Integer-Forcing Source Coding

Integer-Forcing (IF) is a new framework, based on compute-and-forward, for decoding multiple integer linear combinations from the output of a Gaussian multiple-input multiple-output channel. This work applies the IF approach to arrive at a new low-complexity scheme, IF source coding, for distributed lossy compression of correlated Gaussian sources under a minimum mean squared error distortion measure. All encoders use the same nested lattice codebook. Each encoder quantizes its observation using the fine lattice as a quantizer and reduces the result modulo the coarse lattice, which plays the role of binning. Rather than directly recovering the individual quantized signals, the decoder first recovers a full-rank set of judiciously chosen integer linear combinations of the quantized signals, and then inverts it. In general, the linear combinations have smaller average powers than the original signals. This allows to increase the density of the coarse lattice, which in turn translates to smaller compression rates. We also propose and analyze a one-shot version of IF source coding, that is simple enough to potentially lead to a new design principle for analog-to-digital converters that can exploit spatial correlations between the sampled signals.Comment: Submitted to IEEE Transactions on Information Theor

Zero-delay source-channel coding

In this thesis, we investigate the zero-delay transmission of source samples over three different types of communication channel models. First, we consider the zero-delay transmission of a Gaussian source sample over an additive white Gaussian noise (AWGN) channel in the presence of an additive white Gaussian (AWG) interference, which is fully known by the transmitter. We propose three parameterized linear and non-linear transmission schemes for this scenario, and compare the corresponding mean square error (MSE) performances with that of a numerically optimized encoder, obtained using the necessary optimality conditions. Next, we consider the zero-delay transmission of a Gaussian source sample over an AWGN channel with a one-bit analog-to-digital (ADC) front end. We study this problem under two different performance criteria, namely the MSE distortion and the distortion outage probability (DOP), and obtain the optimal encoder and the decoder for both criteria. As generalizations of this scenario, we consider the performance with a K-level ADC front end as well as with multiple one-bit ADC front ends. We derive necessary conditions for the optimal encoder and decoder, which are then used to obtain numerically optimized encoder and decoder mappings. Finally, we consider the transmission of a Gaussian source sample over an AWGN channel with a one-bit ADC front end in the presence of correlated side information at the receiver. Again, we derive the necessary optimality conditions, and using these conditions obtain numerically optimized encoder and decoder mappings. We also consider the scenario in which the side information is available also at the encoder, and obtain the optimal encoder and decoder mappings. The performance of the latter scenario serves as a lower bound on the performance of the case in which the side information is available only at the decoder.Open Acces

Zero-Delay Source-Channel Coding With a Low-Resolution ADC Front End

Motivated by the practical constraints arising in emerging sensor network and Internet-of-Things (IoT) applications, the zero-delay transmission of a Gaussian measurement over a real single-input multiple-output (SIMO) additive white Gaussian noise (AWGN) channel is studied with a low-resolution analog-to-digital converter (ADC) front end. Joint optimization of the encoder and the decoder mapping is tackled under both the mean squared error (MSE) distortion and the distortion outage probability (DOP) criteria, with an average power constraint on the channel input. Optimal encoder and decoder mappings are identified for a one-bit ADC front end under both criteria. For the MSE distortion, the optimal encoder mapping is shown to be non-linear in general, while it tends to a linear encoder in the low signal-to-noise ratio (SNR) regime, and to an antipodal digital encoder in the high SNR regime. This is in contrast to the optimality of linear encoding at all SNR values in the presence of a full-precision front end. For the DOP criterion, it is shown that the optimal encoder mapping is piecewise constant and can take only two opposite values when it is non-zero. For both the MSE distortion and the DOP criteria, necessary optimality conditions are then derived for $K$ -level ADC front ends as well as front ends with multiple one-bit ADCs. These conditions are used to obtain numerically optimized solutions. Extensive numerical results are also provided in order to gain insights into the structure of the optimal encoding and decoding mappings

New Concept of PLC Modems: Multi-Carrier System for Frequency Selective Slow-Fading Channels Based on Layered SCCC Turbocodes

The article introduces a novel concept of a PLC modem as a complement to the existing G3 and PRIME standards for communications using medium- or high-voltage overhead or cable lines. The proposed concept is based on the fact that the levels of impulse noise and frequency selectivity are lower on high-voltage lines than on low-voltage ones. Also, the demands for “cost-effective” circuitry design are not so crucial as in the case of modems for low-voltage level. In contract to these positive conditions, however, there is the need to overcome much longer distances and to take into account low SNR on the receiving side. With respect to the listed reasons, our concept makes use of MCM, instead of OFDM. The assumption of low SNR is compensated through the use of an efficient channel coding based on a serially concatenated turbo code. In addition, MCM offers lower latency and PAPR compared to OFDM. Therefore, when using MCM, it is possible to excite the line with higher power. The proposed concept has been verified during experimental transmission of testing data over a real, 5 km long, 22kV overhead line

Reconfigurable Radio System Test bed for security research

Technological progress on the digital processing has opened the way to a novel implementation approach for wireless communication platforms where most of the digital signal processing is done in software rather than in hardware. Such systems have been known as Software Defined Radio (SDR) or Reconfigurable Radio Systems (RRS). A typical SDR/RRS is able to execute all the radio frequency and base-band processing though software components rather then hardware components as in conventional radio communication systems. This capability provides a high level of reconfigurability and the possibility to implement a number of different algorithms for digital processing. Therefore, SDR/RRS can be used for a variety or purposes including the possibility of implementing wireless security attacks against conventional communication systems. In this technical report, we present an application of the SDR/RRS platform to implement a security attack against a DECT platform. The SDR/RRS platform has been used to implement a DECT demodulator and a processing module to eavesdrop and capture user and control data transmitted by a DECT system. The commercially available Universal Software Radio Peripheral (USRP) has been used as SDR/RRS platform for the development of the prototype. The paper presents the technical challenges and implementation details in the development of the prototype and an overview of the capabilities of the USRP to implement wireless security attacks. The SDR/RRS platform used in the project is quite versatile and it can be used for a number of other applications related to DECT or other wireless communication systems.JRC.G.6-Security technology assessmen

An ECG-on-Chip with QRS Detection & Lossless Compression for Low Power Wireless Sensors

IEEE Transactions on Circuits and Systems II: Express BriefsPP991-