Timing and Frequency Synchronization and Channel Estimation in OFDM-based Systems

Orthogonal frequency division multiplexing (OFDM) due to its appealing features, such as robustness against frequency selective fading and simple channel equalization, is adopted in communications systems such as WLAN, WiMAX and DVB. However, OFDM systems are sensitive to synchronization errors caused by timing and frequency offsets. Besides, the OFDM receiver has to perform channel estimation for coherent detection. The goal of this thesis is to investigate new methods for timing and frequency synchronization and channel estimation in OFDM-based systems. First, we investigate new methods for preamble-aided coarse timing estimation in OFDM systems. Two novel timing metrics using high order statistics-based correlation and differential normalization functions are proposed. The performance of the new timing metrics is evaluated using different criteria including class-separability, robustness to the carrier frequency offset, and computational complexity. It is shown that the new timing metrics can considerably increase the class-separability due to their more distinct values at correct and wrong timing instants, and thus give a significantly better detection performance than the existing timing metrics do. Furthermore, a new method for coarse estimation of the start of the frame is proposed, which remarkably reduces the probability of inter-symbol interference (ISI). The improved performances of the new schemes in multipath fading channels are shown by the probabilities of false alarm, missed-detection and ISI obtained through computer simulations. Second, a novel pilot-aided algorithm is proposed for the detection of integer frequency offset (IFO) in OFDM systems. By transforming the IFO into two new integer parameters, the proposed method can largely reduce the number of trial values for the true IFO. The two new integer parameters are detected using two different pilot sequences, a periodic pilot sequence and an aperiodic pilot sequence. It is shown that the new scheme can significantly reduce the computational complexity while achieving almost the same performance as the previous methods do. Third, we propose a method for joint timing and frequency synchronization and channel estimation for OFDM systems that operate in doubly selective channels. Basis expansion modeling (BEM) that captures the time variations of the channel is used to reduce the number of unknown channel parameters. The BEM coefficients along with the timing and frequency offsets are estimated by using a maximum likelihood (ML) approach. An efficient algorithm is then proposed for reducing the computational complexity of the joint estimation. The complexity of the new method is assessed in terms of the number of multiplications. The mean square estimation error of the proposed method is evaluated in comparison with previous methods, indicating a remarkable performance improvement by the new method. Fourth, we present a new scheme for joint estimation of CFO and doubly selective channel in orthogonal frequency division multiplexing systems. In the proposed preamble-aided method, the time-varying channel is represented using BEM. CFO and BEM coefficients are estimated using the principles of particle and Kalman filtering. The performance of the new method in multipath time-varying channels is investigated in comparison with previous schemes. The simulation results indicate a remarkable performance improvement in terms of the mean square errors of CFO and channel estimates. Fifth, a novel algorithm is proposed for timing and frequency synchronization and channel estimation in the uplink of orthogonal frequency division multiple access (OFDMA) systems by considering high-mobility situations and the generalized subcarrier assignment. By using BEM to represent a doubly selective channel, a maximum likelihood (ML) approach is proposed to jointly estimate the timing and frequency offsets of different users as well as the BEM coefficients of the time-varying channels. A space-alternating generalized expectation-maximization algorithm is then employed to transform the maximization problem for all users into several simpler maximization problems for each user. The computational complexity of the new timing and frequency offset estimator is analyzed and its performance in comparison with that of existing methods using the mean square error is evaluated . Finally, two novel approaches for joint CFO and doubly selective channel estimation in the uplink of multiple-input multiple-output orthogonal frequency division multiple access (MIMO-OFDMA) systems are presented. Considering high-mobility situations, where channels change within an OFDMA symbol interval, and the time varying nature of CFOs, BEM is employed to represent the time variations of the channel. Two new approaches are then proposed based on Schmidt Kalman filtering (SKF). The first approach utilizes Schmidt extended Kalman filtering for each user to estimate the CFO and BEM coefficients. The second approach uses Gaussian particle filter along with SKF to estimate the CFO and BEM coefficients of each user. The Bayesian Cramer Rao bound is derived, and performance of the new schemes are evaluated using mean square error. It is demonstrated that the new schemes can significantly improve the mean square error performance in comparison with that of the existing methods

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Advanced receiver structures for mobile MIMO multicarrier communication systems

