Energy networks in sustainable cities: towards a lull integration of renewable systems in urban area

The European Commission is supporting many projects intended to improve the use of renewable energy sources and a special attention has been devoted to the case of large scale urban areas. The project POLYCITY represents a significant demonstration of this energy policy which is applied to 3 cities: Barcelona, Stuttgart and Torino. The case of Torino appears of particular relevance because it is dedicated to the improvement of existing building and installations which is in our opinion the most frequent situation. In particular the most qualifying characteristic of Torino project is the installation of a new combined heat and power generator (CHP) coupled with the existing district heating and an absorption chiller in order to supply energy more efficiently in a district which include the Housing Authority of the Province of Torino (ATC) and 30 council buildings. The paper describes this project highlighting the use of renewable sources and the initial results. The preliminary assessment of our experiment will be discussed according to socio-economic, environmental and energetic indicators

Towards Intelligent Distribution Systems: Solutions for Congestion Forecast and Dynamic State Estimation Based Protection

The electrical distribution systems are undergoing drastic changes such as increasing penetration level of distributed renewable energy sources, energy storage, electrification of energy-efficient loads such as heat pumps and electric vehicles, etc., since the last decade, and more changes are expected in the future. These changes pose challenges for the distribution system operators such as increased level of network congestions, voltage variations, as well as protection settings and coordination, etc. These will require the development of new paradigms to operate distribution systems securely, safely, and economically while hosting a large amount of renewable energy sources.First, the thesis proposed a comprehensive assessment framework to assess the distribution system operator’s future-readiness and support them in determining the current status of their network infrastructures, business models, and policies and thus to identify areas for required developments. The analysis for the future-readiness of the three distribution system operators (from France, The Netherlands, and Sweden) using the proposed assessment framework has shown that presently the distribution system operators have a rather small penetration of renewable energy sources in their grids, however, which is expected to increase in the future. The distribution system operators would need investments in flexibilities, novel forecasting techniques, advanced grid control as well as improved protection schemes. The need for the development of new business models for customers and changes in the policy and regulations are also suggested by the analysis. Second, the thesis developed a congestion forecast tool that would support the distribution system operators to forecast and visualize network overloading and voltage variations issues for multiple forecasting horizons ranging from close-to-real time to day-ahead. The tool is based on a probabilistic power flow that incorporates forecasts of production from solar photovoltaic and electricity demand combined with load models along with the consideration of different operating modes of solar photovoltaic inverters to enhance the accuracy. The congestion forecast tool can be integrated into the existing distribution management systems of distribution system operators via an open cross-platform using Codex Smart Edge technology of Atos Worldgrid. The congestion forecast tool has been used in a case study for two real distribution systems (7-bus feeder and 141-bus system). It was demonstrated in the case study that the tool can predict the congestion in the networks with various prediction horizons. The congestion forecast tool would support distribution system operators by forecasting the network congestion and setting up a congestion management plan.Finally, the dynamic state estimation based protection scheme supported by advanced measurement technologies developed within EU project UNITED-GRID has been implemented and validated experimentally at Chalmers power system laboratory. This dynamic state estimation based protection scheme has a strong advantage over the traditional protection scheme as it does not require any relay settings and coordination which can overcome the protection challenges arising in distribution grids with a large amount of renewable energy sources. The results from the validation of the dynamic state estimation based protection scheme at Chalmers laboratory have shown that the fault detection using this scheme has worked properly as expected for an application of the line protection

Smart grid architecture for rural distribution networks: application to a Spanish pilot network

This paper presents a novel architecture for rural distribution grids. This architecture is designed to modernize traditional rural networks into new Smart Grid ones. The architecture tackles innovation actions on both the power plane and the management plane of the system. In the power plane, the architecture focuses on exploiting the synergies between telecommunications and innovative technologies based on power electronics managing low scale electrical storage. In the management plane, a decentralized management system is proposed based on the addition of two new agents assisting the typical Supervisory Control And Data Acquisition (SCADA) system of distribution system operators. Altogether, the proposed architecture enables operators to use more effectively—in an automated and decentralized way—weak rural distribution systems, increasing the capability to integrate new distributed energy resources. This architecture is being implemented in a real Pilot Network located in Spain, in the frame of the European Smart Rural Grid project. The paper also includes a study case showing one of the potentialities of one of the principal technologies developed in the project and underpinning the realization of the new architecture: the so-called Intelligent Distribution Power Router.Postprint (published version

