Optimal pilot placement for frequency offset estimation and data detection in burst transmission systems

In this letter, we address the problem of pilot design for Carrier Frequency Offset (CFO) and data detection in digital burst transmission systems. We consider a quasi-static flat-fading channel. We find that placing half of the pilot symbols at the beginning of the burst and the other half at the end of the burst is optimal for both CFO estimation and data detection. Our findings are based on the Cram´er-Rao bound and on empirical evaluations of the bit error rate for different pilot designs. The equal-preamble-postamble pilot design is shown to provide a significant gain in performance over the conventional preambleonly pilot design

Impact and compensation of carrier synchronization errors in OFDM signals with very large QAM constellations

Publisher Copyright: © 2023 The Authors. IET Communications published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology.Low cost video sensors used for streaming video signals to help firefighters, require high bit rate due to uncompressed images. To increase spectral efficiency given a limited bandwidth, very high order constellations in high signal to noise ratio regimes can be used. However, noise is not the only factor effecting the high order constellations. These constellations are also sensitive to hardware impairments and system non-linearities. Therefore, in this paper, the effect of carrier frequency offset (CFO) on the performance of an orthogonal frequency division multiplexing (OFDM) system with high order quadrature amplitude modulation (QAM) is studied. A closed form expression is derived for the maximum normalized residual CFO that an OFDM system with M-QAM constellation can resist to have an error free symbol detection. Finally, the suitability of common previous CFO estimation techniques such as the cyclic prefix based technique and the Moose technique in these systems are investigate. The results show that the maximum residual CFO that an OFDM system with M-QAM constellation can resist is proportional to the inverse of (Formula presented.). The results also show that very large order QAM constellations such as 4096-QAM are very sensitive to even small residual CFO values and their performance degrades, significantly. However, the bit error rate analysis indicate that the Moose CFO estimation technique can be used in these systems to compensate the CFO effect, accurately.publishersversionpublishe

Scattered Pilots and Virtual Carriers Based Frequency Offset Tracking for OFDM Systems: Algorithms, Identifiability, and Performance Analysis

In this paper, we propose a novel carrier frequency offset (CFO) tracking algorithm for orthogonal frequency division multiplexing (OFDM) systems by exploiting scattered pilot carriers and virtual carriers embedded in the existing OFDM standards. Assuming that the channel remains constant during two consecutive OFDM blocks and perfect timing, a CFO tracking algorithm is proposed using the limited number of pilot carriers in each OFDM block. Identifiability of this pilot based algorithm is fully discussed under the noise free environment, and a constellation rotation strategy is proposed to eliminate the c-ambiguity for arbitrary constellations. A weighted algorithm is then proposed by considering both scattered pilots and virtual carriers. We find that, the pilots increase the performance accuracy of the algorithm, while the virtual carriers reduce the chance of CFO outlier. Therefore, the proposed tracking algorithm is able to achieve full range CFO estimation, can be used before channel estimation, and could provide improved performance compared to existing algorithms. The asymptotic mean square error (MSE) of the proposed algorithm is derived and simulation results agree with the theoretical analysis

Implementation of uplink network-coded modulation for two-hop networks

With the fast growing number of wireless devices and demand of user data, the backhaul load becomes a bottleneck in wireless networks. Physical layer network coding (PNC) allows Access Points (APs) to relay compressed, network coded user data, therefore reducing the backhaul traffic. In this paper, an implementation of uplink Network Coded Modulation (NetCoM) with PNC is presented. A 5-node prototype NetCoM system is established using Universal Software Radio Peripherals (USRPs) and a practical PNC scheme designed for binary systems is utilised. An orthogonal frequency division multiplexing (OFDM) waveform implementation and the practical challenges (e.g. device synchronisation and clock drift) of applying OFDM to NetCoM are discussed. To the best of our knowledge this is the first PNC implementation in an uplink scenario in radio access networks and our prototype provides an industrially-applicable implementation of the proposed NetCoM with PNC approach

Advanced methods in automatic modulation classification for emerging technologies

Modulation classification (MC) is of large importance in both military and commercial communication applications. It is a challenging problem, especially in non-cooperative wireless environments, where channel fading and no prior knowledge on the incoming signal are major factors that deteriorate the reception performance. Although the average likelihood ratio test method can provide an optimal solution to the MC problem with unknown parameters, it suffers from high computational complexity and in some cases mathematical intractability. Instead, in this research, an array-based quasi-hybrid likelihood ratio test (qHLRT) algorithm is proposed, which depicts two major advantages. First, it is simple yet accurate enough parameter estimation with reduced complexity. Second the incorporation of antenna arrays offers an effective ability to combat fading. Furthermore, a practical array-based qHLRT classifier scheme is implemented, which applies maximal ratio combining (MRC) to increase the accuracy of both carrier frequency offset (CFO) estimation and likelihood function calculation in channel fading. In fact, double CFO estimations are executed in this classifier. With the first the unknown CFO, phase offsets and amplitudes are estimated as prerequisite for MRC operation. Then, MRC is performed using these estimates, followed by a second CFO estimator. Since the input of the second CFO estimator is the output of the MRC, fading effects on the incoming signals are removed significantly and signal-to-noise ratio (SNR) is augmented. As a result, a more accurate CFO estimate is obtained. Consequently, the overall classification performance is improved, especially in low SNR environment. Recently, many state-of-the-arts communication technologies, such as orthogonal frequency division multiplexing (OFDM) modulations, have been emerging. The need for distinguishing OFDM signal from single carrier has become obvious. Besides, some vital parameters of OFDM signals should be extracted for further processing. In comparison to the research on MC for single carrier single antenna transmission, much less attention has been paid to the MC for emerging modulation methods. A comprehensive classification system is proposed for recognizing the OFDM signal and extracting its parameters. An automatic OFDM modulation classifier is proposed, which is based on the goodness-of-fittest. Since OFDM signal is Gaussian, Cramer-von Mises technique, working on the empirical distribution function, has been applied to test the presence of the normality. Numerical results show that such approach can successfully identify OFDM signals from single carrier modulations over a wide SNR range. Moreover, the proposed scheme can provide the acceptable performance when frequency-selective fading is present. Correlation test is then applied to estimate OFDM cyclic prefix duration. A two-phase searching scheme, which is based on Fast Fourier Transform (FFT) as well as Gaussianity test, is devised to detect the number of subcarriers. In the first phase, a coarse search is carried out iteratively. The exact number of subcarriers is determined by the fine tune in the second phase. Both analytical work and numerical results are presented to verify the efficiency of the proposed scheme