45,292 research outputs found

    Charakterizace tenkovrstvých elektroluminiscenčních součástek

    Get PDF
    Jádrem této disertační práce bylo studovat optické a elektrické charakteristiky tenkovrstvých elektroluminiscenčních součástek řízených střídavým proudem (ACTFEL) a zejména vliv procesu stárnutí luminiforů na jejich optické a elektrické vlastnosti. Cílem této studie měl být příspěvek ke zvýšení celkové účinnosti luminoforů, vyjádřené pomocí jasu, účinnosti a stability. Vzhledem k tomu, že současnou dominantní technologií plochých obrazovek je LCD, musí se další alternativní technologie plošných displejů porovnávat s LCD. Výhodou ACTFEL displejů proti LCD je lepší rozlišení, větší teplotní rozsah činnosti, větší čtecí úhel, či možnost čtení při mnohem vyšší intenzitě pozadí. Na druhou stranu je jejich nevýhodou vyšší energetická náročnost, problém s odpovídající barevností tří základních barev a podstatně vyšší napětí nutné pro činnost displeje. K dosažení tohoto cíle jsme provedli optická, elektrická a optoelektrická měření ACTFEL struktur a ZnS:Mn luminoforů. Navíc jsme studovali vliv dotování vrstvy pomocí KCl na chování mikrostruktury a na elektroluminiscenční vlastnosti (zejména na jas a světelnou účinnost) ZnS:Mn luminoforů. Provedli jsme i některá, ne zcela obvyklá, měření ACTFEL součástek. Vypočítali jsme i rozptylový poměr nabitých barevných center a simulovali transportní charakteristiky v ACTFEL součástkách. Studovali jsme vliv stárnutí dvou typů ZnS:Mn luminoforů (s vrstvou napařenou či získanou pomocí epitaxe atomových vrstev) monitorováním závislostí svítivost-napětí (L-V), velikost vnitřního náboje - elektrické pole luminoforu (Q-Fp) a kapacitance-napětí (C-V) ve zvolených časových intervalech v průběhu stárnutí. Provedli jsme krátkodobá i dlouhodobá měření a pokusili jsme se i o vizualizaci struktury luminoforu se subvlnovým rozlišením pomocí optického rastrovacího mikroskopu pracujícího v blízkém poli (SNOM). Na praktickém případu zeleného Zn2GeO4:Mn (2% Mn) ACTFEL displeje, pracujícího při 50 Hz, jsme také studovali stabilitu svítivosti pomocí měření závislosti svítivosti na napětí (L-V) a světelné účinnosti na napětí (eta-V). Přitom byl zhodnocen význam těchto charakteristik. Nezanedbatelnou a neoddělitelnou součástí této práce je i její pedagogický aspekt. Předložený text by mohl být využit i jako učebnice pro studenty na mé univerzitě v Lybii.The objective of this thesis is to study the optical and electrical characterization of Alternating-Current Thin-Film ElectroLuminescent (ACTFEL) devices, and specifically the aging process of phosphor materials that comprise the ACTFEL display in an effort to improve the overall performance of the primary phosphor colors in terms of brightness, efficiency and stability. Since the dominant flat-panel display technology is the LCD, an alternative flat-panel display technology must gauge itself in terms of the LCD. The advantages of ACTFEL displays in comparison with LCDs are the ability to pattern much smaller pixel, performance over a wider temperature range, full-viewing angle, and readability with much greater intensity background light. The disadvantages of ACTFEL displays against LCD ones are larger power consumption, lack of adequate chromaticity of the three primary colors, and much larger driving voltages. To achieve these objectives, the optical, electrical, and opto-electric measurements of the ACTFEL structures and ZnS:Mn phosphor hosts were carried out. Moreover, the effect of KCl co-doping on the microstructure and the electroluminescent properties (mainly brightness and luminous efficiency) of ZnS:Mn phosphors has been investigated, too. A non-common electrical characterization of ACTFEL devices has also been provided. We also calculated charged center scattering rates, and simulated the electron transport process in an ACTFEL device The study of the aging characteristics of evaporated and atomic layer epitaxy ZnS:Mn phosphors has been undertaken by monitoring the luminance-voltage (L-V) internal charge-phosphor field (Q-Fp) and capacitance-voltage (C-V) electrical characteristics at in selected time intervals during aging. Short-term and long-term ACTFEL aging studies has been provided and an attempt to visualize locally the structure of phosphor with a subwavelenght resolution using Scanning near-field optical microscope (SNOM) has also been presented. The practical case of a green Zn2GeO4:Mn (2% Mn) ACTFEL device operated at 50 Hz was studied and a luminance stability by a measurement of luminance-voltage (L-V) and luminous efficiency-voltage (eta-V) characteristics has been evaluated. A non-negligible and indiscreptible task of this thesis was also its pedagogical aspect. Therefore, the presented text can be considered as a textbook suitable for our students in Libya.

