981 research outputs found

    Applications of Geometric Algorithms to Reduce Interference in Wireless Mesh Network

    Full text link
    In wireless mesh networks such as WLAN (IEEE 802.11s) or WMAN (IEEE 802.11), each node should help to relay packets of neighboring nodes toward gateway using multi-hop routing mechanisms. Wireless mesh networks usually intensively deploy mesh nodes to deal with the problem of dead spot communication. However, the higher density of nodes deployed, the higher radio interference occurred. This causes significant degradation of system performance. In this paper, we first convert network problems into geometry problems in graph theory, and then solve the interference problem by geometric algorithms. We first define line intersection in a graph to reflect radio interference problem in a wireless mesh network. We then use plan sweep algorithm to find intersection lines, if any; employ Voronoi diagram algorithm to delimit the regions among nodes; use Delaunay Triangulation algorithm to reconstruct the graph in order to minimize the interference among nodes. Finally, we use standard deviation to prune off those longer links (higher interference links) to have a further enhancement. The proposed hybrid solution is proved to be able to significantly reduce interference in a wireless mesh network in O(n log n) time complexity.Comment: 24 Pages, JGraph-Hoc Journal 201

    High-Performance Broadcast and Multicast Protocols for Multi-Radio Multi-Channel Wireless Mesh Networks

    Get PDF
    Recently, wireless mesh networks (WMNs) have attracted much attention. A vast amount of unicast, multicast and broadcast protocols has been developed for WMNs or mobile ad hoc networks (MANETs). First of all, broadcast and multicast in wireless networks are fundamentally different from the way in which wired networks function due to the well-known wireless broadcast/multicast advantage. Moreover, most broadcast and multicast protocols in wireless networks assume a single-radio single-channel and single-rate network model, or a generalized physical model, which does not take into account the impact of interference. This dissertation focuses on high-performance broadcast and multicast protocols designed for multi-radio multi-channel (MRMC) WMNs. MRMC increases the capacity of the network from different aspects. Multi-radio allows mesh nodes to simultaneously send and receive through different radios to its neighbors. Multi-channel allows channels to be reused across the network, which expands the available spectrum and reduces the interference. Unlike MANETs, WMNs are assumed to be static or with minimal mobility. Therefore, the main design goal in WMNs is to achieve high throughput rather than to maintain connectivity. The capacity of WMNs is constrained by the interference caused by the neighbor nodes. One direct design objective is to minimize or reduce the interference in broadcast and multicast. This dissertation presents a set of broadcast and multicast protocols and mathematical formulations to achieve the design goal in MRMC WMNs. First, the broadcast problem is addressed with full consideration of both inter-node and intra-node interference to achieve efficient broadcast. The interference-aware broadcast protocol simultaneously achieves full reliability, minimum broadcast or multicast latency, minimum redundant transmissions, and high throughput. With an MRMC WMN model, new link and channel quality metrics are defined and are suitable for the design of broadcast and multicast protocols. Second, the minimum cost broadcast problem (MCBP), or minimum number of transmissions problem, is studied for MRMC WMNs. Minimum cost broadcast potentially allows more effective and efficient schedule algorithms to be designed. The proposed protocol with joint consideration of channel assignment reduces the interference to improve the throughput in the MCBP. Minimum cost broadcast in MRMC WMNs is very different from that in the single radio single channel scenario. The channel assignment in MRMC WMNs is used to assign multiple radios of every node to different channels. It determines the actual network connectivity since adjacent nodes have to be assigned to a common channel. Transmission on different channels makes different groups of neighboring nodes, and leads to different interference. Moreover, the selection of channels by the forward nodes impacts on the number of radios needed for broadcasting. Finally, the interference optimization multicast problem in WMNs with directional antennas is discussed. Directional transmissions can greatly reduce radio interference and increase spatial reuse. The interference with directional transmissions is defined for multicast algorithm design. Multicast routing found by the interference-aware algorithm tends to have fewer channel collisions. The research work presented in this dissertation concludes that (1) new and practical link and channel metrics are required for designing broadcast and multicast in MRMC WMNs; (2) a small number of radios is sufficient to significantly improve throughput of broadcast and multicast in WMNs; (3) the number of channels has more impact on almost all performance metrics, such as the throughput, the number of transmission, and interference, in WMNs

