Joint Concurrent Routing and Multi-Pointer Packet Scheduling in IEEE 802.16 Mesh Networks

IEEE 802.16, also known as Worldwide Interoperability for Microwave Access (WiMAX), is a standardization effort carried out by the IEEE to provide last-mile broadband access to end users. The IEEE 802.16 standard supports two medium access control (MAC) modes - a mandatory point to multipoint (PMP) mode and an optional mesh mode. In this paper, we propose an asymmetric interference aware routing algorithm and a new multipointer approach in implementing scheduling algorithms for IEEE 802.16 mesh networks. We modify three different centralized scheduling algorithms, fixed scheduling, ordered scheduling and per-slot scheduling using multipointer approach to allow for spatial reuse (SR) in IEEE 802.16 mesh networks. Simulation results reveal that fixed scheduling with SR provides the best performance

Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network. This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution. This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement

A coarse-grained dynamically reconfigurable MAC processor for power-sensitive multi-standard devices

DRMP, a Dynamically Reconfigurable MAC Processor, is an innovative, dynamically reconfigurable System-on-Chip architecture. The architecture exploits substantial overlaps in the functionality of different wireless MAC layers. Its flexibility is specialized for addressing the requirements of the MAC layer of wireless standards. It is targeted at consumer, multi-standard, handheld devices, and its design is meant to address the balance of flexibility and power-efficiency that this target market demands. The DRMP reconfigures packet-by-packet on the fly, allowing execution of concurrent protocol modes on a single hardware co-processor. An interrupt-driven programming model has also been presented and shown to implement the protocol state-machine of the three protocols on a CPU. These features will allow the DRMP to replace three MAC processors in a hand-held device. The most innovative component of the DRMP architecture is its Interface and Reconfiguration Controller. It uses a combination of asynchronous controllers to dynamically reconfigure the functional units in the architecture and delegate MAC tasks to them. The architecture has been modeled in Simulink at cycle-approximate abstraction. Results of simulations involving transmission and reception of packets have been presented, showing that the platform concurrently handles three protocol streams, reconfigures dynamically, yet meets and exceeds the protocol timing constraints, all at a moderate frequency. Its heterogeneous and coarse-grained functional units, limited connectivity requirements between these units, and proportionally large time that these resources are idle, promise a very modest power-consumption, suitable for mobile devices, while offering flexibility to implement different MAC protocols

A cross-layer quality-oriented energy-efficient scheme for multimedia delivery in wireless local area networks

Wireless communication technologies, although emerged only a few decades ago, have grown fast in both popularity and technical maturity. As a result, mobile devices such as Personal Digital Assistants (PDA) or smart phones equipped with embedded wireless cards have seen remarkable growth in popularity and are quickly becoming one of the most widely used communication tools. This is mainly determined by the flexibility, convenience and relatively low costs associated with these devices and wireless communications. Multimedia applications have become by far one of the most popular applications among mobile users. However this type of application has very high bandwidth requirements, seriously restricting the usage of portable devices. Moreover, the wireless technology involves increased energy consumption and consequently puts huge pressure on the limited battery capacity which presents many design challenges in the context of battery powered devices. As a consequence, power management has raised awareness in both research and industrial communities and huge efforts have been invested into energy conservation techniques and strategies deployed within different components of the mobile devices. Our research presented in this thesis focuses on energy efficient data transmission in wireless local networks, and mainly contributes in the following aspects: 1. Static STELA, which is a Medium Access Control (MAC) layer solution that adapts the sleep/wakeup state schedule of the radio transceiver according to the bursty nature of data traffic and real time observation of data packets in terms of arrival time. The algorithm involves three phases– slow start phase, exponential increase phase, and linear increase phase. The initiation and termination of each phase is self-adapted to real time traffic and user configuration. It is designed to provide either maximum energy efficiency or best Quality of Service (QoS) according to user preference. 2. Dynamic STELA, which is a MAC layer solution deployed on the mobile devices and provides balanced performance between energy efficiency and QoS. Dynamic STELA consists of the three phase algorithm used in static STELA, and additionally employs a traffic modeling algorithm to analyze historical traffic data and estimate the arrival time of the next burst. Dynamic STELA achieves energy saving through intelligent and adaptive increase of Wireless Network Interface Card (WNIC) sleeping interval in the second and the third phase and at the same time guarantees delivery performance through optimal WNIC waking timing before the estimated arrival of new data burst. 3. Q-PASTE, which is a quality-oriented cross-layer solution with two components employed at different network layers, designed for multimedia content delivery. First component, the Packet/ApplicaTion manager (PAT) is deployed at the application layer of both service gateway and client host. The gateway level PAT utilizes fast start, as a widely supported technique for multimedia content delivery, to achieve high QoS and shapes traffic into bursts to reduce the wireless transceiver’s duty cycle. Additionally, gateway-side PAT informs client host the starting and ending time of fast start to assist parameter tuning. The client-side PAT monitors each active session and informs the MAC layer about their traffic-related behavior. The second component, dynamic STELA, deployed at MAC layer, adaptively adjusts the sleep/wake-up behavior of mobile device wireless interfaces in order to reduce energy consumption while also maintaining high Quality of Service (QoS) levels. 4. A comprehensive survey on energy efficient standards and some of the most important state-of-the-art energy saving technologies is also provided as part of the work

