Cross-layer schemes for performance optimization in wireless networks

Wireless networks are undergoing rapid progress and inspiring numerous applications. As the application of wireless networks becomes broader, they are expected to not only provide ubiquitous connectivity, but also support end users with certain service guarantees. End-to-end delay is an important Quality of Service (QoS) metric in multihop wireless networks. This dissertation addresses how to minimize end-to-end delay through joint optimization of network layer routing and link layer scheduling. Two cross-layer schemes, a loosely coupled cross-layer scheme and a tightly coupled cross-layer scheme, are proposed. The two cross-layer schemes involve interference modeling in multihop wireless networks with omnidirectional antenna. In addition, based on the interference model, multicast schedules are optimized to minimize the total end-to-end delay. Throughput is another important QoS metric in wireless networks. This dissertation addresses how to leverage the spatial multiplexing function of MIMO links to improve wireless network throughput. Wireless interference modeling of a half-duplex MIMO node is presented. Based on the interference model, routing, spatial multiplexing, and scheduling are jointly considered in one optimization model. The throughput optimization problem is first addressed in constant bit rate networks and then in variable bit rate networks. In a variable data rate network, transmitters can use adaptive coding and modulation schemes to change their data rates so that the data rates are supported by the Signal to Noise and Interference Ratio (SINR). The problem of achieving maximum throughput in a millimeter-wave wireless personal area network is studied --Abstract, page iv

Data Collection in Two-Tier IoT Networks with Radio Frequency (RF) Energy Harvesting Devices and Tags

The Internet of things (IoT) is expected to connect physical objects and end-users using technologies such as wireless sensor networks and radio frequency identification (RFID). In addition, it will employ a wireless multi-hop backhaul to transfer data collected by a myriad of devices to users or applications such as digital twins operating in a Metaverse. A critical issue is that the number of packets collected and transferred to the Internet is bounded by limited network resources such as bandwidth and energy. In this respect, IoT networks have adopted technologies such as time division multiple access (TDMA), signal interference cancellation (SIC) and multiple-input multiple-output (MIMO) in order to increase network capacity. Another fundamental issue is energy. To this end, researchers have exploited radio frequency (RF) energy-harvesting technologies to prolong the lifetime of energy constrained sensors and smart devices. Specifically, devices with RF energy harvesting capabilities can rely on ambient RF sources such as access points, television towers, and base stations. Further, an operator may deploy dedicated power beacons that serve as RF-energy sources. Apart from that, in order to reduce energy consumption, devices can adopt ambient backscattering communication technologies. Advantageously, backscattering allows devices to communicate using negligible amount of energy by modulating ambient RF signals. To address the aforementioned issues, this thesis first considers data collection in a two-tier MIMO ambient RF energy-harvesting network. The first tier consists of routers with MIMO capability and a set of source-destination pairs/flows. The second tier consists of energy harvesting devices that rely on RF transmissions from routers for energy supply. The problem is to determine a minimum-length TDMA link schedule that satisfies the traffic demand of source-destination pairs and energy demand of energy harvesting devices. It formulates the problem as a linear program (LP), and outlines a heuristic to construct transmission sets that are then used by the said LP. In addition, it outlines a new routing metric that considers the energy demand of energy harvesting devices to cope with routing requirements of IoT networks. The simulation results show that the proposed algorithm on average achieves 31.25% shorter schedules as compared to competing schemes. In addition, the said routing metric results in link schedules that are at most 24.75% longer than those computed by the LP

Cooperative strategies design based on the diversity and multiplexing tradeoff

This thesis focuses on designing wireless cooperative communication strategies that are either optimal or near-optimal in terms of the tradeoff between diversity and multiplexing gains. Starting from classical cooperative broadcast, multiple-access and relay channels with unit degree of freedom, to more general cooperative interference channels with higher degrees of freedom, properties of different network topologies are studied and their unique characteristics together with several advanced interference management techniques are exploited to design cooperative transmission strategies in order to enhance data rate, reliability or both at the same time. Moreover, various algorithms are proposed to solve practical implementation issues and performance is analyzed through both theoretical verifications and simulations

A Transmission Scheduling Protocol Using Radios With Multiple Antennas For Ad Hoc Networks