Developing novel technologies and services for intelligent low voltage electricity grids: cost–benefit analysis and policy implications

The paper presents a set of prototype smart grid technologies and services and validates the economic viability of the proposed solution using cost–benefit analysis (CBA). The study considered the EU-funded project called RESOLVD and implemented the technologies and services in a real-life pilot. the technologies and services on the EU-funded H2020. The paper focuses on the analysis of technological solutions which enhance the operational efficiency and the hosting capacity of low-voltage electricity distribution grids. The solutions provided better integration of a hybrid battery storage system, with the grid interfacing power electronics, smart gateways for the interconnection of assets at the grid edge, and sensors enhancing infrastructure observability and control. The result from the CBA indicates the economic viability of the project, high scalability, and replicability. The economic benefits were realized with the breakeven value of eight secondary substations (SS) and 16 feeders. The scenario test on the DSO’s willingness to pay for the software as a service (SaaS) revealed that the payback period can further be reduced by almost half with a higher internal rate of return (IRR) and net present value (NPV). Both the CBA and scenario tests showed RESOLVD solution can become more economically viable when deployed in largescale. Moreover, the CBA results provide evidence to the energy policy by allowing DSOs to consider both CAPEX and OPEX for better investment decisions. Further, the paper proposes an alternative business approach that shifts from grid reinforcement to service provision. The paper also discusses the research implications on energy policy and business.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraObjectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats SosteniblesPostprint (published version

Evaluation of Smart Grid projects for inclusion in the third Union-wide list of Projects of Common Interest: Evaluation of candidate projects in the TEN-E priority thematic area of smart grids deployment

The document presents the outcome of the evaluation process of candidate Projects of Common Interest in the priority thematic area of ‘smart grids deployment’, as set out in the trans-European energy infrastructure regulation. The evaluation follows the guidelines of the assessment framework for smart grid Projects of Common Interest, 2017 update, developed by the JRC and adopted by the smart grid Regional Group. The report aims to assist the smart grids Regional Group in proposing projects of common interest in the area of smart grids deployment to be included in the 3rd Union list of Projects of Common Interest.JRC.C.3-Energy Security, Distribution and Market

A framework for smart production-logistics systems based on CPS and industrial IoT

Industrial Internet of Things (IIoT) has received increasing attention from both academia and industry. However, several challenges including excessively long waiting time and a serious waste of energy still exist in the IIoT-based integration between production and logistics in job shops. To address these challenges, a framework depicting the mechanism and methodology of smart production-logistics systems is proposed to implement intelligent modeling of key manufacturing resources and investigate self-organizing configuration mechanisms. A data-driven model based on analytical target cascading is developed to implement the self-organizing configuration. A case study based on a Chinese engine manufacturer is presented to validate the feasibility and evaluate the performance of the proposed framework and the developed method. The results show that the manufacturing time and the energy consumption are reduced and the computing time is reasonable. This paper potentially enables manufacturers to deploy IIoT-based applications and improve the efficiency of production-logistics systems

The 2005 European e-Business Readiness Index

Assessment of the eEurope 2005 Action Plan Benchmarking Index “E-Business Readiness Composite Indicator” using data collected by National Statistical Institutes and harmonised by Eurostat, using surveys “ICT usage of enterprises”, with reference years 2003 and 2004. This report contains data from 26 countries as collected in 2004 and as reported by Eurostat in June 2005. Performed analyses include obustness analysis, uncertainty and sensitivity analysis for two categories of ICT (Adoption and Use), univariate analysis of basic indicators; principal component analysis and finally assessment of resulted country rankings and methodological notes.ICT, e-business, adoption, composite, indicator, eEurope, e-Europe, EU, multiple imputation imputation