High-performance Global Routing for Trillion-gate Systems-on-Chips.

Due to aggressive transistor scaling, modern-day CMOS circuits have continually increased in both complexity and productivity. Modern semiconductor designs have narrower and more resistive wires, thereby shifting the performance bottleneck to interconnect delay. These trends considerably impact timing closure and call for improvements in high-performance physical design tools to keep pace with the current state of IC innovation. As leading-edge designs may incorporate tens of millions of gates, algorithm and software scalability are crucial to achieving reasonable turnaround time. Moreover, with decreasing device sizes, optimizing traditional objectives is no longer sufficient. Our research focuses on (i) expanding the capabilities of standalone global routing, (ii) extending global routing for use in different design applications, and (iii) integrating routing within broader physical design optimizations and flows, e.g., congestion-driven placement. Our first global router relies on integer-linear programming (ILP), and can solve fairly large problem instances to optimality. Our second iterative global router relies on Lagrangian relaxation, where we relax the routing violation constraints to allowing routing overflow at a penalty. In both approaches, our desire is to give the router the maximum degree of freedom within a specified context. Empirically, both routers produce competitive results within a reasonable amount of runtime. To improve routability, we explore the incorporation of routing with placement, where the router estimates congestion and feeds this information to the placer. In turn, the emphasis on runtime is heightened, as the router will be invoked multiple times. Empirically, our placement-and-route framework significantly improves the final solution’s routability than performing the steps sequentially. To further enhance routability-driven placement, we (i) leverage incrementality to generate fast and accurate congestion maps, and (ii) develop several techniques to relieve cell-based and layout-based congestion. To broaden the scope of routing, we integrate a global router in a chip-design flow that addresses the buffer explosion problem.PHDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/98025/1/jinhu_1.pd

Placement and routing for reconfigurable systems.

Applications using reconfigurable logic have been widely demonstrated to offer better performance over software-based solutions. However, good performance rating is often destroyed by poor reconfiguration latency - time required to reconfigure hardware to perform the new task. Recent research focus on design automation techniques to address reconfiguration latency bottleneck. The contribution to novelty of this thesis is in new placement and routing techniques resulting in minimising reconfiguration latency of reconfigurable systems. This presents a part of design process concerned with positioning and connecting design blocks in a logic gate array. The aim of the research is to optimise the placement and interconnect strategy such that dynamic changes in system functionality can be achieved with minimum delay. A review of previous work in the field is given and the relevant theoretical framework developed. The dynamic reconfiguration problem is analysed for various reconfigurable technologies. Several algorithms are developed and evaluated using a representative set of problem domains to assess their effectiveness. Results obtained with novel placement and routing techniques demonstrate configuration data size reduction leading to significant reconfiguration latency improvements

Efficient quadratic placement for FPGAs.

Field Programmable Gate Arrays (FPGAs) are widely used in industry because they can implement any digital circuit on site simply by specifying programmable logic and their interconnections. However, this rapid prototyping advantage may be adversely affected because of the long compile time, which is dominated by placement and routing. This issue is of great importance, especially as the logic capacities of FPGAs continue to grow. This thesis focuses on the placement phase of FPGA Computer Aided Design (CAD) flow and presents a fast, high quality, wirelength-driven placement algorithm for FPGAs that is based on the quadratic placement approach. In this thesis, multiple iterations of equation solving process together with a linear wirelength reduction technique are introduced. The proposed algorithm efficiently handles the main problems with the quadratic placement algorithm and produces a fast and high quality placement. Experimental results, using twenty benchmark circuits, show that this algorithm can achieve comparable total wirelength and, on average, 5X faster run time when compared to an existing, state-of-the-art placement tool. This thesis also shows that the proposed algorithm delivers promising preliminary results in minimizing the critical path delay while maintaining high placement quality.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .X86. Source: Masters Abstracts International, Volume: 44-04, page: 1946. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

