STROKE GENERATION --- p.68Chapter 6.1 --- Brush trajectory representation --- p.69Chapter 6.2 --- Brush stroke modeling --- p.70Chapter 6.3 --- Stroke simulation using GA --- p.72Chapter 6.4 --- Evolutionary computing results --- p.77Chapter 6.5 --- Chapter summary --- p.95Chapter 7. --- BRUSH STROKE FOOTPRINT CHARACTERIZATION --- p.96Chapter 7.1 --- Footprint video capturing --- p.97Chapter 7.2 --- Footprint image property --- p.98Chapter 7.3 --- Experimental results --- p.102Chapter 7.4 --- Chapter summary --- p.109Chapter 8. --- CONCLUSIONS AND FUTURE WORKS --- p.111BIBLIOGRAPHY --- p.11

Type Synthesis and Performance Optimization of Parallel Manipulators

Parallel robots have been widely employed in industrial applications. There are still some challenging topics in the fundamental research, e.g., the primary problem mobility analysis has not been solved for about 150 years. A universal mobility equation for all kinds of parallel architectures has not been found. Another issue lies on the performance measurements for parallel manipulators. There are plenty of kinematic and dynamic performance indices. However, the various ranges and scales of these indicators make the optimal design considering multiple indices complicated. It is essential to search for a unified approach to normalize performance indicators. More dynamic performance measurement indicators should be raised to explore the dynamic features and complete the theory for parallel mechanisms. In this research, an improved mobility equation is designed to reveal the degrees of freedom for a special class of parallel robots. A novel methodology called the kinematic joint matrix is proposed. It possesses the mapping relations with parallel manipulators. A series of 2-6 degrees of freedom parallel architectures is denoted by the kinematic joint matrix. The theory of screw is employed to check the feasibility from several kinds of parallel structures. A special block diagram is introduced to distinguish various kinematic joint matrices. Since this family of parallel robots contains various motion characteristics, four parallel robots with distinct features are selected. Based on the kinematic models, three categories of singularities are explored. The operational and reachable workspaces of the pure-translational parallel robots are searched and the parametric analyses are reported. The linkage’s impacts for the reachable workspace of the mixed-motion parallel architectures are investigated. The novel performance level index is designed to unify the positive performance index and demonstrated the performance rank for any pose (position and orientation). The dexterity index is utilized as an example to verify the characteristics of the level index. The distributions and parametric analyses of two novel mass-related performances are studied. The dimension synthesis of a selected planar parallel robot is presented based on the non-dominated genetic algorithm II. The experiment results testify the correctness of the mobility and kinematic mathematical models of this mechanism

A Survey on the Current Status and Future Challenges Towards Objective Skills Assessment in Endovascular Surgery

Minimally-invasive endovascular interventions have evolved rapidly over the past decade, facilitated by breakthroughs in medical imaging and sensing, instrumentation and most recently robotics. Catheter based operations are potentially safer and applicable to a wider patient population due to the reduced comorbidity. As a result endovascular surgery has become the preferred treatment option for conditions previously treated with open surgery and as such the number of patients undergoing endovascular interventions is increasing every year. This fact coupled with a proclivity for reduced working hours, results in a requirement for efficient training and assessment of new surgeons, that deviates from the “see one, do one, teach one” model introduced by William Halsted, so that trainees obtain operational expertise in a shorter period. Developing more objective assessment tools based on quantitative metrics is now a recognised need in interventional training and this manuscript reports the current literature for endovascular skills assessment and the associated emerging technologies. A systematic search was performed on PubMed (MEDLINE), Google Scholar, IEEXplore and known journals using the keywords, “endovascular surgery”, “surgical skills”, “endovascular skills”, “surgical training endovascular” and “catheter skills”. Focusing explicitly on endovascular surgical skills, we group related works into three categories based on the metrics used; structured scales and checklists, simulation-based and motion-based metrics. This review highlights the key findings in each category and also provides suggestions for new research opportunities towards fully objective and automated surgical assessment solutions