Beyond third generation (3G) and fourth generation (4G) wireless communication systems are targeting far higher data rates, spectral efficiency and mobility requirements than existing 3G networks. By using multiple antennas at the transmitter and the receiver, multiple-input multiple-output (MIMO) technology allows improving both the spectral efficiency (bits/s/Hz), the coverage, and link reliability of the system. Multicarrier modulation such as orthogonal frequency division multiplexing (OFDM) is a powerful technique to handle impairments specific to the wireless radio channel. The combination of multicarrier modulation together with MIMO signaling provides a feasible physical layer technology for future beyond 3G and fourth generation communication systems. The theoretical benefits of MIMO and multicarrier modulation may not be fully achieved because the wireless transmission channels are time and frequency selective. Also, high data rates call for a large bandwidth and high carrier frequencies. As a result, an important Doppler spread is likely to be experienced, leading to variations of the channel over very short period of time. At the same time, transceiver front-end imperfections, mobility and rich scattering environments cause frequency synchronization errors. Unlike their single-carrier counterparts, multi-carrier transmissions are extremely sensitive to carrier frequency offsets (CFO). Therefore, reliable channel estimation and frequency synchronization are necessary to obtain the benefits of MIMO OFDM in mobile systems. These two topics are the main research problems in this thesis. An algorithm for the joint estimation and tracking of channel and CFO parameters in MIMO OFDM is developed in this thesis. A specific state-space model is introduced for MIMO OFDM systems impaired by multiple carrier frequency offsets under time-frequency selective fading. In MIMO systems, multiple frequency offsets are justified by mobility, rich scattering environment and large angle spread, as well as potentially separate radio frequency - intermediate frequency chains. An extended Kalman filter stage tracks channel and CFO parameters. Tracking takes place in time domain, which ensures reduced computational complexity, robustness to estimation errors as well as low estimation variance in comparison to frequency domain processing. The thesis also addresses the problem of blind carrier frequency synchronization in OFDM. Blind techniques exploit statistical or structural properties of the OFDM modulation. Two novel approaches are proposed for blind fine CFO estimation. The first one aims at restoring the orthogonality of the OFDM transmission by exploiting the properties of the received signal covariance matrix. The second approach is a subspace algorithm exploiting the correlation of the channel frequency response among the subcarriers. Both methods achieve reliable estimation of the CFO regardless of multipath fading. The subspace algorithm needs extremely small sample support, which is a key feature in the face of time-selective channels. Finally, the Cramér-Rao (CRB) bound is established for the problem in order to assess the large sample performance of the proposed algorithms.reviewe

Analysis of data-aided channel tracking for hybrid massive MIMO systems in millimeter wave communications

As the data traffic in future wireless communications will explosively grow up to 1000 folds by the deployment of 5G, several technologies are emerging to satisfy this demand, including massive multiple-input multiple-output (MIMO), millimeter wave(mmWave) communications, Non-Orthogonal Multiple Access (NOMA), etc. The combination of millimeter wave communication and massive MIMO is a promising solution since it can provide tens of GHz bandwidth by fundamentally exploring higher unoccupied spectrum resources. As the wavelength of higher frequency shrinks, it is possible to design more compact antenna array with a very large number of antennas. However, this will cause enormous hardware cost, energy consumption and computation complexity of decent RF(Radio Frequency) chains. To this end, spatial sparsity is widely explored to enable hybrid mmWave massive MIMO systems with limited RF chains to achieve high spectral and energy efficiency. On the other hand, channel estimation problem for systems with limited RF chains is quite challenging due to the unaffordable overhead. To be specific, the conventional pilot-based channel estimation requires to repeatedly transmit the same pilot because only a limited number of antennas will be activated for each time slot. Therefore, it consumes a huge amount of temporal and spectral resources. To overcome this problem, channel estimation for mmWave massive MIMO systems is still an on-going research area. Among plenty of candidates, channel tracking is the most promising one. To achieve the extremely low cost and complexity, which is also the greatest motivation of this thesis, data-aided channel tracking method is thoroughly investigated with closed-form CRLB(Cram´er-Rao lower bound). In this thesis, data-aided channel tracking systems with different types of antenna, including ULA(Uniform Linear Antenna array), DLA(Discrete Lens Antenna ar ray) and UPA(Uniform Planar Antenna array), are comprehensively studied and proposed, and the closed-form expressions of the corresponding CRLBs are carefully derived. The numerical results of the simulations for each case are shown respectively, and they reveal that the performance of the proposed data-aided channel tracking system approaches the CRLB very well. In addition, to further explore the data-aided channel tracking system, the multi-user scenario is investigated in this thesis. This is motivated by the highway and high-speed railway application, where overtaking operation happens frequently. In this case, the users in the same beam suffer from high channel interference, thus degrading the channel estimation performance or even causing outage. To deal with this issue, we proposed an estimated SER(Symbol Error Rate) metric to indicate if a scheduling operation is necessary to be taken place and restart of the whole channel tracking system is required. This metric is included as the Update phase in the proposed channel tracking method for multiuser scenario with DLA. The theoretical SER closed-form expression is also derived for multi-user data detection. The numerical results of the simulations verified the theoretical SER expression, and the scheduling metric based on the estimated SER performance is also discussed

Waveform Design for 5G and beyond Systems

5G traffic has very diverse requirements with respect to data rate, delay, and reliability. The concept of using multiple OFDM numerologies adopted in the 5G NR standard will likely meet these multiple requirements to some extent. However, the traffic is radically accruing different characteristics and requirements when compared with the initial stage of 5G, which focused mainly on high-speed multimedia data applications. For instance, applications such as vehicular communications and robotics control require a highly reliable and ultra-low delay. In addition, various emerging M2M applications have sparse traffic with a small amount of data to be delivered. The state-of-the-art OFDM technique has some limitations when addressing the aforementioned requirements at the same time. Meanwhile, numerous waveform alternatives, such as FBMC, GFDM, and UFMC, have been explored. They also have their own pros and cons due to their intrinsic waveform properties. Hence, it is the opportune moment to come up with modification/variations/combinations to the aforementioned techniques or a new waveform design for 5G systems and beyond. The aim of this Special Issue is to provide the latest research and advances in the field of waveform design for 5G systems and beyond