Advanced Linear Identification Techniques For Signal Processing And Digital Video Broadcasting

Linear identification technique is to linearly embed a piece of unique information into digital media data for the purpose of satisfying specific demands such as identification, annotation, and copyright, etc. We need to consider the quantity and the quality of identification data to be embedded as well as the corresponding interference to the original subject signal. However, there exist no generalized computationally-efficient optimization techniques for linear identification up to now. Therefore, in this dissertation work, we try to theoretically investigate the advanced linear identification techniques and combat the tradeoff problems between the quality of the embedded identification data and the quality of the subject signal. Two particular signal processing and telecommunication applications, namely transmitter identification and digital watermarking, will be exploited in this work. We propose a novel optimization paradigm for both digital terrestrial television (DTV) systems and multiple digital watermarking systems to maximize the overall signal-to-interference-plus-noise ratio (SINR) over both identification and subject signals. The new theories and practice related to pseudo random sequences, extended arithmetic-geometric mean inequality, and constrained overall system performance are also presented in this dissertation

Geometric Capacity Studies for DTV Transmitter Identification By Using Kasami Sequences

The transmitter identification of the DTV systems becomes crucial nowadays. Transmitter identification (TxID, or transmitter fingerprinting) technique is used to detect, diagnose and classify the operating status of any radio transmitter of interest. A pseudo random sequence was proposed to be embedded into the DTV signal before transmission. Thus, the transmitter identification can be realized by invoking the cross-correlation functions between the received signal and the possible candidates of the pseudo random sequences. Gold sequences and Kasami sequences are two excellent candidates for the transmitter ID sequences as they provide a large family of nearly-orthogonal codes. In order to investigate the sensitivity of the transmitter identification in different topologies and Kasami sequences with different length, we present the analysis here for four different geometric layouts, namely circular distribution, doubly concentric and circular distribution, square array and hexagonal tessellation. The covered area and the lowest received signal-to-interference ratio are considered as two essential parameters for the multiple-transmitter identification. It turns out to be that the larger the Kasami sequence length, the larger the received signal-to-interference ratio. Our new analysis can be used to determine the required Kasami sequence length for a specific broadcasting coverage

Orthogonal Pseudo-Random Sequence Enabled Cognitive and Emergency Communications

With the ever-increasing demands for the broadband mobile communications, it is becoming more and more difficult to accommodate all existing and emerging wireless services and applications due to the limited communication resources particularly radio spectrum. In addition, system parameters of wireless communications often need to be adapted due to the variation of channel characteristics and user demands. Cognitive communication is emerged as an effective technique, particularly to improve the utilization rate of limited communication resources adaptively according to the change in its operating conditions and requirements. To handle these challenges efficiently and reliably in cognitive radio scenario, cyclic prefix (CP) of the OFDM system is precoded in this thesis using pseudo-random sequence. This signaling link can effectively carry transmission parameters and system adaptation information. In first part of the thesis, mutual interference minimization and transmission power adaptation enabled by the additional signaling link are also investigated. In order to make use of this precoded cyclic prefix (PCP) signaling link, an efficient demodulation scheme is needed to reduce the implementation complexity. Therefore, a low complexity signaling demodulator along with a multipath combining technique to further improve the performance in real communication scenario like in multipath channel is proposed in the thesis. The final aspect of this thesis is the investigation of a robust communication system using digital television (DTV) transmitter identification watermark signal which is also a modulated pseudo-random sequence. The previous study on PCP signaling is thus extended to an emergency communication system using DTV watermark. It is found that watermark based communication system is more robust than the DTV broadcasting and can reach a much wider coverage with significantly increased network reliability, which is suitable for national emergency situations

Transmit Diversity Code Filter Sets (TDCFSs), an MISO Antenna Frequency Predistortion Scheme for ATSC 3.0