An integrated placement and routing approach

As the feature size continues scaling down, interconnects become the major contributor of signal delay. Since interconnects are mainly determined by placement and routing, these two stages play key roles to achieve high performance. Historically, they are divided into two separate stages to make the problem tractable. Therefore, the routing information is not available during the placement process. Net models such as HPWL, are employed to approximate the routing to simplify the placement problem. However, the good placement in terms of these objectives may not be routable at all in the routing stage because different objectives are optimized in placement and routing stages. This inconsistancy makes the results obtained by the two-step optimization method far from optimal;In order to achieve high-quality placement solution and ensure the following routing, we propose an integrated placement and routing approach. In this approach, we integrate placement and routing into the same framework so that the objective optimized in placement is the same as that in routing. Since both placement and routing are very hard problems (NP-hard), we need to have very efficient algorithms so that integrating them together will not lead to intractable complexity;In this dissertation, we first develop a highly efficient placer - FastPlace 3.0 for large-scale mixed-size placement problem. Then, an efficient and effective detailed placer - FastDP is proposed to improve global placement by moving standard cells in designs. For high-degree nets in designs, we propose a novel performance-driven topology design algorithm to generate good topologies to achieve very strict timing requirement. In the routing phase, we develop two global routers, FastRoute and FastRoute 2.0. Compared to traditional global routers, they can generate better solutions and are two orders of magnitude faster. Finally, based on these efficient and high-quality placement and routing algorithms, we propose a new flow which integrates placement and routing together closely. In this flow, global routing is extensively applied to obtain the interconnect information and direct the placement process. In this way, we can get very good placement solutions with guaranteed routability

On the Use of Directed Moves for Placement in VLSI CAD

Search-based placement methods have long been used for placing integrated circuits targeting the field programmable gate array (FPGA) and standard cell design styles. Such methods offer the potential for high-quality solutions but often come at the cost of long run-times compared to alternative methods. This dissertation examines strategies for enhancing local search heuristics---and in particular, simulated annealing---through the application of directed moves. These moves help to guide a search-based optimizer by focusing efforts on states which are most likely to yield productive improvement, effectively pruning the size of the search space. The engineering theory and implementation details of directed moves are discussed in the context of both field programmable gate array and standard cell designs. This work explores the ways in which such moves can be used to improve the quality of FPGA placements, improve the robustness of floorplan repair and legalization methods for mixed-size standard cell designs, and enhance the quality of detailed placement for standard cell circuits. The analysis presented herein confirms the validity and efficacy of directed moves, and supports the use of such heuristics within various optimization frameworks

Graphics Processing Unit-Based Computer-Aided Design Algorithms for Electronic Design Automation

The electronic design automation (EDA) tools are a specific set of software that play important roles in modern integrated circuit (IC) design. These software automate the design processes of IC with various stages. Among these stages, two important EDA design tools are the focus of this research: floorplanning and global routing. Specifically, the goal of this study is to parallelize these two tools such that their execution time can be significantly shortened on modern multi-core and graphics processing unit (GPU) architectures. The GPU hardware is a massively parallel architecture, enabling thousands of independent threads to execute concurrently. Although a small set of EDA tools can benefit from using GPU to accelerate their speed, most algorithms in this field are designed with the single-core paradigm in mind. The floorplanning and global routing algorithms are among the latter, and difficult to render any speedup on the GPU due to their inherent sequential nature. This work parallelizes the floorplanning and global routing algorithm through a novel approach and results in significant speedups for both tools implemented on the GPU hardware. Specifically, with a complete overhaul of solution space and design space exploration, a GPU-based floorplanning algorithm is able to render 4-166X speedup, while achieving similar or improved solutions compared with the sequential algorithm. The GPU-based global routing algorithm is shown to achieve significant speedup against existing state-of-the-art routers, while delivering competitive solution quality. Importantly, this parallel model for global routing renders a stable solution that is independent from the level of parallelism. In summary, this research has shown that through a design paradigm overhaul, sequential algorithms can also benefit from the massively parallel architecture. The findings of this study have a positive impact on the efficiency and design quality of modern EDA design flow

