Trellis- and network-coded modulation for decode-and-forward two-way relaying over time-varying channels

We present a bandwidth-efficient joint channel coding-modulation scheme conceived for the broadcast channel (BC) of Decode-and-forward Two-way Relaying (DF-TWR), where Trellis-coded modulation (TCM) is intrinsically amalgamated with network-coded modulation (NCM) for achieving both a channel coding gain and a high throughput. We conceive a low-complexity receiver algorithm for our joint Trellis- and Network-coded modulation (TC-NCM) scheme, which applies decoding and demodulation simultaneously, without the need to first demodulate the signal before decoding, as in the traditional solutions. As a further contribution, the TC-NCM scheme is intrinsically amalgamated with adaptive transceiver techniques. We then further investigate the performance of our near-instantaneously adaptive discrete-rate TC-NC-QAM/PSK scheme. Both simulation results and numerical analysis are presented, which are compared to the performance of traditional NCM schemes. The results show that our scheme not only increases the achievable transmission rate, but also improves the reliability, yet it is of modest complexity

Truncated-ARQ aided adaptive network coding for cooperative two-way relaying networks: cross-layer design and analysis

Network Coding (NC) constitutes a promising technique of improving the throughput of relay-aided networks. In this context, we propose a cross-layer design for both amplifyand- forward (AF-) and decode-and-forward two-way relaying (DF-TWR) based on the NC technique invoked for improving the achievable throughput under specific Quality of Service (QoS) requirements, such as the maximum affordable delay and error rate.We intrinsically amalgamate adaptive Analog Network Coding (ANC) and Network Coded Modulation (NCM) with truncated Automatic Repeat reQuest (ARQ) operating at the different OSI layers. At the data-link layer, we design a pair of improved NC-based ARQ strategies based on the Stop-andwait and the Selective-repeat ARQ protocols. At the physical layer, adaptive ANC/NCM are invoked based on our approximate packet error ratio (PER). We demonstrate that the adaptive ANC design can be readily amalgamated with the proposed protocols. However, adaptive NC-QAM suffers from an SNR-loss, when the transmit rates of the pair of downlink (DL) channels spanning from the relay to the pair of destinations are different. Therefore we develop a novel transmission strategy for jointly selecting the optimal constellation sizes for both of the relay-to-destination links that have to be adapted to both pair of channel conditions. Finally, we analyze the attainable throughput, demonstrating that our truncated ARQ-aided adaptive ANC/NCM schemes attain considerable throughput gains over the schemes dispensing with ARQ, whilst our proposed scheme is capable of supporting bidirectional NC scenarios

Variable-Rate, Variable-Power Network-Coded-QAM/PSK for Bi-Directional Relaying Over Fading Channels

Network coded modulation (NCM) holds the promise of significantly improving the efficiency of two-way wireless relaying. In this contribution, we propose near instantaneously adaptive variable-rate, variable-power QAM/PSK for NC-aided decode-and-forward two-way relaying (DF-TWR) to maximize the average throughput. The proposed scheme is optimized subject to both average-power and bit-error-ratio (BER) constraints. Based on the BER bounds, we investigate a discrete-rate adaptation scheme, relying on a pair of solutions proposed for maximizing the spectral efficiency of the network. We then derive a closed-form solution based power adaptation policy for a continuous-rate scheme and quantify the signal-to-noise ratio (SNR) loss imposed by NC-QAM. Our simulation results demonstrate that the proposed discrete adaptive NC-QAM/PSK schemes are capable of attaining a higher spectral efficiency than their fixed-power counterparts

Variable-rate, variable-power network-coded-QAM/PSK for bi-directional relaying over fading channels

Network coded modulation (NCM) holds the promise of significantly improving the efficiency of two-way wireless relaying. In this contribution, we propose near instantaneously adaptive variable-rate, variable-power QAM/PSK for NC-aided decode-and-forward two-way relaying (DF-TWR) to maximize the average throughput. The proposed scheme is optimized subject to both average-power and bit-error-ratio (BER) constraints. Based on the BER bounds, we investigate a discrete-rate adaptation scheme, relying on a pair of solutions proposed for maximizing the spectral efficiency of the network. We then derive a closed-form solution based power adaptation policy for a continuous-rate scheme and quantify the signal-to-noise ratio (SNR) loss imposed by NC-QAM. Our simulation results demonstrate that the proposed discrete adaptive NC-QAM/PSK schemes are capable of attaining a higher spectral efficiency than their fixed-power counterparts

Self-concatenated coding for wireless communication systems

In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput

Spatial Modulation for Generalized MIMO:Challenges, Opportunities, and Implementation

A key challenge of future mobile communication research is to strike an attractive compromise between wireless network's area spectral efficiency and energy efficiency. This necessitates a clean-slate approach to wireless system design, embracing the rich body of existing knowledge, especially on multiple-input-multiple-output (MIMO) technologies. This motivates the proposal of an emerging wireless communications concept conceived for single-radio-frequency (RF) large-scale MIMO communications, which is termed as SM. The concept of SM has established itself as a beneficial transmission paradigm, subsuming numerous members of the MIMO system family. The research of SM has reached sufficient maturity to motivate its comparison to state-of-the-art MIMO communications, as well as to inspire its application to other emerging wireless systems such as relay-aided, cooperative, small-cell, optical wireless, and power-efficient communications. Furthermore, it has received sufficient research attention to be implemented in testbeds, and it holds the promise of stimulating further vigorous interdisciplinary research in the years to come. This tutorial paper is intended to offer a comprehensive state-of-the-art survey on SM-MIMO research, to provide a critical appraisal of its potential advantages, and to promote the discussion of its beneficial application areas and their research challenges leading to the analysis of the technological issues associated with the implementation of SM-MIMO. The paper is concluded with the description of the world's first experimental activities in this vibrant research field