Spectrum Sharing Methods in Coexisting Wireless Networks

Radio spectrum, the fundamental basis for wireless communication, is a finite resource. The development of the expanding range of radio based devices and services in recent years makes the spectrum scarce and hence more costly under the paradigm of extensive regulation for licensing. However, with mature technologies and with their continuous improvements it becomes apparent that tight licensing might no longer be required for all wireless services. This is from where the concept of utilizing the unlicensed bands for wireless communication originates. As a promising step to reduce the substantial cost for radio spectrum, different wireless technology based networks are being deployed to operate in the same spectrum bands, particularly in the unlicensed bands, resulting in coexistence. However, uncoordinated coexistence often leads to cases where collocated wireless systems experience heavy mutual interference. Hence, the development of spectrum sharing rules to mitigate the interference among wireless systems is a significant challenge considering the uncoordinated, heterogeneous systems. The requirement of spectrum sharing rules is tremendously increasing on the one hand to fulfill the current and future demand for wireless communication by the users, and on the other hand, to utilize the spectrum efficiently. In this thesis, contributions are provided towards dynamic and cognitive spectrum sharing with focus on the medium access control (MAC) layer, for uncoordinated scenarios of homogeneous and heterogeneous wireless networks, in a micro scale level, highlighting the QoS support for the applications. This thesis proposes a generic and novel spectrum sharing method based on a hypothesis: The regular channel occupation by one system can support other systems to predict the spectrum opportunities reliably. These opportunities then can be utilized efficiently, resulting in a fair spectrum sharing as well as an improving aggregated performance compared to the case without having special treatment. The developed method, denoted as Regular Channel Access (RCA), is modeled for systems specified by the wireless local resp. metropolitan area network standards IEEE 802.11 resp. 802.16. In the modeling, both systems are explored according to their respective centrally controlled channel access mechanisms and the adapted models are evaluated through simulation and results analysis. The conceptual model of spectrum sharing based on the distributed channel access mechanism of the IEEE 802.11 system is provided as well. To make the RCA method adaptive, the following enabling techniques are developed and integrated in the design: a RSS-based (Received Signal Strength based) detection method for measuring the channel occupation, a pattern recognition based algorithm for system identification, statistical knowledge based estimation for traffic demand estimation and an inference engine for reconfiguration of resource allocation as a response to traffic dynamics. The advantage of the RCA method is demonstrated, in which each competing collocated system is configured to have a resource allocation based on the estimated traffic demand of the systems. The simulation and the analysis of the results show a significant improvement in aggregated throughput, mean delay and packet loss ratio, compared to the case where legacy wireless systems coexists. The results from adaptive RCA show its resilience characteristics in case of dynamic traffic. The maximum achievable throughput between collocated IEEE 802.11 systems applying RCA is provided by means of mathematical calculation. The results of this thesis provide the basis for the development of resource allocation methods for future wireless networks particularly emphasized to operate in current unlicensed bands and in future models of the Open Spectrum Alliance

Estratégias de design de camada intermédia e cooperativa para redes sem fios energeticamente eficientes

