Research and developments of distributed video coding

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The recent developed Distributed Video Coding (DVC) is typically suitable for the applications such as wireless/wired video sensor network, mobile camera etc. where the traditional video coding standard is not feasible due to the constrained computation at the encoder. With DVC, the computational burden is moved from encoder to decoder. The compression efficiency is achieved via joint decoding at the decoder. The practical application of DVC is referred to Wyner-Ziv video coding (WZ) where the side information is available at the decoder to perform joint decoding. This join decoding inevitably causes a very complex decoder. In current WZ video coding issues, many of them emphasise how to improve the system coding performance but neglect the huge complexity caused at the decoder. The complexity of the decoder has direct influence to the system output. The beginning period of this research targets to optimise the decoder in pixel domain WZ video coding (PDWZ), while still achieves similar compression performance. More specifically, four issues are raised to optimise the input block size, the side information generation, the side information refinement process and the feedback channel respectively. The transform domain WZ video coding (TDWZ) has distinct superior performance to the normal PDWZ due to the exploitation in spatial direction during the encoding. However, since there is no motion estimation at the encoder in WZ video coding, the temporal correlation is not exploited at all at the encoder in all current WZ video coding issues. In the middle period of this research, the 3D DCT is adopted in the TDWZ to remove redundancy in both spatial and temporal direction thus to provide even higher coding performance. In the next step of this research, the performance of transform domain Distributed Multiview Video Coding (DMVC) is also investigated. Particularly, three types transform domain DMVC frameworks which are transform domain DMVC using TDWZ based 2D DCT, transform domain DMVC using TDWZ based on 3D DCT and transform domain residual DMVC using TDWZ based on 3D DCT are investigated respectively. One of the important applications of WZ coding principle is error-resilience. There have been several attempts to apply WZ error-resilient coding for current video coding standard e.g. H.264/AVC or MEPG 2. The final stage of this research is the design of WZ error-resilient scheme for wavelet based video codec. To balance the trade-off between error resilience ability and bandwidth consumption, the proposed scheme emphasises the protection of the Region of Interest (ROI) area. The efficiency of bandwidth utilisation is achieved by mutual efforts of WZ coding and sacrificing the quality of unimportant area. In summary, this research work contributed to achieves several advances in WZ video coding. First of all, it is targeting to build an efficient PDWZ with optimised decoder. Secondly, it aims to build an advanced TDWZ based on 3D DCT, which then is applied into multiview video coding to realise advanced transform domain DMVC. Finally, it aims to design an efficient error-resilient scheme for wavelet video codec, with which the trade-off between bandwidth consumption and error-resilience can be better balanced

Performance improvement of segmentation-based depth representation in 3D imagery by region merging

The feasible implementation of immersive 3D video systems entails the need for a substantial reduction in the amount of image information necessary for representation. Multiview image rendering algorithms based on depth data have radically reduced the number of images required to reconstruct a 3D scene. Nonetheless, the compression of depth maps still poses several challenges due to the particular nature and characteristics of the data. To this end, this paper outlines a depth representation technique, developed in our earlier work, that exploits the correlation intrinsically present between color intensity and depth images capturing a natural scene. In this technique, a segmentation-based algorithm that is backwards compatible with conventional video coding systems is implemented. The effectiveness of our previous technique is enhanced in this contribution by a region merging process on the segmented regions, which results in a decrease in the amount of information necessary for transmission or storage of multiview image data by a factor of 20.5 with respect to the reference H.264/AVC coding methodology. This is furthermore achieved whilst maintaining a 3D image reconstruction and viewing quality which is quasi identical to the referenced approach.peer-reviewe

