Energy Efficiency Optimization for a Multiuser IRS-aided MISO System with SWIPT

Combining simultaneous wireless information and power transfer (SWIPT) and an intelligent reflecting surface (IRS) is a feasible scheme to enhance energy efficiency (EE) performance. In this paper, we investigate a multiuser IRS-aided multiple-input single-output (MISO) system with SWIPT. For the purpose of maximizing the EE of the system, we jointly optimize the base station (BS) transmit beamforming vectors, the IRS reflective beamforming vector, and the power splitting (PS) ratios, while considering the maximum transmit power budget, the IRS reflection constraints, and the quality of service (QoS) requirements containing the minimum data rate and the minimum harvested energy of each user. The formulated EE maximization problem is non-convex and extremely complex. To tackle it, we develop an efficient alternating optimization (AO) algorithm by decoupling the original nonconvex problem into three subproblems, which are solved iteratively by using the Dinkelbach method. In particular, we apply the successive convex approximation (SCA) as well as the semi-definite relaxation (SDR) techniques to solve the non-convex transmit beamforming and reflective beamforming optimization subproblems. Simulation results verify the effectiveness of the AO algorithm as well as the benefit of deploying IRS for enhancing the EE performance compared with the benchmark schemes

Energy-Efficient Resource Allocation for IRS-aided MISO System with SWIPT

Combining simultaneous wireless information and power transfer (SWIPT) and intelligent reflecting surface (IRS) is a feasible scheme to enhance the energy efficiency (EE) performance. In this paper, we investigate a multiuser IRS-aided multiple-input single-output (MISO) system with SWIPT. For the purpose of maximizing the EE of the system, we jointly optimize the base station (BS) transmit beamforming vectors, the IRS reflective beamforming vector and the power splitting (PS) ratios, while considering the maximum transmit power budget, the IRS reflection constraints and the quality of service (QoS) requirements containing the minimum data rate and the minimum harvested energy per user. As the proposed EE maximization problem is non-convex and extremely complex, we propose an efficient alternating optimization (AO) algorithm by decoupling the original problem into three subproblems which are tackled iteratively by using the Dinkelbach method. In particular, we apply the successive convex approximation (SCA) as well as the semi-definite relaxation (SDR) techniques to solve the non-convex transmit beamforming and reflective beamforming optimization subproblems. Numerical results confirm the effectiveness of the AO algorithm as well as the benefit of deploying IRS for enhancing the EE performance compared with the benchmark schemes

IRS-Aided SWIPT: Joint Waveform, Active and Passive Beamforming Design Under Nonlinear Harvester Model

The performance of Simultaneous Wireless Information and Power Transfer (SWIPT) is mainly constrained by the received Radio-Frequency (RF) signal strength. To tackle this problem, we introduce an Intelligent Reflecting Surface (IRS) to compensate the propagation loss and boost the transmission efficiency. This paper proposes a novel IRS-aided SWIPT system where a multi-carrier multi-antenna Access Point (AP) transmits information and power simultaneously, with the assist of an IRS, to a single-antenna User Equipment (UE) employing practical receiving schemes. Considering harvester nonlinearity, we characterize the achievable Rate-Energy (R-E) region through a joint optimization of waveform, active and passive beamforming based on the Channel State Information at the Transmitter (CSIT). This problem is solved by the Block Coordinate Descent (BCD) method, where we obtain the active precoder in closed form, the passive beamforming by the Successive Convex Approximation (SCA) approach, and the waveform amplitude by the Geometric Programming (GP) technique. To facilitate practical implementation, we also propose a low-complexity design based on closed-form adaptive waveform schemes. Simulation results demonstrate the proposed algorithms bring considerable R-E gains with robustness to CSIT inaccuracy and finite IRS states, and emphasize the importance of modeling harvester nonlinearity in the IRS-aided SWIPT design.Comment: Source code available at https://github.com/SnowzTail/irs-aided-swipt-joint-waveform-active-and-passive-beamforming-design-under-nonlinear-harvester-mode