    An initial investigation into the low-cost manufacture of diffracting objects

    Get PDF
    In this letter we report on an initial investigation into the printing of diffracting objects via the high-speed, low-cost, printing process of offset-lithography, a method more commonly used in the printing of books and newspapers. A series of diffracting objects were printed onto clear substrates and evaluated with a coherent light source. The diffraction patterns generated correlate well with the Fourier transform of the printed image

    Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying

    Get PDF
    This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2011 ElsevierWhen developing sustainable building fabric technologies, it is essential that the energy use and CO2 burden arising from manufacture does not outweigh the respective in-use savings. This study investigates this paradigm by carrying out a streamlined life cycle assessment (LCA) of silica aerogel. This unique, nanoporous translucent insulation material has the lowest thermal conductivity of any solid, retaining up to four times as much heat as conventional insulation, whilst being highly transparent to light and solar radiation. Monolithic silica aerogel has been cited as the ‘holy grail’ of future glazing technology. Alternatively, translucent granular aerogel is now being produced on a commercial scale. In each case, many solvents are used in production, often accompanied by intensive drying processes, which may consume large amounts of energy and CO2. To date, there has been no peer-reviewed LCA of this material conducted to the ISO 14000 standard. Primary data for this ‘cradle-to-factory gate’ LCA is collected for silica aerogel made by low and high temperature supercritical drying. In both cases, the mass of raw materials and electricity usage for each process is monitored to determine the total energy use and CO2 burden. Findings are compared against the predicted operational savings arising from retrofitting translucent silica aerogel to a single glazed window to upgrade its thermal performance. Results should be treated as a conservative estimate as the aerogel is produced in a laboratory, which has not been developed for mass manufacture or refined to reduce its environmental impact. Furthermore, the samples are small and assumptions to upscale the manufacturing volume occur without major changes to production steps or equipment used. Despite this, parity between the CO2 burden and CO2 savings is achieved in less than 2 years, indicating that silica aerogel can provide a measurable environmental benefit.This work is funded by the EPSRC, Brunel University and Buro Happold Ltd, the University of Bath is funded by the EPSRC grant EP/F018622/1

    Light-induced switching in pDTE - FICO 1D photonic structures

    Full text link
    We propose the design of 1D photonic crystals and microcavities in which fluorine-indium codoped cadmium oxide (FICO) nanocrystal based layers and layers of diarylethene-based polyester (pDTE) are alternated or embedded in a microcavity. The irradiation with UV light results in two different behaviours: i) it dopes the FICO nanocrystals inducing a blue shift of their plasmonic resonances; ii) it changes the real part of the refractive index of the photochromic pDTE polymer. These two behaviours are combined in the proposed photonic structures and can be useful for switchable filters and cavities for light emission.Comment: 9 pages, 5 figure

    12CaO.7Al2O3 ceramic: A review of the electronic and optoelectronic applications in display devices

    Get PDF
    The alumina-based compound, 12CaO.7Al2O3, is a ceramic material with a unique cage-like lattice. Such a structure has enabled scientists to extract various new characteristics from this compound, most of which were unknown until quite recently. This compound has the ability to incorporate different anionic species and even electrons to the empty space inside its cages, thereby changing from an insulator into a conductive oxide. The cage walls can also incorporate different rare earth phosphor elements producing an oxide-based phosphor. All these characteristics are obtained without a significant change in the structure of the lattice. It is, therefore, reasonable to expect that this compound will receive attention as a potential material for display applications. This review article presents recent investigations into the application of 12CaO.7Al2O3 ceramic in various display devices, the challenges, opportunities and possible areas of future investigation into the development of this naturally abundant and environmental friendly material in the field of display.LP Displays Ltd, Blackburn, UK for partial funding of the studentship at Queen Mary, University of London. Dr Lesley Hanna of Wolfson Centre for Materials Processing, Brunel University Londo

    Indium tin oxide overlayered waveguides for sensor applications

    No full text
    The use of indium tin oxide (ITO) thin films as electrodes for integrated optical electrochemical sensor devices is discussed. The effect of various thicknesses of ITO overlayers exhibiting low resistivity and high transparency on potassium ion-exchanged waveguides fabricated in glass substrates is investigated over the wavelength range 500-900 nm. ITO overlayers are formed by reactive thermal evaporation in oxygen, followed by annealing in air to a maximum temperature of 320°C. With air as superstrate, losses in the waveguides were found to increase dramatically above 30nm ITO thickness for TE polarization, and above 50nm thickness for TM. Losses were increased over the whole wavelength range for a superstrate index close to that of water. A one-dimensional multilayer waveguide model is used in the interpretation of the experimental results

    Time-resolved transillumination of turbid media

    Get PDF
    The suitability and limits of time-resolved transillumination to determine inner details of biological tissues are investigated by phantom experiments. The achievable improvement is demonstrated by using different phantoms (absorbing objects embedded in a turbid medium). By means of line-scans across a sharp edge the spatial resolution and its dependence on temporal resolution can be determined. To demonstrate the physical resolution according to the Rayleigh-criterion, measurements were performed on blackened bead pairs. Investigations with partially transparent beads demonstrate the high sensitivity of time-resolving techniques with respect to variations in scattering or absorption coefficients

    Luminescence in sulfides : a rich history and a bright future

    Get PDF
    Sulfide-based luminescent materials have attracted a lot of attention for a wide range of photo-, cathodo- and electroluminescent applications. Upon doping with Ce3+ and Eu2+, the luminescence can be varied over the entire visible region by appropriately choosing the composition of the sulfide host. Main application areas are flat panel displays based on thin film electroluminescence, field emission displays and ZnS-based powder electroluminescence for backlights. For these applications, special attention is given to BaAl2S4:Eu, ZnS:Mn and ZnS:Cu. Recently, sulfide materials have regained interest due to their ability (in contrast to oxide materials) to provide a broad band, Eu2+-based red emission for use as a color conversion material in white-light emitting diodes (LEDs). The potential application of rare-earth doped binary alkaline-earth sulfides, like CaS and SrS, thiogallates, thioaluminates and thiosilicates as conversion phosphors is discussed. Finally, this review concludes with the size-dependent luminescence in intrinsic colloidal quantum dots like PbS and CdS, and with the luminescence in doped nanoparticles
    corecore