35 research outputs found
Role of Interference and Computational Complexity in Modern Wireless Networks: Analysis, Optimization, and Design
Owing to the popularity of smartphones, the recent widespread adoption of wireless broadband has resulted in a tremendous growth in the volume of mobile data traffic, and this growth is projected to continue unabated. In order to meet the needs of future systems, several novel technologies have been proposed, including cooperative communications, cloud radio access networks (RANs) and very densely deployed small-cell networks. For these novel networks, both interference and the limited availability of computational resources play a very important role. Therefore, the accurate modeling and analysis of interference and computation is essential to the understanding of these networks, and an enabler for more efficient design.;This dissertation focuses on four aspects of modern wireless networks: (1) Modeling and analysis of interference in single-hop wireless networks, (2) Characterizing the tradeoffs between the communication performance of wireless transmission and the computational load on the systems used to process such transmissions, (3) The optimization of wireless multiple-access networks when using cost functions that are based on the analytical findings in this dissertation, and (4) The analysis and optimization of multi-hop networks, which may optionally employ forms of cooperative communication.;The study of interference in single-hop wireless networks proceeds by assuming that the random locations of the interferers are drawn from a point process and possibly constrained to a finite area. Both the information-bearing and interfering signals propagate over channels that are subject to path loss, shadowing, and fading. A flexible model for fading, based on the Nakagami distribution, is used, though specific examples are provided for Rayleigh fading. The analysis is broken down into multiple steps, involving subsequent averaging of the performance metrics over the fading, the shadowing, and the location of the interferers with the aim to distinguish the effect of these mechanisms that operate over different time scales. The analysis is extended to accommodate diversity reception, which is important for the understanding of cooperative systems that combine transmissions that originate from different locations. Furthermore, the role of spatial correlation is considered, which provides insight into how the performance in one location is related to the performance in another location.;While it is now generally understood how to communicate close to the fundamental limits implied by information theory, operating close to the fundamental performance bounds is costly in terms of the computational complexity required to receive the signal. This dissertation provides a framework for understanding the tradeoffs between communication performance and the imposed complexity based on how close a system operates to the performance bounds, and it allows to accurately estimate the required data processing resources of a network under a given performance constraint. The framework is applied to Cloud-RAN, which is a new cellular architecture that moves the bulk of the signal processing away from the base stations (BSs) and towards a centralized computing cloud. The analysis developed in this part of the dissertation helps to illuminate the benefits of pooling computing assets when decoding multiple uplink signals in the cloud. Building upon these results, new approaches for wireless resource allocation are proposed, which unlike previous approaches, are aware of the computing limitations of the network.;By leveraging the accurate expressions that characterize performance in the presence of interference and fading, a methodology is described for optimizing wireless multiple-access networks. The focus is on frequency hopping (FH) systems, which are already widely used in military systems, and are becoming more common in commercial systems. The optimization determines the best combination of modulation parameters (such as the modulation index for continuous-phase frequency-shift keying), number of hopping channels, and code rate. In addition, it accounts for the adjacent-channel interference (ACI) and determines how much of the signal spectrum should lie within the operating band of each channel, and how much can be allowed to splatter into adjacent channels.;The last part of this dissertation contemplates networks that involve multi-hop communications. Building on the analytical framework developed in early parts of this dissertation, the performance of such networks is analyzed in the presence of interference and fading, and it is introduced a novel paradigm for a rapid performance assessment of routing protocols. Such networks may involve cooperative communications, and the particular cooperative protocol studied here allows the same packet to be transmitted simultaneously by multiple transmitters and diversity combined at the receiver. The dynamics of how the cooperative protocol evolves over time is described through an absorbing Markov chain, and the analysis is able to efficiently capture the interference that arises as packets are periodically injected into the network by a common source, the temporal correlation among these packets and their interdependence
Two-Way Relaying Using Constant Envelope Modulation and Phase-Superposition-Phase-Forward
