2,489 research outputs found

    High efficiency, low distortion 3D diffusion tensor imaging with variable density spiral fast spin echoes (3D DW VDS RARE)

    Get PDF
    We present an acquisition and reconstruction method designed to acquire high resolution 3D fast spin echo diffusion tensor images while mitigating the major sources of artifacts in DTI-field distortions, eddy currents and motion. The resulting images, being 3D, are of high SNR, and being fast spin echoes, exhibit greatly reduced field distortions. This sequence utilizes variable density spiral acquisition gradients, which allow for the implementation of a self-navigation scheme by which both eddy current and motion artifacts are removed. The result is that high resolution 3D DTI images are produced without the need for eddy current compensating gradients or B_0 field correction. In addition, a novel method for fast and accurate reconstruction of the non-Cartesian data is employed. Results are demonstrated in the brains of normal human volunteers

    Acquisition and Reconstruction Techniques for Fat Quantification Using Magnetic Resonance Imaging

    Get PDF
    Quantifying the tissue fat concentration is important for several diseases in various organs including liver, heart, skeletal muscle and kidney. Uniquely, MRI can separate the signal from water and fat in-vivo, rendering it the most suitable imaging modality for non-invasive fat quantification. Chemical-shift-encoded MRI is commonly used for quantitative fat measurement due to its unique ability to generate a separate image for water and fat. The tissue fat concentration can be consequently estimated from the two images. However, several confounding factors can hinder the water/fat separation process, leading to incorrect estimation of fat concentration. The inhomogeneities of the main magnetic field represent the main obstacle to water/fat separation. Most existing techniques rely mainly on imposing spatial smoothness constraints to address this problem; however, these often fail to resolve large and abrupt variations in the magnetic field. A novel convex relaxation approach to water/fat separation is proposed. The technique is compared to existing methods, demonstrating its robustness to resolve abrupt magnetic field inhomogeneities. Water/fat separation requires the acquisition of multiple images with different echo-times, which prolongs the acquisition time. Bipolar acquisitions can efficiently acquire the required data in shorter time. However, they induce phase errors that significantly distort the fat measurements. A new bipolar acquisition strategy that overcomes the phase errors and provides accurate fat measurements is proposed. The technique is compared to the current clinical sequence, demonstrating its efficiency in phantoms and in-vivo experiments. The proposed acquisition technique is also applied on animal models to achieve higher spatial resolution than the current sequence. In conclusion, this dissertation describes a complete framework for accurate and precise MRI fat quantification. Novel acquisitions and reconstruction techniques that address the current challenges for fat quantification are proposed

    Acquisition strategies for fat/water separated MRI

    Get PDF
    This thesis focuses on new ways to more efficiently acquire the signal for fat/water separated MRI, also known as Dixon methods. In paper I, the concept of dual bandwidths was introduced to improve SNR efficiency by removing dead times in a spin echo PROPELLER sequence. By correcting for the displacement of fat, we were able to improve the motion correction. This required additional considerations during reconstruction in order to avoid noise amplification, which was solved with a noise-whitening Tikhonov regularization. Paper II explores the combination of fat/water separation in k-space with partially acquired data, i.e. partial Fourier sampling. With reduced sampling coverage comes the ability of increased spatial resolution, which is often limited in fat/water imaging, particularly in gradient echo sequences. A modified POCS routine was also developed with real-valued estimates, exploiting Hermitian symmetry to improve the inverse problem conditioning in the fully sampled region. A single-TR dual-bandwidth RARE (fast/turbo spin echo) sequence without dead times was developed in Paper III, which uses partial Fourier sampling with late and early echoes to improve the chemical shift encoding. The proposed sequence can acquire images with 0.5 mm in-plane resolution without dead times, with image quality exceeding current state-of-the-art techniques. An automated selection of gradient waveforms based on Cramér-Rao bounds was implemented on the scanner. In Paper IV, the dual-bandwidth concept was generalized to continuous bandwidths. Instead of the conventional shift of a trapezoidal readout gradient, we describe a new method of encoding chemical shift by using asymmetric readout waveforms. Asymmetric readouts were implemented in a RARE sequence to completely remove dead times from multi-TR acquisitions, with typical scan time reductions of 25 %. The developed methods enable fat/water imaging with reduced scan times and increased spatial resolution, which has previously limited their use

    Fast Absolute Quantification of In Vivo Water and Fat Content with Magnetic Resonance Imaging

    Get PDF
    Quantitative water fat imaging offers a non-invasive method for monitoring and staging diseases associated with changes in either water or fat content in tissue. In this work absolute water and fat mass density measurement with in vivo Magnetic Resonance Imaging (MRI) is demonstrated. T1 independent, T2* corrected chemical shift based water-fat separated images are acquired. By placing a phantom with known mass density in the field of view for signal intensity calibration, absolute water or fat mass density can be computed, assuming the B1+ (transmit) and B1- (receive) fields can be measured. Phantom experiments with known water fat concentration were conducted to validate the feasibility of proposed method and in vivo data was collected from healthy volunteers. Results show good agreement with known values of in vivo water density. Each measurement was within one breath hold. Fast absolute quantification of water and fat with MRI is feasible in the abdomen

    Fast joint reconstruction of dynamic R2∗R_2^* and field maps in functional MRI.

    Full text link
    Blood oxygen level dependent (BOLD) functional magnetic resonance imaging (fMRI) is conventionally done by reconstructing T2 * -weighted images. However, since the images are unitless they are nonquantifiable in terms of important physiological parameters. An alternative approach is to reconstruct R2 * maps which are quantifiable and have comparable BOLD contrast as T2* -weighted images. However, conventional R2 * mapping involves long readouts and ignores relaxation during readout. Another problem with fMRI imaging is temporal drift/fluctuations in off-resonance. Conventionally, a field map is collected at the start of the fMRI study to correct for off-resonance, ignoring any temporal changes. Here, we propose a new fast regularized iterative algorithm that jointly reconstructs R2 * and field maps for all time frames in fMRI data. To accelerate the algorithm we linearize the MR signal model, enabling the use of fast regularized iterative reconstruction methods. The regularizer was designed to account for the different resolution properties of both R2 * and field maps and provide uniform spatial resolution. For fMRI data with the same temporal frame rate as data collected for T2 * -weighted imaging the resulting R2 * maps performed comparably to T2 * -weighted images in activation detection while also correcting for spatially global and local temporal changes in off-resonance.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/86002/1/Fessler23.pd
    • 

    corecore