    Throughput optimization in MPR-capable multi-hop wireless networks

    Get PDF
    Recent advances in the physical layer have enabled the simultaneous reception of multiple packets by a node in wireless networks. This capability has the potential of improving the performance of multi-hop wireless networks by a logarithmic factor with respect to current technologies. However, to fully exploit multiple packet reception (MPR) capability, new routing and scheduling schemes must be designed. These schemes need to reformulate a historically underlying assumption in wireless networks which states that any concurrent transmission of two or more packets results in a collision and failure of all packet receptions. In this work, we present a generalized model for the throughput optimization problem in MPR-capable multi-hop wireless networks. The formulation incorporates not only the MPR protocol model to quantify interference, but also the multi-access channel. The former is related with the MAC and routing layers, and considers a packet as the unit of transmission. The latter accounts for the achievable capacity of links used by simultaneous packet transmissions. The problem is modeled as a joint routing and scheduling problem. The scheduling subproblem deals with finding the optimal schedulable sets, which are defined as subsets of links that can be scheduled or activated simultaneously. Among other results, we demonstrate that any solution of the scheduling subproblem can be built with |E| + 1 or fewer schedulable sets, where |E| is the number of links of the network. This result contrasts with a conjecture that states that a solution of the scheduling subproblem, in general, is composed of an exponential number of schedulable sets. The model can be applied to a wide range of networks, such as half and full duplex systems, networks with directional and omni-directional antennas with one or multiple transmit antennas per node. Due to the hardness of the problem, we propose several polynomial time schemes based on a combination of linear programming, approximation algorithm and greedy paradigms. We illustrate the use of the proposed schemes to study the impact of several design parameters such as decoding capability and number of transmit antennas on the performance of MPR-capable networks

    Cross-layer schemes for performance optimization in wireless networks

    Get PDF
    Wireless networks are undergoing rapid progress and inspiring numerous applications. As the application of wireless networks becomes broader, they are expected to not only provide ubiquitous connectivity, but also support end users with certain service guarantees. End-to-end delay is an important Quality of Service (QoS) metric in multihop wireless networks. This dissertation addresses how to minimize end-to-end delay through joint optimization of network layer routing and link layer scheduling. Two cross-layer schemes, a loosely coupled cross-layer scheme and a tightly coupled cross-layer scheme, are proposed. The two cross-layer schemes involve interference modeling in multihop wireless networks with omnidirectional antenna. In addition, based on the interference model, multicast schedules are optimized to minimize the total end-to-end delay. Throughput is another important QoS metric in wireless networks. This dissertation addresses how to leverage the spatial multiplexing function of MIMO links to improve wireless network throughput. Wireless interference modeling of a half-duplex MIMO node is presented. Based on the interference model, routing, spatial multiplexing, and scheduling are jointly considered in one optimization model. The throughput optimization problem is first addressed in constant bit rate networks and then in variable bit rate networks. In a variable data rate network, transmitters can use adaptive coding and modulation schemes to change their data rates so that the data rates are supported by the Signal to Noise and Interference Ratio (SINR). The problem of achieving maximum throughput in a millimeter-wave wireless personal area network is studied --Abstract, page iv

    On the performance of STDMA Link Scheduling and Switched Beamforming Antennas in Wireless Mesh Networks

    Get PDF
    Projecte final de carrera realitzat en col.laboració amb King's College LondonWireless Mesh Networks (WMNs) aim to revolutionize Internet connectivity due to its high throughput, cost-e ectiveness and ease deployment by providing last mile connectivity and/or backhaul support to di erent cellular networks. In order not to jeopardize their successful deployment, several key issues must be investigated and overcome to fully realize its potential. For WMNs that utilize Spatial Reuse TDMA as the medium access control, link scheduling still requires further enhancements. The rst main contribution of this thesis is a fast randomized parallel link swap based packing (RSP) algorithm for timeslot allocation in a spatial time division multiple access (STDMA) wireless mesh network. The proposed randomized algorithm extends several greedy scheduling algorithms that utilize the physical interference model by applying a local search that leads to a substantial improvement in the spatial timeslot reuse. Numerical simulations reveal that compared to previously scheduling schemes the proposed randomized algorithm can achieve a performance gain of up to 11%. A signi cant bene t of the proposed scheme is that the computations can be parallelized and therefore can e ciently utilize commoditized and emerging multi-core and/or multi-CPU processors. Furthermore, the use of selectable multi-beam directional antennas in WMNs, such as beam switched phase array antennas, can assist to signi cantly enhance the overall reuse of timeslots by reducing interference levels across the network and thereby increasing the spectral e ciency of the system. To perform though a switch on the antenna beam it may require up to 0.25 ms in practical deployed networks, while at the same time very frequent beam switchings can a ect frame acquisition and overall reliability of the deployed mesh network. The second key contribution of this thesis is a set of algorithms that minimize the overall number of required beam switchings in the mesh network without penalizing the spatial reuse of timeslots, i.e., keeping the same overall frame length in the network. Numerical investigations reveal that the proposed set of algorithms can reduce the number of beam switchings by almost 90% without a ecting the frame length of the network
    • …
    corecore