In this article, we propose the idea of phase-superposition-phase-forward (PSPF) relaying for 2-way 3-phasecooperative network involving constant envelope modulation with discriminator detection in a time-selectiveRayleigh fading environment. A semi-analytical expression for the bit-error-rate (BER) of this system is derived andthe results are verified by simulation. It was found that, compared to one-way relaying, 2-way relaying with PSPFsuffers only a moderate loss in energy efficiency (of 1.5 dB). On the other hand, PSPF improves the transmissionefficiency by 33%. Furthermore, we believe that the loss in transmission efficiency can be reduced if power isallocated to the different nodes in this cooperative network in an ‘optimal’ fashion. To further put the performanceof the proposed PSPF scheme into perspective, we compare it against a phase-combining phase-forwardtechnique that is based on decode-and-forward (DF) and multi-level CPFSK re-modulation at the relay. It wasfound that DF has a higher BER than PSPF and requires additional processing at the relay. It can thus beconcluded that the proposed PSPF technique is indeed the preferred way to maintain constant envelope signalingthroughout the signaling chain in a 2-way 3 phase relaying system
Physical layer network coding based communication systems in frequency selective channels
PhD ThesisThe demand for wireless communications is growing every day which requiresmore
speed and bandwidth. In two way relay networks (TWRN), physical
layer network coding (PLNC) was proposed to double the bandwidth. A
TWRN is a system where two end users exchange data through a middle node
called the relay. The two signals are allowed to be physically added before being
broadcasted back to the end users. This system can work smoothly in flat
fading channels, but can not be applied straightforward in frequency selective
channels. In a multipath multi-tap FIR channel, the inter-symbol interference
(ISI) spreads through several symbols. In this case, the symbols at the relay
are not just an addition of the sent symbols but also some of the previous
symbols from both sides. This not only causes a traditional PLNC to fail but
also a simple one equalizer system will not solve the problem. Three main
methods have been proposed by other researchers. The OFDM based PLNC
is the simplest in terms of implementation and complexity but suffers from
the disadvantages of the OFDMlike cyclic prefix overhead and frequency offset.
The main disadvantage, however is the relatively low BER performance
because it is restricted to linear equalizers in the PLNC system. Another
approach is pre-filtering or pre-equalization. This method also has some disadvantages
like complexity, sensitivity to channel variation and the need of
a feedback channel for both end nodes. Finally, the maximum likelihood
sequence detector was also proposed but is restricted to BPSK modulation
and exponentially rising complexity are major drawbacks. The philosophy in
this work is to avoid these disadvantages by using a time domain based system.
The DFE is the equalizer of choice here because it provides a non-trivial
BER performance improvement with very little increase in complexity. In
this thesis, the problem of frequency selective channels in PLNC systems can
be solved by properly adjusting the design of the system including the DFE.
The other option is to redesign the equalizer to meet that goal. An AF DFE
system is proposed in this work that provides very low complexity especially
at the relay with little sensitivity to channel changes. A multi-antenna DNF
DFE system is also proposed here with an improved performance. Finally, a
new equalizer is designed for very low complexity and cost DNF approach
with little sacrifice of BER performance. Matlab was used for the simulations
with Monte Carlo method to verify the findings of this work through finding
the BER performance of each system. This thesis opens the door for future
improvement on the PLNC system. More research needs to be done like testing
the proposed systems in real practical implementation and also the effect
of adding channel coding to these systems.Iraqi Government, Ministry of
Higher Educatio
Recommended from our members
Study of continuous-phase four-state modulation for cordless telecommunications. Assessment by simulation of CP-QFSK as an alternative modulation scheme for TDMA digital cordless telecommunications systems operating in indoor applications
One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain.Higher Education Ministr
Parameter Estimation and Tracking in Physical Layer Network Coding
Recently, there has been a growing interest in improving the performance of the wireless relay networks through the use of Physical Layer Network Coding (PLNC) techniques. The physical layer network coding technique allows two terminals to transmit simultaneously to a relay node and decode the modulo-2 sum of the transmitted bits at the relay. This technique considerably improves performance over Digital Network Coding technique.
In this thesis, we will present an algorithm for joint decoding of the modulo-2 sum of bits transmitted from two unsynchronized transmitters at the relay. We shall also address the problems that arise when boundaries of the signals do not align with each other and when the channel parameters are slowly varying and are unknown to the receiver at the relay node. Our approach will first jointly estimate the timing o sets and fading gains of both signals using a known pilot sequence sent by both
transmitters in the beginning of the packet and then perform Maximum Likelihood detection of data using a state-based Viterbi decoding scheme that takes into account the timing o sets between the interfering signals. We shall present an algorithm for simultaneously tracking the amplitude and phase of slowly varying wireless channel
that will work in conjunction our Maximum Likelihood detection algorithm. Finally, we shall provide extension of our receiver to support antenna diversity.
Our results show that the proposed detection algorithm works reasonably well, even with the assumption of timing misalignment. We also demonstrate that the performance of the algorithm is not degraded by amplitude and/or phase mismatch between the users. We further show that the performance of the channel tracking algorithm is close to the ideal case i.e. when the channel estimates are perfectly known. Finally, we demonstrate the performance boost provided by the receiver antenna diversity