202 research outputs found
Improving the Spectral Efficiency of Nonlinear Satellite Systems through Time-Frequency Packing and Advanced Processing
We consider realistic satellite communications systems for broadband and
broadcasting applications, based on frequency-division-multiplexed linear
modulations, where spectral efficiency is one of the main figures of merit. For
these systems, we investigate their ultimate performance limits by using a
framework to compute the spectral efficiency when suboptimal receivers are
adopted and evaluating the performance improvements that can be obtained
through the adoption of the time-frequency packing technique. Our analysis
reveals that introducing controlled interference can significantly increase the
efficiency of these systems. Moreover, if a receiver which is able to account
for the interference and the nonlinear impairments is adopted, rather than a
classical predistorter at the transmitter coupled with a simpler receiver, the
benefits in terms of spectral efficiency can be even larger. Finally, we
consider practical coded schemes and show the potential advantages of the
optimized signaling formats when combined with iterative detection/decoding.Comment: 8 pages, 8 figure
Iterative pre-distortion of the non-linear satellite channel
Digital Video Broadcasting - Satellite - Second Generation (DVB-S2) is the
current European standard for satellite broadcast and broadband communications.
It relies on high order modulations up to 32-amplitude/phase-shift-keying
(APSK) in order to increase the system spectral efficiency. Unfortunately, as
the modulation order increases, the receiver becomes more sensitive to physical
layer impairments, and notably to the distortions induced by the power
amplifier and the channelizing filters aboard the satellite. Pre-distortion of
the non-linear satellite channel has been studied for many years. However, the
performance of existing pre-distortion algorithms generally becomes poor when
high-order modulations are used on a non-linear channel with a long memory. In
this paper, we investigate a new iterative method that pre-distorts blocks of
transmitted symbols so as to minimize the Euclidian distance between the
transmitted and received symbols. We also propose approximations to relax the
pre-distorter complexity while keeping its performance acceptable
Linearisation, error correction coding and equalisation for multi-level modulation schemes
University of Technology, Sydney. Faculty of Engineering.Orthogonal frequency division multiplexing (OFDM) has been standardised for digital audio broadcasting (DAB), digital video broadcasting (DVB) and wireless local area networks (WLAN). OFDM systems are capable of effectively coping with frequency- selective fading without using complex equalisation structures. The modulation and demodulation processes using fast fourier transform (FFT) and its inverse (IFFT) can be implemented very efficiently. More recently, multicarrier code division multiple access (MC-CDMA) based on the combination of OFDM and conventional CDMA has received growing attention in the field of wireless personal communication and digital multimedia broadcasting. It can cope with channel frequency selectivity due to its own capabilities of overcoming the asynchronous nature of multimedia data traffic and higher capacity over conventional multiple access techniques.
On the other hand, multicarrier modulation schemes are based on the transmission of a given set of signals on large numbers of orthogonal subcarriers. Due to the fact that the multicarrier modulated (MCM) signal is a superposition of many amplitude modulated sinusoids, its probability density function is nearly Gaussian. Therefore, the MCM signal is characterised by a very high peak-to-average power ratio (PAPR). As a result of the high PAPR, the MCM signal is severely distorted when a nonlinear high power amplifier (HPA) is employed to obtain sufficient transmitting power. This is very common in most communication systems, and decreases the performance significantly. The simplest way to avoid the nonlinear distortion is substantial output backoff (OBO) operating in the linear region of the HPA. However, because of the high OBO, the peak transmit power has to be decreased. For this reason, many linearisation techniques have been proposed to compensate for the nonlinearity without applying high OBO. The predistortion techniques have been known and studied as one of the most promising means to solve the problem. In this thesis, an improved memory mapping predistortion technique devised to reduce the large computational complexity of a fixed point iterative (FPI) predistorter is proposed, suitable especially for multicarrier modulation schemes. The proposed memory mapping predistortion technique is further extended to compensate for nonlinear distortion with memory caused by a shaping linear filter. The case of varying HPA characteristics is also considered by using an adaptive memory mapping predistorter which updates the lookup table (LUT) and counteracts these variations. Finally, an amplitude memory mapping predistorter is presented to reduce the LUT size.
Channel coding techniques have been widely used as an effective solution against channel fading in wireless environments. Amongst these, particular attention has been paid to turbo codes due to their performance being close to the Shannon limit. In-depth study and evaluation of turbo coding has been carried out for constant envelope signaling systems such as BPSK, QPSK and M-ary PSK. In this thesis, the performance of TTCM-OFDM systems with high-order modulation schemes, e.g. 16-QAM and 64-QAM, is investigated and compared with conventional channel coding schemes such as Reed-Solomon and convolutional coding. The analysis is performed in terms of spectral efficiency over a multipath fading channel and in presence of an HPA. Maximum a-priori probability (MAP), soft output Viterbi algorithm (SOVA) and pragmatic algorithms are compared for non-binary turbo decoding with these systems. For this setup, iterative multiuser detection in TTCM/MC-CDMA systems with M-QAM is introduced and investigated, adopting a set of random codes to decrease the PAPR. As another application of TTCM, the performance of multicode CDMA systems with TTCM for outer coding over multipath fading channels is investigated
Advanced techniques for spectrally efficient DVB-S2X systems
We investigate different techniques to improve the spectral efficiency of systems based on the DVB-S2 standard, when the transmitted signal bandwidth cannot be increased because it has already been optimized to the maximum value allowed by transponder filters. We will investigate and compare several techniques to involve different sections of the transceiver scheme. The techniques that will be considered include the use of advanced detection algorithms, the adoption of time packing, and the optimization of the constellation and shaping pulses. The LDPC codes recently proposed for the evolution of the DVB-S2 standard will be considered, as well as the adoption of iterative detection and decoding. Information theoretical analysis will be followed by the study of practical modulation and coding schemes
Advanced transceivers for spectrally-efficient communications
In this thesis, we will consider techniques to improve the spectral
efficiency of digital communication systems, operating on the whole transceiver
scheme. First, we will focus on receiver schemes having detection algorithms
with a complexity constraint. We will optimize the parameters of the reduced
detector with the aim of maximizing the achievable information rate. Namely, we
will adopt the channel shortening technique. Then, we will focus on a technique
that is getting very popular in the last years (although presented for the
first time in 1975): faster-than-Nyquist signaling, and its extension which is
time packing. Time packing is a very simple technique that consists in
introducing intersymbol interference on purpose with the aim of increasing the
spectral efficiency of finite order constellations. Finally, in the last
chapters we will combine all the presented techniques, and we will consider
their application to satellite channels.Comment: PhD Thesi
Non-linearized amplifier and advanced mitigation techniques: DVB-S2X spectral efficiency improvement
The latest standardization DVB-S2X increases the achievable spectral efficiency of the satellite communications by around 15% in AWGN channel. In order to benefit from those improvements, the strong non-linear distortions introduced by the payload have to be overcome, mostly taking high back-off on the amplifier operation point. Nowadays, on- board amplifiers are linearized before being deployed, allowing low-complexity transmitters and receivers at the detriment of the payload's cost and reduced energy efficiency. In this paper, various techniques are investigated for the purpose of spectral efficiency improvement while releasing the amplifier linearization constraint. Iterative pre-distortion at the transmitter, turbo- equalization at the receiver and appropriate waveforms for transmission through non-linearized payload appear as strong candidates considering the results of this study
- …