Doutoramento conjunto MAP-i em InformáticaThe promise of a truly mobile experience is to have the freedom to roam around anywhere and not be bound to a single location. However, the energy required to keep mobile devices connected to the network over extended periods of time quickly dissipates. In fact, energy is a critical resource in the design of wireless networks since wireless devices are usually powered by batteries. Furthermore, multi-standard mobile devices are allowing users to enjoy higher data rates with ubiquitous connectivity. However, the bene ts gained from multiple interfaces come at a cost in terms of energy consumption having profound e ect on the mobile battery lifetime and standby time. This concern is rea rmed by the fact that battery lifetime is one of the top reasons why consumers are deterred from using advanced multimedia services on their mobile on a frequent basis. In order to secure market penetration for next generation services energy e ciency needs to be placed at the forefront of system design. However, despite recent e orts, energy compliant features in legacy technologies are still in its infancy, and new disruptive architectures coupled with interdisciplinary design approaches are required in order to not only promote the energy gain within a single protocol layer, but to enhance the energy gain from a holistic perspective. A promising approach is cooperative smart systems, that in addition to exploiting context information, are entities that are able to form a coalition and cooperate in order to achieve a common goal. Migrating from this baseline, this thesis investigates how these technology paradigm can be applied towards reducing the energy consumption in mobile networks. In addition, we introduce an additional energy saving dimension by adopting an interlayer design so that protocol layers are designed to work in synergy with the host system, rather than independently, for harnessing energy. In this work, we exploit context information, cooperation and inter-layer design for developing new energy e cient and technology agnostic building blocks for mobile networks. These technology enablers include energy e cient node discovery and short-range cooperation for energy saving in mobile handsets, complemented by energy-aware smart scheduling for promoting energy saving on the network side. Analytical and simulations results were obtained, and veri ed in the lab on a real hardware testbed. Results have shown that up to 50% energy saving could be obtained.A promessa de uma experiência realmente móvel é de ter a liberdade de deambular por qualquer sítio e não estar preso a um único local. No entanto, a energia requerida para manter dispositivos móveis conectados à rede, num período extenso de tempo, o mesmo rapidamente se dissipa. Na realidade, a energia é um recurso crítico no design de redes sem fios, uma vez que esses dispositivos são alimentados por baterias. Para além disso, dispositivos móveis multi-standard permitem que os utilizadores desfrutem de elevadas taxas de dados com conectividade omnipresente. No entanto, as vantagens adquiridas pelas múltiplas interfaces, imputa uma despesa, sendo essa um consumo maior de energia, numa era onde os dispositivos móveis têm de ser energicamente complacentes. Esta preocupação é reafirmada pelo facto de que a vida da bateria é uma das principais razões que impede os utilizadores de usufruir e utilizar de serviços de multimédia mais avançados nos seus dispositivos, numa base frequente. De forma a assegurar a entrada no mercado para serviços da próxima geração, eficiência energética tem de ser colocada na vanguarda do design de sistemas. No entanto, apesar de esforços recentes, funcionalidades que cumpram os requisitos energéticos em tecnologias "legacy" ainda estão nos seus primórdios e novas abordagens disruptivas são requeridas, juntamente com abordagem de design interdisciplinar, de forma a aproveitar a poupança energética das diversas camadas protocolares. Uma bordagem promissora são os sistemas de cooperação inteligente, que exploram não são contexto da informação, mas também as entidades que são igualmente capazes de formar uma coligação e cooperam de forma a atingir um objectivo comum. Migrar a partir destas referências, esta tese investiga como é que este paradigma tecnológico pode ser aplicado para reduzir a potência e consumo de energia em redes móveis. Para além disso, introduzimos uma dimensão de poupança energética adicional, para adopção de design de camadas intermédias, de forma a que as camadas de protocolos sejam concebidas para trabalhar em sinergia com o sistema anfitrião, ao invés de independentemente, para aproveitamento de energia. Neste trabalho, nós exploramos o contexto da informação, cooperação e design de camadas intermédias para desenvolver blocos de construção energicamente eficientes e tecnologias agnósticas para redes móveis. Estes habilitadores (enablers) tecnológicos incluem um nó de descoberta de energia eficiente e cooperação de curto alcance para poupança energética em aparelhos móveis, complementado com agendamento inteligente, energicamente consciente, de forma a promover a poupança de energia do lado da rede. Analiticamente e simultaneamente, foram obtidos resultados e verificados em laboratório, num modelo de hardware protótipo. Resultados demonstram que pode ser obtido uma poupança energética acima dos 50%

End to end architecture and mechanisms for mobile and wireless communications in the Internet