Selected topics on distributed video coding

Distributed Video Coding (DVC) is a new paradigm for video compression based on the information theoretical results of Slepian and Wolf (SW), and Wyner and Ziv (WZ). While conventional coding has a rigid complexity allocation as most of the complex tasks are performed at the encoder side, DVC enables a flexible complexity allocation between the encoder and the decoder. The most novel and interesting case is low complexity encoding and complex decoding, which is the opposite of conventional coding. While the latter is suitable for applications where the cost of the decoder is more critical than the encoder's one, DVC opens the door for a new range of applications where low complexity encoding is required and the decoder's complexity is not critical. This is interesting with the deployment of small and battery-powered multimedia mobile devices all around in our daily life. Further, since DVC operates as a reversed-complexity scheme when compared to conventional coding, DVC also enables the interesting scenario of low complexity encoding and decoding between two ends by transcoding between DVC and conventional coding. More specifically, low complexity encoding is possible by DVC at one end. Then, the resulting stream is decoded and conventionally re-encoded to enable low complexity decoding at the other end. Multiview video is attractive for a wide range of applications such as free viewpoint television, which is a system that allows viewing the scene from a viewpoint chosen by the viewer. Moreover, multiview can be beneficial for monitoring purposes in video surveillance. The increased use of multiview video systems is mainly due to the improvements in video technology and the reduced cost of cameras. While a multiview conventional codec will try to exploit the correlation among the different cameras at the encoder side, DVC allows for separate encoding of correlated video sources. Therefore, DVC requires no communication between the cameras in a multiview scenario. This is an advantage since communication is time consuming (i.e. more delay) and requires complex networking. Another appealing feature of DVC is the fact that it is based on a statistical framework. Moreover, DVC behaves as a natural joint source-channel coding solution. This results in an improved error resilience performance when compared to conventional coding. Further, DVC-based scalable codecs do not require a deterministic knowledge of the lower layers. In other words, the enhancement layers are completely independent from the base layer codec. This is called the codec-independent scalability feature, which offers a high flexibility in the way the various layers are distributed in a network. This thesis addresses the following topics: First, the theoretical foundations of DVC as well as the practical DVC scheme used in this research are presented. The potential applications for DVC are also outlined. DVC-based schemes use conventional coding to compress parts of the data, while the rest is compressed in a distributed fashion. Thus, different conventional codecs are studied in this research as they are compared in terms of compression efficiency for a rich set of sequences. This includes fine tuning the compression parameters such that the best performance is achieved for each codec. Further, DVC tools for improved Side Information (SI) and Error Concealment (EC) are introduced for monoview DVC using a partially decoded frame. The improved SI results in a significant gain in reconstruction quality for video with high activity and motion. This is done by re-estimating the erroneous motion vectors using the partially decoded frame to improve the SI quality. The latter is then used to enhance the reconstruction of the finally decoded frame. Further, the introduced spatio-temporal EC improves the quality of decoded video in the case of erroneously received packets, outperforming both spatial and temporal EC. Moreover, it also outperforms error-concealed conventional coding in different modes. Then, multiview DVC is studied in terms of SI generation, which differentiates it from the monoview case. More specifically, different multiview prediction techniques for SI generation are described and compared in terms of prediction quality, complexity and compression efficiency. Further, a technique for iterative multiview SI is introduced, where the final SI is used in an enhanced reconstruction process. The iterative SI outperforms the other SI generation techniques, especially for high motion video content. Finally, fusion techniques of temporal and inter-view side informations are introduced as well, which improves the performance of multiview DVC over monoview coding. DVC is also used to enable scalability for image and video coding. Since DVC is based on a statistical framework, the base and enhancement layers are completely independent, which is an interesting property called codec-independent scalability. Moreover, the introduced DVC scalable schemes show a good robustness to errors as the quality of decoded video steadily decreases with error rate increase. On the other hand, conventional coding exhibits a cliff effect as the performance drops dramatically after a certain error rate value. Further, the issue of privacy protection is addressed for DVC by transform domain scrambling, which is used to alter regions of interest in video such that the scene is still understood and privacy is preserved as well. The proposed scrambling techniques are shown to provide a good level of security without impairing the performance of the DVC scheme when compared to the one without scrambling. This is particularly attractive for video surveillance scenarios, which is one of the most promising applications for DVC. Finally, a practical DVC demonstrator built during this research is described, where the main requirements as well as the observed limitations are presented. Furthermore, it is defined in a setup being as close as possible to a complete real application scenario. This shows that it is actually possible to implement a complete end-to-end practical DVC system relying only on realistic assumptions. Even though DVC is inferior in terms of compression efficiency to the state of the art conventional coding for the moment, strengths of DVC reside in its good error resilience properties and the codec-independent scalability feature. Therefore, DVC offers promising possibilities for video compression with transmission over error-prone environments requirement as it significantly outperforms conventional coding in this case