Distributed medium access control (MAC) protocols are essential due to the flexible and self-organizing nature of ad hoc networks. Scheduling protocols have been popular choices, because they guarantee access to the channel for each transceiver. The disadvantage with these scheduled approaches is that they are inefficient when the network has low traffic loads. Consider a time-division multiple access (TDMA) schedule where nodes are assigned time slots in which they are allowed to transmit. If a particular node is scheduled but has no traffic to forward, then the time slot is wasted. Because the channel has been reserved for use by that particular node, other nodes in the network with traffic to forward are unable to do so. We investigate strategies to improve the performance of TDMA scheduling protocols for ad hoc networks using radios with multiple antennas. Multiple antennas at each radio enables the use of a physical layer technique known as multiple-input multiple-output (MIMO) that leverages the spatial dimension. The antennas allow for both spatial multiplexing and interference cancellation. Spatial multiplexing allows for multiple parallel data streams to be transmitted at the same time. Interference cancellation is used to selectively pick neighbors that do not receive interference from a transmission. Our protocol uses both techniques to allow unscheduled nodes to transmit if the slot is not fully utilized. Using a custom simulation, we show that Lyui\u27s scheduling protocol can be extended to support MIMO and time slot sharing. Our new protocol provides performance improvements with regards to end-to-end completion, throughput, and average delay

On the throughput of in-band full-duplex communication in wireless systems

Proliferation of mobile devices and explosion in data intensive applications have led to serious spectrum crunch and stimulated the pursuit of new wireless communication techniques to utilize the scarce wireless spectrum assets more e ciently. As one of the promising technologies considered for next generation wireless communications, in-band full-duplex has been shown to have a great potential to alleviate this problem due to doubled spectral e ciency. Unlike half-duplex radios, which need to transmit and receive at di erent times, or out-of-band full-duplex radios, which devote di erent frequency bands to transmission and reception, in-band full-duplex radios are capable of simultaneously transmitting, while receiving over the same frequency band at the cost of self-interference that results. In this thesis, via extensively conducted experiments, we compare the performance of in-band full-duplex with that of half-duplex in fundamental communication scenarios such as two way communication, one way two hop communication and two way two hop communication, clearly identifying the conditions under which inband full-duplex outperforms half-duplex. Next, we extend our study to evaluate in-band full-duplex in multihop wireless networks, considering a linear topology. We obtain closed form analytical expressions for optimum transmission power policy in the two hop case and a linear programming and binary search based solution for the multihop case to compute the optimal transmission power levels. Our in-band full-duplex solution which takes into account full-interference is shown to outperform half-duplex transmission by a factor of 2.77 at low transmission power level, and by a factor of 1.81 at high transmission power level. We also incorporate our power solution with routing algorithms for adhoc networks. We compare the end-to-end throughput performance of the proposed joint routing & power allocation solution to that of half-duplex, direct transmission and an existing one-hop interference based in-band full-duplex transmission strategy. Our numerical experiments considering practical, low power systems such as femto cells and Zigbee show that proposed joint routing & power control mechanism provides 30% throughput improvement, relative to the existing in-band full-duplex solution with one hop interference, while it o ers ve times throughput, relative to halfduplex transmission even for moderate (80dB) SI cancellation levels

Project Final Report – FREEDOM ICT-248891

This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.This document is the final publishable summary report of the objective and work carried out within the European Project FREEDOM, ICT-248891.Preprin

Achieving Scalable Capacity in Wireless Mesh Networks

Wireless mesh networks play a critical role in enabling key networking scenarios in beyond-5G (B5G) and 6G networks, including integrated access and backhaul (IAB), multi-hop sidelinks, and V2X. However, it still poses a challenge to deliver scalable per-node throughput via mesh networking, which significantly limits the potential of large-scale deployment of wireless mesh networks. Existing research has achieved $O(1)$ per-node throughput in a dense network, but how to achieve scalability remains an unresolved issue for an extended wireless network where the network size increases with a constant node density. This issue prevents a wireless mesh network from large-scale deployment. To this end, this paper aims to develop a theoretical approach to achieving scalable per-node throughput in wireless mesh networks. First, the key factors that limit the per-node throughput of wireless mesh networks are analyzed, through which two major ones are identified, i.e., link sharing and interference. Next, a multi-tier hierarchical architecture is proposed to overcome the link-sharing issue. The inter-tier interference under this architecture is then mitigated by utilizing orthogonal frequency allocation between adjacent tiers, while the intra-tier interference is reduced by considering two specific transmission schemes, one is MIMO spatial multiplexing with time-division, the other is MIMO beamforming. Theoretical analysis shows that the multi-tier mesh networking architecture can achieve a per-node throughput of $\Theta(1)$ in both schemes, as long as certain conditions on network parameters including bandwidth, antenna numbers, and node numbers of each tier are satisfied. A case study on a realistic deployment of 10,000 nodes is then carried out, which demonstrates that a scalable throughput of $\Theta(1)$ is achievable with a reasonable assumption on bandwidth and antenna numbers.Comment: ~12pages, 4 figures, submitted to IEEE TIT, part of this work has been published in IEEE MASS 202

Interference Mitigation in Multi-Hop Wireless Networks with Advanced Physical-Layer Techniques