"(c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.")Transmit diversity code filter sets (TDCFSs) are a method of predistorting the common waveforms from multiple transmitters in the same frequency channel, as in a single frequency network, in order to minimize the possibility of cross-interference among the transmitted signals over the entire reception area. This processing is achieved using all-pass linear filters, allowing the resulting combination of predistortion and multipath to be properly compensated as part of the equalization process in the receiver. The filter design utilizes an iterative computational approach, which minimizes cross-correlation peak side lobe under the constraints of number of transmitters and delay spread, allowing customization for specific network configurations. This paper provides an overview of the TDCFS multiple-input single output antenna scheme adopted in ATSC 3.0, together with experimental analysis of capacity and specific worst-case conditions that illustrate the benefits of using the TDCFS approach.Lopresto, S.; Citta, R.; Vargas, D.; Gómez Barquero, D. (2016). Transmit Diversity Code Filter Sets (TDCFSs), an MISO Antenna Frequency Predistortion Scheme for ATSC 3.0. IEEE Transactions on Broadcasting. 62(1):271-280. doi:10.1109/TBC.2015.2505400S27128062

The Deep Space Network, volume 4 Progress report, May - Jun. 1971

Deep Space Network mission support activities, telemetry, and data systems for Pioneer, Helios, Viking, and Mars 71 project

The Deep Space Network, volume 4

Deep Space Network progress report, including mission support, development and implementation, and operations and facilitie

Enabling Technology and Algorithm Design for Location-Aware Communications

Location-awareness is emerging as a promising technique for future-generation wire­ less network to adaptively enhance and optimize its overall performance through location-enabled technologies such as location-assisted transceiver reconfiguration and routing. The availability of accurate location information of mobile users becomes the essential prerequisite for the design of such location-aware networks. Motivated by the low locationing accuracy of the Global Positioning System (GPS) in dense multipath environments, which is commonly used for acquiring location information in most of the existing wireless networks, wireless communication system-based po­sitioning systems have been investigated as alternatives to fill the gap of the GPS in coverage. Distance-based location techniques using time-of-arrival (TOA) mea­surements are commonly preferred by broadband wireless communications where the arrival time of the signal component of the First Arriving Path (FAP) can be con­verted to the distance between the receiver and the transmitter with known location. With at least three transmitters, the location of the receiver can be determined via trilatération method. However, identification of the FAP’s signal component in dense multipath scenarios is quite challenging due to the significantly weaker power of the FAP as compared with the Later Arriving Paths (LAPs) from scattering, reflection and refraction, and the superposition of these random arrival LAPs’ signal compo­ nents will become large interference to detect the FAP. In this thesis, a robust FAP detection scheme based on multipath interference cancellation is proposed to im­ prove the accuracy of location estimation in dense multipath environments. In the proposed algorithm, the signal components of LAPs is reconstructed based on the estimated channel and data with the assist of the communication receiver, and sub­ sequently removed from the received signal. Accurate FAP detection results are then achieved with the cross-correlation between the interference-suppressed signal and an augmented preamble which is the combination of the original preamble for com­ munications and the demodulated data sequences. Therefore, more precise distance estimation (hence location estimation) can be obtained with the proposed algorithm for further reliable network optimization strategy design. On the other hand, multiceli cooperative communication is another emerging technique to substantially improve the coverage and throughput of traditional cellular networks. Location-awareness also plays an important role in the design and imple­mentation of multiceli cooperation technique. With accurate location information of mobile users, the complexity of multiceli cooperation algorithm design can be dra­matically reduced by location-assisted applications, e.g., automatic cooperative base station (BS) determination and signal synchronization. Therefore, potential latency aroused by cooperative processing will be minimized. Furthermore, the cooperative BSs require the sharing of certain information, e.g., channel state information (CSI), user data and transmission parameters to perform coordination in their signaling strategies. The BSs need to have the capabilities to exchange available information with each other to follow up with the time-varying communication environment. As most of broadband wireless communication systems are already orthogonal frequency division multiplexing (OFDM)-based, a Multi-Layered OFDM System, which is spe­cially tailored for multiceli cooperation is investigated to provide parallel robust, efficient and flexible signaling links for BS coordination purposes. These layers are overlaid with data-carrying OFDM signals in both time and frequency domains and therefore, no dedicated radio resources are required for multiceli cooperative networks. In the final aspect of this thesis, an enhanced channel estimation through itera­ tive decision-directed method is investigated for OFDM system, which aims to provide more accurate estimation results with the aid of the demodulated OFDM data. The performance of traditional training sequence-based channel estimation is often lim­ ited by the length of the training. To achieve acceptable estimation performance, a long sequence has to be used which dramatically reduces the transmission efficiency of data communication. In this proposed method, the restriction of the training se­quence length can be removed and high channel estimation accuracy can be achieved with high transmission efficiency, and therefore it particular fits in multiceli coopera­tive networks. On the other hand, as the performance of the proposed FAP detection scheme also relies on the accuracy of channel estimation and data detection results, the proposed method can be combined with the FAP detection scheme to further optimize the accuracy of multipath interference cancellation and FAP detection

