273 research outputs found
Performance Prediction of Nonbinary Forward Error Correction in Optical Transmission Experiments
In this paper, we compare different metrics to predict the error rate of
optical systems based on nonbinary forward error correction (FEC). It is shown
that the correct metric to predict the performance of coded modulation based on
nonbinary FEC is the mutual information. The accuracy of the prediction is
verified in a detailed example with multiple constellation formats, FEC
overheads in both simulations and optical transmission experiments over a
recirculating loop. It is shown that the employed FEC codes must be universal
if performance prediction based on thresholds is used. A tutorial introduction
into the computation of the threshold from optical transmission measurements is
also given.Comment: submitted to IEEE/OSA Journal of Lightwave Technolog
Improving soft FEC performance for higher-order modulations via optimized bit channel mappings
Soft forward error correction with higher-order modulations is often
implemented in practice via the pragmatic bit-interleaved coded modulation
paradigm, where a single binary code is mapped to a nonbinary modulation. In
this paper, we study the optimization of the mapping of the coded bits to the
modulation bits for a polarization-multiplexed fiber-optical system without
optical inline dispersion compensation. Our focus is on protograph-based
low-density parity-check (LDPC) codes which allow for an efficient hardware
implementation, suitable for high-speed optical communications. The
optimization is applied to the AR4JA protograph family, and further extended to
protograph-based spatially coupled LDPC codes assuming a windowed decoder. Full
field simulations via the split-step Fourier method are used to verify the
analysis. The results show performance gains of up to 0.25 dB, which translate
into a possible extension of the transmission reach by roughly up to 8%,
without significantly increasing the system complexity.Comment: This paper was published in Optics Express and is made available as
an electronic reprint with the permission of OSA. The paper can be found at
the following URL on the OSA website:
http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-12-1454
Iterative decoding and detection for physical layer network coding
PhD ThesisWireless networks comprising multiple relays are very common and it is
important that all users are able to exchange messages via relays in the
shortest possible time. A promising technique to achieve this is physical
layer network coding (PNC), where the time taken to exchange messages
between users is achieved by exploiting the interference at the relay due
to the multiple incoming signals from the users. At the relay, the interference
is demapped to a binary sequence representing the exclusive-OR of
both users’ messages. The time to exchange messages is reduced because
the relay broadcasts the network coded message to both users, who can
then acquire the desired message by applying the exclusive-OR of their
original message with the network coded message. However, although
PNC can increase throughput it is at the expense of performance degradation
due to errors resulting from the demapping of the interference to
bits.
A number of papers in the literature have investigated PNC with an iterative
channel coding scheme in order to improve performance. However,
in this thesis the performance of PNC is investigated for end-to-end
(E2E) the three most common iterative coding schemes: turbo codes,
low-density parity-check (LDPC) codes and trellis bit-interleaved coded
modulation with iterative decoding (BICM-ID). It is well known that in
most scenarios turbo and LDPC codes perform similarly and can achieve
near-Shannon limit performance, whereas BICM-ID does not perform
quite as well but has a lower complexity. However, the results in this
thesis show that on a two-way relay channel (TWRC) employing PNC,
LDPC codes do not perform well and BICM-ID actually outperforms
them while also performing comparably with turbo codes. Also presented
in this thesis is an extrinsic information transfer (ExIT) chart
analysis of the iterative decoders for each coding scheme, which is used
to explain this surprising result. Another problem arising from the use
of PNC is the transfer of reliable information from the received signal at
the relay to the destination nodes. The demapping of the interference to
binary bits means that reliability information about the received signal
is lost and this results in a significant degradation in performance when
applying soft-decision decoding at the destination nodes. This thesis
proposes the use of traditional angle modulation (frequency modulation
(FM) and phase modulation (PM)) when broadcasting from the relay,
where the real and imaginary parts of the complex received symbols
at the relay modulate the frequency or phase of a carrier signal, while
maintaining a constant envelope. This is important since the complex
received values at the relay are more likely to be centred around zero and
it undesirable to transmit long sequences of low values due to potential
synchronisation problems at the destination nodes. Furthermore, the
complex received values, obtained after angle demodulation, are used to
derive more reliable log-likelihood ratios (LLRs) of the received symbols
at the destination nodes and consequently improve the performance of
the iterative decoders for each coding scheme compared with conventionally
coded PNC.
This thesis makes several important contributions: investigating the performance
of different iterative channel coding schemes combined with
PNC, presenting an analysis of the behaviour of different iterative decoding
algorithms when PNC is employed using ExIT charts, and proposing
the use of angle modulation at the relay to transfer reliable information
to the destination nodes to improve the performance of the iterative decoding
algorithms. The results from this thesis will also be useful for
future research projects in the areas of PNC that are currently being
addressed, such as synchronisation techniques and receiver design.Iraqi Ministry of Higher
Education and Scientific Research
Labeling Diversity for 2x2 WLAN Coded-Cooperative Networks
Labelling diversity is an efficient technique recently proposed in the literature and aims to improve the bit error rate(BER) performance of wireless local area network (WLAN) systems with two transmit and two receive antennas without increasing the transmit power and bandwidth requirements. In this paper, we employ labelling diversity with different space-time channel codes such as convolutional, turbo and low density parity check (LDPC) for both point-to-point and coded-cooperative communication scenarios. Joint iterative decoding schemes for distributed turbo and LDPC codes are also presented. BER performance bounds at an error floor (EF) region are derived and verified with the help of numerical simulations for both cooperative and non-cooperative schemes. Numerical simulations show that the coded-cooperative schemes with labelling diversity achieve better BER performances and use of labelling diversity at the source node significantly lowers relay outage probability and hence the overall BER performance of the coded-cooperative scheme is improved manifolds
Optimized Bit Mappings for Spatially Coupled LDPC Codes over Parallel Binary Erasure Channels
In many practical communication systems, one binary encoder/decoder pair is
used to communicate over a set of parallel channels. Examples of this setup
include multi-carrier transmission, rate-compatible puncturing of turbo-like
codes, and bit-interleaved coded modulation (BICM). A bit mapper is commonly
employed to determine how the coded bits are allocated to the channels. In this
paper, we study spatially coupled low-density parity check codes over parallel
channels and optimize the bit mapper using BICM as the driving example. For
simplicity, the parallel bit channels that arise in BICM are replaced by
independent binary erasure channels (BECs). For two parallel BECs modeled
according to a 4-PAM constellation labeled by the binary reflected Gray code,
the optimization results show that the decoding threshold can be improved over
a uniform random bit mapper, or, alternatively, the spatial chain length of the
code can be reduced for a given gap to capacity. It is also shown that for
rate-loss free, circular (tail-biting) ensembles, a decoding wave effect can be
initiated using only an optimized bit mapper
- …