In my dissertation, we focus on the wireless network coexistence problem with advanced physical-layer techniques. For the first part, we study the problem of Wireless Body Area Networks (WBAN)s coexisting with cross-technology interference (CTI). WBANs face the RF cross-technology interference (CTI) from non-protocol-compliant wireless devices. Werst experimentally characterize the adverse effect on BAN caused by the CTI sources. Then we formulate a joint routing and power control (JRPC) problem, which aims at minimizing energy consumption while satisfying node reachability and delay constraints. We reformulate our problem into a mixed integer linear programing problem (MILP) and then derive the optimal results. A practical JRPC protocol is then proposed. For the second part, we study the coexistence of heterogeneous multi-hop networks with wireless MIMO. We propose a new paradigm, called cooperative interference mitigation (CIM), which makes it possible for disparate networks to cooperatively mitigate the interference to/from each other to enhance everyone\u27s performance. We establish two tractable models to characterize the CIM behaviors of both networks by using full IC (FIC) and receiver-side IC (RIC) only. We propose two bi-criteria optimization problems aiming at maximizing both networks\u27 throughput, while cooperatively canceling the interference between them based on our two models. In the third and fourth parts, we study the coexistence problem with MIMO from a different point of view: the incentive of cooperation. We propose a novel two-round game framework, based on which we derive two networks\u27 equilibrium strategies and the corresponding closed-form utilities. We then extend our game-theoretical analysis to a general multi-hop case, specifically the coexistence problem between primary network and multi-hop secondary network in the cognitive radio networks domain. In the final part, we study the benefits brought by reconfigurable antennas (RA). We systematically exploit the pattern diversity and fast reconfigurability of RAs to enhance the throughput of MWNs. Werst propose a novel link-layer model that captures the dynamic relations between antenna pattern, link coverage and interference. Based on our model, a throughput optimization framework is proposed by jointly considering pattern selection and link scheduling, which is formulated as a mixed integer non-linear programming problem

Link Scheduling Algorithms For In-Band Full-Duplex Wireless Networks

In the last two decades, wireless networks and their corresponding data traffic have grown significantly. This is because wireless networks have become an indispens- able and critical communication infrastructure in a modern society. An on-going challenge in communication systems is meeting the continuous increase in traffic de- mands. This is driven by the proliferation of electronic devices such as smartphones with a WiFi interface along with their bandwidth intensive applications. Moreover, in the near future, sensor devices that form the Internet of Things (IoTs) ecosystem will also add to future traffic growth. One promising approach to meet growing traffic demands is to equip nodes with an In-band-Full-Duplex (IBFD) radio. This radio thus allows nodes to transmit and receive data concurrently over the same frequency band. Another approach to in- crease network or link capacity is to exploit the benefits of Multiple-Input-Multiple- Output (MIMO) technologies; namely, (i) spatial diversity gain, which improves Signal-to-Noise Ratio (SNR) and thus has a direct impact on the data rate used by nodes, and (ii) spatial multiplexing gain, whereby nodes are able to form concurrent links to neighbors

Cross-layer Design for Wireless Mesh Networks with Advanced Physical and Network Layer Techniques

Cross-layer optimization is an essential tool for designing wireless network protocols. We present a cross-layer optimization framework for wireless networks where at each node, various smart antenna techniques such as beam-forming, spatial division multiple access and spatial division multiplexing are employed. These techniques provide interference suppression, capability for simultaneous communication with several nodes and transmission with higher data rates, respectively. By integrating different combinations of these multi-antenna techniques in physical layer with various constraints from MAC and network layers, three Mixed Integer Linear Programming models are presented to minimize the scheduling period. Since these optimization problems are combinatorially complex, the optimal solution is approached by a Column Generation (CG) decomposition method. Our numerical results show that the resulted directive, multiple access and multiplexing gains combined with scheduling, effectively increase both the spatial reuse and the capacity of the links and therefore enhance the achievable system throughput. The introduced cross-layer approach is also extended to consider heterogeneous networks where we present a multi-criteria optimization framework to model the design problem with an objective of jointly minimizing the cost of deployment and the scheduling period. Our results reveal the significant benefits of this joint design method. We also investigate the achievable performance gain that network coding (with opportunistic listening) when combined with Successive Interference Cancellation (SIC) brings to a multi-hop wireless network. We develop a cross-layer formulation in which SIC enables concurrent receptions from multiple transmitters and network coding reduces the transmission time-slot for minimizing the scheduling time. To solve this combinatorially complex non-linear problem, we decompose it to two linear sub-problems; namely opportunistic network coding aware routing, and scheduling sub-problems. Our results affirm our expectation for a remarkable performance improvement when both techniques are jointly used. Further, we develop an optimization model for combining SIC with power control (PC). Our model optimally adjusts the transmission power of nodes to avoid interference on unintended receivers and properly embraces undesired interference through SIC. Therefore, it provides a balance between usage of PC and SIC at the transmitting and receiving sides, respectively. Our results show considerable throughput improvement in dense and heavily loaded networks