Flow-based Partitioning and Fast Global Placement in Chip Design

VLSI placement is one of the major steps in the chip design process and an interesting subject of research in industry and academia. Recent chips consist of several millions of circuits connected by millions of nets. The classical placement objective of finding positions for circuits and minimizing netlength among them is an ongoing issue in optimization of chip performance. The increasing instance sizes, the tightness of timing and routability constraints impose a real challenge to the design flows and the designers, which often cannot be addressed properly without considering them explicitly within the placement. Many of the complex design methodologies follow an iterative approach, using placement several times in this process. Thus, placement runtime has a severe impact on the turnaround time in chip development. The major contributios of this thesis deal with the global placement, a common relaxation of the placement problem, which computes rough positions of the circuits minimizing the total length of wires to interconnect the. Based on the idea of subsequent quadratic netlength minimization and partitioning, as in BonnPlace [BrennerStruzynaVygen:2008], we present several new algorithms, generalized data structures and a completely new implementation of this top-down placement scheme. We introduce and formalize the concept of movebounds which are position constraints on subsets of cells. Movebounds, which can be regarded as mandatory or soft constraints, provide a mechanism to explicitly incorporate movement constraints to the placement which result from issues of timing, power and routability. With inclusive movebounds, such restrictions can be assigned to groups of circuits without any influence to other placeable objects. The other constraints, namely the exclusive movebounds, are of particular interest for semi-hierarchical approaches, as they can be used to obtain a flat view of the design and prevent cells from being placed into hierarchy units. Both provide a toolbox to the designer and allow the control of particular circuit sets without netlist manipulations. We also present a top-down partitioning scheme and extend the legalization algorithm of [BrennerVygen:2004] to be able to deal with millions of cells and dozens of movebounds efficiently. The presented algorithm can handle different types of overlapping movebounds, even in legalization, and produces significantly better results than a modern industrial tool. We present a novel partitioning algorithm for global placement. Unlike previous iterative and recursive approaches, the new method provides a global view of the problem using a novel MinCostFlow model with extremely fast and highly parallelizable local realization steps. The new flow-based partitioning can address density targets much more accurately and lowers the risk of density violations. The presented MinCostFlow model does not depend on the number of cells, making it highly interesting for large and huge designs. Moreover, the embedded flow structure responds to the chip's floorplan much better than the classical global partitioning approach. Another significant advantage of this algorithm is the fact that it can be applied to any initial placement and guarantees a feasible (fractional) solution (if one exists), improving the tool's reliability, even with movebounds and starting from placements with significant density violations. Using this method we can extend the congestion-driven placement to a combined movement, density adjustment, and cell size inflation approach. This method is able to handle movebounds and guarantees to resolve density overloads properly. Flow-based partitioning creates the opportunity of applying local, density unaware, optimization steps within global placement and allows it to break the strict recursive structure of levels and save runtime. The extended flexibility and runtime improvement are not the only advantages. The proposed flow realization, which is a combination of local quadratic programs and local partitioning, does not only yield a runtime improvement, but also seems to merge connectivity information to partitioning in a much better way than the old recursive partitioning approach. The new flow-based partitioning helps to significantly improve the results of our placement also in terms of netlength. We provide fast data structures for hierarchically clustered netlists and extend the net models Clique and Star to be applied within the clustered netlists efficiently. We show how shared-memory parallelization can be used for speeding up various routines in placement, without the loss of repeatability. In addition, we commit ourselves to the clustering problem, finding circuit groups which should be placed in the vicinity of each other. In order to provide global information for a fast bottom-up clustering, we propose to incorporate connectivity information using random walks. To this end, we show how the hitting times can be efficiently retrieved from large netlist hypergraphs. Due to the proposed model, parallel computation on sparse, shared-memory matrices can be used for computing hitting times to several targets simultaneously. Combined with a bottom-up clustering, even our preliminary approach significantly outperforms the popular BestChoice} algorithm [Nam et al. 2005]. We conclude this thesis by providing several experimental results on a large testbed of real-world chips and benchmarks demonstrating the performance of our tool. Without movebounds, our tool performs as good as a state-of-the-art force directed placer, but is more than 5x faster. We achieve the same speedup over the old BonnPlace, but produce significantly better results, on average more than 8%. With movebounds, our placements are more than 30% shorter compairing to the force-directed placer and our tool is 9x-20x faster. Our tool also produces the best results on the latest ISPD 2006 placement benchmarks