Interface air pour systèmes de navigation en bande S : étude détaillée des signaux OFDM

Positioning in urban or indoor environment is a hot topic, either due to regulations such as the E911 requiring US mobile telecommunication operators to be able to locate their subscribers in case of emergency, or due to the market development, with the extension of location - based services targeting the mass market concentrated in metropolitan areas. In urban or indoor areas, it is generally recognized that satellite - based positioning systems are not suitable (alone) to provide a continuous, reliable and accurate position to the user. Therefore, alternative positioning techniques may be useful to complement or replace satellite positioning in these environments. This PhD study ha s studied the possibility of using a mobile TV system based on the DVB - SH standard as system of opportunity for positioning. The advantage s of using a DVB - SH system for positioning are multiple. First, such system has a good availability in metropolitan areas, including indoor. Secondly, the emitters are synchronized and their density should be sufficient to track signals from several emitters simultaneously. This opens the possibility of using timing measurements from several emitters to find a position by trilateration . Also, the large bandwidth of the TV signal, required for the transmission of video content, should be beneficial for the accuracy of the timing measurements and for the robustness against multipath . Therefore, DVB - SH system seems to be an interesting candidate as system of opportunity for positioning. However, several challenges are to be solved for such a solution to be relevant. First, the signals propagate in the urban environment, which creates challenging conditions for positioning su ch as strong power fading, blockage of the desired line - of - sight signal or large echoes. Secondly, the DVB - SH standard uses an OFDM modulation, which has not been studied for positioning purpose. Therefore, techniques for fine tracking of the first receive d signal replica will have to be developed. Finally, a particularity of modern broadcast system is the use of a Single Frequency Network, in which all emitters send the same signal on the same carrier frequency. Therefore emitter identification in a Single Frequency will be another issue to be solved. This PhD study has proved the feasibility of positioning using DVB - SH signals. The main contributions of this work are the propositions of (1) an OFDM signal delay tracking method working in urban propagation channels, and (2) a modification to the network deployment permitting emitter identification and (3) a first assessment of the position accuracy using the proposed algorithms. These two methods have very low impact on the initial TV broadcasting service if the right set of signal parameters is chosen: no signal modification is required and the network deployment modification uses a feature already present in the DVB - SH standard. The positioning method was simulated using real urban propagation channel measurements. The obtained position has root mean square error of 4 0m. The main error contribution comes from tracking a non - line - of - sight signal. Further work would be required to deal with this issue, which would lower the position root mean square error to 7 m, which has been locally observed in the simulation for good tracking conditionsLe positionnement en environnement urbain est un domaine de recherche actif, de par la croissance des services grand public liées à la localisation, et à cause de réglementations émergentes liées aux situations d'urgence (E911). En environnement urbain ou à l'intérieur des bâtiments, il est communément admis que les systèmes de positionnement basés sur des satellites ne sont pas suffisants pour fournir une position précise, fiable et de manière continue. Des techniques de positionnement alternatives sont donc développées afin de remplacer ou compléter les systèmes de positionnement par satellite. Cette thèse étudie la possibilité de fournir un service de positionnement utilisant un futur système de diffusion de télévison vers les mobiles basé sur le standard DVB-SH. Le principal attrait de ce système pour du positionnement est sa bonne couverture en milieu urbain, ainsi que l'utilisation d'un réseau d'émetteurs synchronisés. Il est donc possible d'employer des mesures de temps d'arrivée des signaux afin de réaliser une triangulation pour calculer la position d'un récepteur. Afin de fournir ce service innovant, des techniques spécifiques d'estimation de pseudo-distance et d'identification d'émetteurs ont été développées dans le cadre de cette thèse. Le principal résultat de cette étude est d'avoir montré la faisabilité du positionnement utilisant un système DVB-SH, ne nécessitant que de légères modifications du système qui n'apportent aucune dégradation auservice de diffusion TV. De premières simulations ont montré une précision de positionnement autour de 40m en utilisant des mesures réalistes de canal de propagation urbain

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions