19 research outputs found
Multiple Access Techniques for Next Generation Wireless: Recent Advances and Future Perspectives
The advances in multiple access techniques has been one of the key drivers in moving from one cellular generation to another. Starting from the first generation, several multiple access techniques have been explored in different generations and various emerging multiplexing/multiple access techniques are being investigated for the next generation of cellular networks. In this context, this paper first provides a detailed review on the existing Space Division Multiple Access (SDMA) related works. Subsequently, it highlights the main features and the drawbacks of various existing and emerging multiplexing/multiple access techniques. Finally, we propose a novel concept of clustered orthogonal signature division multiple access for the next generation of cellular networks. The proposed concept envisions to employ joint antenna coding in order to enhance the orthogonality of SDMA beams with the objective of enhancing the spectral efficiency of future cellular networks
Nonorthogonal Multiple Access for 5G and Beyond
This work was
supported in part by the U.K. Engineering and Physical Sciences Research Council
(EPSRC) under Grant EP/N029720/1 and Grant EP/N029720/2. The work of
L. Hanzo was supported by the ERC Advanced Fellow Grant Beam-me-up
Rate adaptive resource allocation with fairness control for OFDMA networks
The use of opportunistic radio resource allocation techniques in order to efficiently manage the resources generates
a low fairness among the users in a cellular system due to uneven Quality of Service (QoS) distribution. Some classic rate adaptive policies tried to tackle this problem for OFDMA systems by
proposing solutions to maximize capacity, maximize fairness, or find a static trade-off between these two objectives. This
work generalizes these classic policies and propose a dynamic fairness/rate adaptive technique based on dynamic sub-carrier
assignment and equal power allocation that considers a new fairness constraint in the optimization problem. By means of
extensive system-level simulations, it is demonstrated that the
proposed technique is able to provide an instantaneous (short-term) fairness control, which provides to the network operator
the flexibility to operate on any desired trade-off point.Peer ReviewedPostprint (published version
Spectrum Sharing, Latency, and Security in 5G Networks with Application to IoT and Smart Grid
The surge of mobile devices, such as smartphones, and tables, demands additional capacity. On the other hand, Internet-of-Things (IoT) and smart grid, which connects numerous sensors, devices, and machines require ubiquitous connectivity and data security. Additionally, some use cases, such as automated manufacturing process, automated transportation, and smart grid, require latency as low as 1 ms, and reliability as high as 99.99\%. To enhance throughput and support massive connectivity, sharing of the unlicensed spectrum (3.5 GHz, 5GHz, and mmWave) is a potential solution. On the other hand, to address the latency, drastic changes in the network architecture is required. The fifth generation (5G) cellular networks will embrace the spectrum sharing and network architecture modifications to address the throughput enhancement, massive connectivity, and low latency.
To utilize the unlicensed spectrum, we propose a fixed duty cycle based coexistence of LTE and WiFi, in which the duty cycle of LTE transmission can be adjusted based on the amount of data. In the second approach, a multi-arm bandit learning based coexistence of LTE and WiFi has been developed. The duty cycle of transmission and downlink power are adapted through the exploration and exploitation. This approach improves the aggregated capacity by 33\%, along with cell edge and energy efficiency enhancement. We also investigate the performance of LTE and ZigBee coexistence using smart grid as a scenario.
In case of low latency, we summarize the existing works into three domains in the context of 5G networks: core, radio and caching networks. Along with this, fundamental constraints for achieving low latency are identified followed by a general overview of exemplary 5G networks. Besides that, a loop-free, low latency and local-decision based routing protocol is derived in the context of smart grid. This approach ensures low latency and reliable data communication for stationary devices.
To address data security in wireless communication, we introduce a geo-location based data encryption, along with node authentication by k-nearest neighbor algorithm. In the second approach, node authentication by the support vector machine, along with public-private key management, is proposed. Both approaches ensure data security without increasing the packet overhead compared to the existing approaches
Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology
L'abstract è presente nell'allegato / the abstract is in the attachmen
On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds
Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed
Doppler compensation algorithms for DSP-based implementation of OFDM underwater acoustic communication systems
In recent years, orthogonal frequency division multiplexing (OFDM) has gained considerable attention in the development of underwater communication (UWC) systems for civilian and military applications. However, the wideband nature of the communication links necessitate robust algorithms to combat the consequences of severe channel conditions such as frequency selectivity, ambient noise, severe multipath and Doppler Effect due to velocity change between the transmitter and receiver. This velocity perturbation comprises two scenarios; the first induces constant time scale expansion/compression or zero acceleration during the transmitted packet time, and the second is time varying Doppler-shift. The latter is an increasingly important area in autonomous underwater vehicle (AUV) applications. The aim of this thesis is to design a low complexity OFDM-based receiver structure for underwater communication that tackles the inherent Doppler effect and is applicable for developing real-time systems on a digital signal processor (DSP). The proposed structure presents a paradigm in modem design from previous generations of single carrier receivers employing computationally expensive equalizers. The thesis demonstrates the issues related to designing a practical OFDM system, such as channel coding and peak-to-average power ratio (PAPR). In channel coding, the proposed algorithms employ convolutional bit-interleaved coded modulation with iterative decoding (BICM-ID) to obtain a higher degree of protection against power fading caused by the channel. A novel receiver structure that combines an adaptive Doppler-shift correction and BICM-ID for multi-carrier systems is presented. In addition, the selective mapping (SLM) technique has been utilized for PAPR. Due to their time varying and frequency selective channel nature, the proposed systems are investigated via both laboratory simulations and experiments conducted in the North Sea off the UK’s North East coast. The results of the study show that the proposed systems outperform block-based Doppler-shift compensation and are capable of tracking the Doppler-shift at acceleration up to 1m /s2.EThOS - Electronic Theses Online ServiceIraqi Government's Ministry of Higher Education and Scientific ResearchGBUnited Kingdo
Multiuser non coherent massive MIMO schemes based on DPSK for future communication systems
The explosive usage of rich multimedia content in wireless devices has overloaded the
communication networks. Moreover, the fifth generation (5G) of wireless communications
involves new requirements in the radio access network (RAN) which require higher network
capacities and new capabilities such as ultra-reliable and low-latency communication
(URLLC), vehicular communications or augmented reality. All this has encouraged a remarkable
spectrum crisis in the RF bands. A need for searching alternative techniques
with more spectral efficiency to accommodate the needs of future emerging wireless communications
is emerging. In this context, massive MIMO (m-MIMO) systems have been
proposed as a promising solution for providing a substantial increase in the network capacity,
becoming one of the key enabling technologies for 5G and beyond. m-MIMO
provides high spectral- and energy-efficiency thanks to the deployment of a large number
of antennas at the BS. However, we have to take into account that the current communication
technologies are based on coherent transmission techniques so far, which require
the transmission of a huge amount of signaling. This drawback is escalating with the
excessive available number of antennas in m-MIMO. Therefore, the differential encoding
and non coherent (NC) detection are an alternative solution to circumvent the drawbacks
of m-MIMO in coherent systems. This Ph.D. Thesis is focused on signal processing
techniques for NC detection in conjunction with m-MIMO, proposing new constellation
designs and NC detection algorithms, where the information is transmitted in the signal
differential phase.
First, we design new constellation schemes for an uplink multiuser NC m-MIMO system
in Rayleigh fading channels. These designs allow us to separate the users' signals
at the receiver thanks to a one-to-one correspondence between the constellation for each
user and the received joint constellation. Two approaches are considered in terms of BER:
each user achieves a different performance and, on the other hand, the same performance
is provided for all users. We analyze the number of antennas needed for those designs
and compare to the required number by other designs in the literature. It is shown that
our designs based on DPSK require a lower number of antennas than that required by
their counterpart schemes based on energy. In addition, we compare the performance to
their coherent counterpart systems, resulting NC-m-MIMO based on DPSK capable of
outperforming the coherent systems with the suitable designs.
Second, in order to reduce the number of antennas required for a target performance
we propose a multi-user bit interleaved coded modulation - iterative decoding (BICM-ID) scheme as channel coding for a NC-m-MIMO system based on DPSK. We propose a novel
NC approach for calculating EXIT curves based on the number of antennas. Then using
the EXIT chart we find the best channel coding scheme for our NC-m-MIMO proposal.
We show that the number of users served by the BS can be increased with a 70% reduction
in the number of antennas with respect to the case without channel coding. In particular,
we show that with 100 antennas for error protection equal design for all users and a coding
rate of 1/2 we achieve the minimum probability of error.
Third, we consider that current scenarios such as backhaul wireless systems, rural
or suburban environments, and even new device-to-device (D2D) communications or the
communications in higher frequencies (millimeter and the emerging ones in terahertz frequencies)
can have a predominant line-of-sight (LOS) component, modeled by Rician
fading. For all these new possible scenarios in 5G, we analyze the behavior of the NC
m-MIMO systems when we have a Rician fading. We present a new constellation design
to overcome the problem of the LOS channel component, as well as an associated detection
algorithm to separate each user in reception taking into account the characterization
of the constellation. In addition, for contemplating a more realistic scenario, we propose
grouping users which experience a Rayleigh fading with those with Rician fading, analyzing
the SINR and the performance of such combination in a multi-user NC m-MIMO
system based on M-DPSK. The adequate user grouping allows unifying the constellation
for both groups of users and the detection algorithm, reducing the complexity of the
receiver. Also, the number of users that may be multiplexed may be further increased
thanks to the improved performance.