Architecture et mécanismes de bout en bout pour les communications mobiles et sans fil dans l'Internet. La gestion performante de la mobilité et l'amélioration des performances des couches basses sont deux enjeux fondamentaux dans le contexte des réseaux sans fil. Cette thèse apporte des solutions originales et innovantes qui visent à répondre à ces deux problématiques empêchant à ce jour d'offrir des possibilités de communication performantes et sans couture aux usagers mobiles accédant à l'Internet via des réseaux d'accès locaux sans fil (WLAN). Ces solutions se distinguent en particulier par l'impact minimum qu'elles ont sur les protocoles standards de l'Internet (niveaux transport et réseau) ou de l'IEEE (niveaux physique et liaison de données). S'inscrivant dans les paradigmes de "bout en bout" et "cross-layer", notre architecture permet d'offrir des solutions efficaces pour la gestion de la mobilité : gestion de la localisation et des handover en particulier. En outre, nous montrons que notre approche permet également d'améliorer l'efficacité des transmissions ainsi que de résoudre efficacement plusieurs syndromes identifiés au sein de 802.11 tels que les anomalies de performance, l'iniquité entre les flux et l'absence de contrôle de débit entre la couche MAC et les couches supérieures. Cette thèse résout ces problèmes en combinant des modèles analytiques, des simulations et de réelles expérimentations. Ces mécanismes adaptatifs ont été développés et intégrés dans une architecture de communication qui fournit des services de communication à haute performance pour réseaux sans fils tels que WIFI et WIMAX. ABSTRACT : Wireless networks, because of the potential pervasive and mobile communication services they offer, are becoming the dominant Internet access networks. However, the legacy Internet protocols, still dominant at that time, have not been designed with mobility and wireless in mind. Therefore, numerous maladjustments and “defaults of impedance” can be observed when combining wireless physical and MAC layers with the traditional upper layers. This thesis proposes several solutions for a pacific coexistence between these communication layers that have been defined and designed independently. Reliable mobility management and Low layer performance enhancements are two main challenging issues in the context of wireless networks. Mobility management (which is mostly based on mobile IP architecture nowadays) aims to continuously assign and control the wireless connections of mobile nodes amongst a space of wireless access networks. Low layer performance enhancements mainly focus on the transmission efficiency such as higher rate, lower loss, interference avoidance. This thesis addresses these two important issues from an original and innovative approach that, conversely to the traditional contributions, entails a minimum impact on the legacy protocols and internet infrastructure. Following the “end to end” and “cross layer” paradigms, we address and offer efficient and light solutions to fast handover, location management and continuous connection support through a space of wireless networks. Moreover, we show that such an approach makes it possible to enhance transmission efficiency and solve efficiently several syndromes that plague the performances of current wireless networks such as performance anomaly, unfairness issues and maladjustment between MAC layer and upper layers. This thesis tackles these issues by combining analytical models, simulations and real experiments. The resulting mechanisms have been developed and integrated into adaptive mobility management communication architecture that delivers high performing communication services to mobile wireless systems, with a focus on WIFI and WIMAX access networks

An improved medium access control protocol for real-time applications in WLANs and its firmware development

The IEEE 802.11 Wireless Local Area Network (WLAN), commonly known as Wi-Fi, has emerged as a popular internet access technology and researchers are continuously working on improvement of the quality of service (QoS) in WLAN by proposing new and efficient schemes. Voice and video over Internet Protocol (VVoIP) applications are becoming very popular in Wi-Fi enabled portable/handheld devices because of recent technological advancements and lower service costs. Different from normal voice and video streaming, these applications demand symmetric throughput for the upstream and downstream. Existing Wi-Fi standards are optimised for generic internet applications and fail to provide symmetric throughput due to traffic bottleneck at access points. Performance analysis and benchmarking is an integral part of WLAN research, and in the majority of the cases, this is done through computer simulation using popular network simulators such as Network Simulator ff 2 (NS-2) or OPNET. While computer simulation is an excellent approach for saving time and money, results generated from computer simulations do not always match practical observations. This is why, for proper assessment of the merits of a proposed system in WLAN, a trial on a practical hardware platform is highly recommended and is often a requirement. In this thesis work, with a view to address the abovementioned challenges for facilitating VoIP and VVoIP services over Wi-Fi, two key contributions are made: i) formulating a suitable medium access control (MAC) protocol to address symmetric traffic scenario and ii) firmware development of this newly devised MAC protocol for real WLAN hardware. The proposed solution shows signifocant improvements over existing standards by supporting higher number of stations with strict QoS criteria. The proposed hardware platform is available off-the-shelf in the market and is a cost effective way of generating and evaluating performance results on a hardware system