A content-aware quantisation mechanism for transform domain distributed video coding

The discrete cosine transform (DCT) is widely applied in modern codecs to remove spatial redundancies, with the resulting DCT coefficients being quantised to achieve compression as well as bit-rate control. In distributed video coding (DVC) architectures like DISCOVER, DCT coefficient quantisation is traditionally performed using predetermined quantisation matrices (QM), which means the compression is heavily dependent on the sequence being coded. This makes bit-rate control challenging, with the situation exacerbated in the coding of high resolution sequences due to QM scarcity and the non-uniform bit-rate gaps between them. This paper introduces a novel content-aware quantisation (CAQ) mechanism to overcome the limitations of existing quantisation methods in transform domain DVC. CAQ creates a frame-specific QM to reduce quantisation errors by analysing the distribution of DCT coefficients. In contrast to the predetermined QM that is applicable to only 4x4 block sizes, CAQ produces QM for larger block sizes to enhance compression at higher resolutions. This provides superior bit-rate control and better output quality by seeking to fully exploit the available bandwidth, which is especially beneficial in bandwidth constrained scenarios. In addition, CAQ generates superior perceptual results by innovatively applying different weightings to the DCT coefficients to reflect the human visual system. Experimental results corroborate that CAQ both quantitatively and qualitatively provides enhanced output quality in bandwidth limited scenarios, by consistently utilising over 90% of available bandwidth

Graph Spectral Image Processing

Recent advent of graph signal processing (GSP) has spurred intensive studies of signals that live naturally on irregular data kernels described by graphs (e.g., social networks, wireless sensor networks). Though a digital image contains pixels that reside on a regularly sampled 2D grid, if one can design an appropriate underlying graph connecting pixels with weights that reflect the image structure, then one can interpret the image (or image patch) as a signal on a graph, and apply GSP tools for processing and analysis of the signal in graph spectral domain. In this article, we overview recent graph spectral techniques in GSP specifically for image / video processing. The topics covered include image compression, image restoration, image filtering and image segmentation

Channel Optimized Distributed Multiple Description Coding

In this paper, channel optimized distributed multiple description vector quantization (CDMD) schemes are presented for distributed source coding in symmetric and asymmetric settings. The CDMD encoder is designed using a deterministic annealing approach over noisy channels with packet loss. A minimum mean squared error asymmetric CDMD decoder is proposed for effective reconstruction of a source, utilizing the side information (SI) and its corresponding received descriptions. The proposed iterative symmetric CDMD decoder jointly reconstructs the symbols of multiple correlated sources. Two types of symmetric CDMD decoders, namely the estimated-SI and the soft-SI decoders, are presented which respectively exploit the reconstructed symbols and a posteriori probabilities of other sources as SI in iterations. In a multiple source CDMD setting, for reconstruction of a source, three methods are proposed to select another source as its SI during the decoding. The methods operate based on minimum physical distance (in a wireless sensor network setting), maximum mutual information and minimum end-to-end distortion. The performance of the proposed systems and algorithms are evaluated and compared in detail.Comment: Submitted to IEEE Transaction on Signal Processin