In the fourth part of this Thesis, we analyse the performance of multi-user NC m-
MIMO based on DPSK in real environments and practical channels defined for the current
standards such as LTE, the future technologies such as 5G and even for communications
in the terahertz band. For this purpose, we use a metric to model the time-varying characteristics
of the practical channels. We employ again the EXIT charts tool for analyzing
and designing iteratively decoded systems. This analysis allows us to obtain an estimate
of the degradation of the system's performance imposed by realistic channels. Hence, we
show that our proposed system is robust to temporal variations, thus it is more recommendable
the employment of NC-m-MIMO-DPSK in the future communication standards
such as 5G. In order to reduce he number of hardware resources required in terms of RF
chains, facilitating its implementation in a real system, we propose incorporating differential
spatial modulation (DSM). We present and analyze a novel multiuser scheme for
NC-m-MIMO combined with DSM with which we can see that the number of antennas
is not a
affected by the incorporation of DSM, even we have an improvement on the
performance with respect to the coherent case.
Finally, we study the viability of multiplexing users by constellation schemes against
classical multiplexing techniques such as time division multiple access (TDMA). In order
to fully characterize the system performance we analyze the block error rate (BLER)
and the throughput of a NC-m-MIMO system. The results show a significant advantage
regarding the number of antennas for multiplexing in the constellation against TDMA.
However, in some cases, the demodulation of multiple users in constellation could require
an excessively large number of antennas compared to TDMA. Therefore, it is necessary to
properly manage the tradeoff
between throughout and the number of antennas, to reach
an optimal operational point, as shown in this Thesis.El inmenso uso de contenido multimedia en los dispositivos inalámbricos ha sobrecargado
las redes de comunicaciones. Además, la quinta generación (5G) de sistemas de
comunicaciones demanda nuevos requisitos para la red de acceso radio, la cual requiere
ofrecer capacidades de red mayores y nuevas funcionalidades como comunicaciones ultra
fiables y con muy poca letancia (URLLC), comunicaciones vehiculares o aplicaciones
como la realidad aumentada. Todo esto ha propiciado una crisis notable en el espectro
electromagnético, lo que ha llevado a una necesidad por buscar técnicas alternativas con
más eficiencia espectral para acomodar todos los requisitos de las tecnologÃas de comunicaciones
emergentes y futuras. En este contexto, los sistemas multi antena masivos,
conocidos como massive MIMO, m-MIMO, han sido propuestos como una solución prometedora
que proporciona un incremento substancial de la capacidad de red, convirtiéndose
en una de las tecnologÃas claves para el 5G. Los sistemas m-MIMO elevan enormemente el
número de antenas en la estación base, lo que les permite ofrecer alta eficiencia espectral
y energética. No obstante, tenemos que tener en cuenta que las actuales tecnologÃas de comunicaciones
emplean técnicas coherentes, las cuales requieren de información del estado
del canal y por ello la transmisión de una enorme cantidad de información de señalización.
Este inconveniente se ve agravado en el caso del m-MIMO debido al enorme número de
antenas. Por ello, la codificación diferencial y la detección no coherente (NC) son una
solución alternativa para solventar el problema de m-MIMO en los sistemas coherentes.
Esta Tesis se centra en las técnicas de procesado de señal para detección NC junto con
m-MIMO, proponiendo nuevos esquemas de constelación y algoritmos de detección NC,
donde la información sea transmitida en la diferencia de fase de la señal.
Primero, diseñamos nuevas constelaciones para un sistema multi usuario NC en m-
MIMO en enlace ascendente (uplink) en canales con desvanecimiento tipo Rayleigh. Estos
diseños nos permiten separar las señales de los usuarios en el receptor gracias a la correspondencia
unÃvoca entre la constelación de cada usuario individual y la constelación
conjunta recibida en la estación base. Hemos considerado dos enfoques para el diseño en
términos de probabilidad de error: cada usuario consigue un rendimiento distinto, mientras
que por otro lado, todos los usuarios son capaces de recibir las mismas prestaciones
de probabilidad de error. Analizamos el número de antenas necesario para estos diseños y
comparamos con el número requerido por otros diseños propuestos en la literatura. Nuestro
diseño basado en DPSK requiere un número menor de antenas comparado con los
sistemas basados en detección de energÃa. También comparamos con su homólogo coherente, resultando que NC-m-MIMO basado en DPSK es capaz de superar a los sistemas
coherentes con los diseños adecuados.
En segundo lugar, para reducir el número de antenas requerido para un rendimiento
dado, proponemos incluir un esquema de codificación de canal. Hemos optado por un
esquema de modulación codificado por bit entrelazado y decodificación iterativa (BICMID).
Hemos empleado la herramienta EXIT chart para el diseño de la codificación de canal,
proponiendo un nuevo enfoque para calcular las curvas EXIT de forma NC y basadas en
el número de antenas. Los resultados muestran que el número de usuarios servidos por
la estación base puede ser incrementado reduciendo un 70% el número de antenas con
respecto al caso sin codificación de canal. En particular, para un array de 100 antenas
y un diseño que ofrezca iguales prestaciones a todos los usuarios, con un código de tasa
1=2, podemos conseguir la mÃnima probabilidad de error.
En tercer lugar, consideramos escenarios donde el canal tenga una componente predominante
de visión directa (LOS) con la estación base modelada mediante un desvanecimiento
tipo Rician. Por ejemplo, sistemas inalámbricos de backhaul, entornos rurales
o sub urbanos, comunicaciones entre dispositivos (D2D), también cuando nos movemos
hacia frecuencias superiores como son en la banda de milimétricas o más recientemente,
la banda de terahercios para buscar mayores anchos de banda. Todos estos escenarios
están contemplados en el futuro 5G. Los diseños presentados para canales Rayleigh ya no
son válidos debido a la componente LOS del canal, por ello presentamos un nuevo diseño de constelación que resuelve el problema de la componente LOS, asà como una guÃa para
diseñar nuevas constelaciones. También proponemos un algoritmo asociado al diseñno de
la constelación para poder separar a los usuarios en recepción. Además, para contemplar
un escenario más realista donde podamos encontrar tanto desvanecimiento Rayleigh como
Rice, proponemos agrupar usuarios de ambos grupos, analizando su rendimiento y relación
señal a interferencia en la combinación. El adecuado agrupamiento permite unificar el
diseño de la constelación para ambos desvanecimientos y por tanto reducir la complejidad
en el receptor. También, el número de usuarios multiplicados en la constelación podrÃa
ser incrementado, gracias a la mejora en el rendimiento.
El cuarto módulo de esta tesis es dedicado a analizar el rendimiento de los diseños
propuestos en presencia de canales reales, donde disponemos de variabilidad temporal y en
frecuencia. Proponemos usar una métrica que modela las caracterÃsticas de la variabilidad
temporal y, usando de nuevo la herramienta EXIT, analizamos los sistemas decodificados
iterativamente considerando ahora los parámetros prácticos del canal. Este análisis nos
permite obtener una estimación de la degradación que sufre el rendimiento del sistema
impuesto por canales reales. Los resultados muestran que los sistemas NC-m-MIMO basados
en DPSK son muy robustos a la variabilidad temporal por lo que son recomendables
para los nuevos escenarios propuestos por el 5G, donde el canal cambia rápidamente.
Otra consideración para introducir los sistemas NC con m-MIMO es la problemática
de necesitar muchas cadenas de radio frecuencia que llevarÃan a tamaños de dispositivos
enormes. Para reducir este número se propone la modulación espacial. En esta Tesis,
estudiamos su uso con los sistemas NC, proponiendo una solución de modulación espacial
diferencial para esquemas con múltiples usuarios combinado con NC-m-MIMO.
Finalmente, estudiamos la viabilidad de multiplexar usuarios en la constelación frente
a usar técnicas clásicas de multiplexación como TDMA. Para caracterizar completamente
el rendimiento del sistema, analizamos la tasa de error de bloque (BLER) y el throughput
de un sistema NC-m-MIMO. Los resultados muestran una ventaja significativa en cuanto
al número de antennas para multiplexar usuarios en la constelación frente al requerido
por TDMA. No obstante, en algunos casos, la demodulación de múltiples usuarios en
la constelación podrÃa requerir un número de antennas excesivamente grande comparado
con la multiplexación en el tiempo. Por ello, es necesario gestionar adecuadamente un
balance entre el throughput y el número de antenas para alcanzar un punto operacional
óptimo, como se muestra en esta Tesis.Programa Oficial de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Ana Isabel Pérez Neira.- Secretario: Máximo Morales Céspedes.- Vocal: MarÃa del Carmen Aguayo Torre