Coherent receiver design and analysis for interleaved division multiple access (IDMA)

This thesis discusses a new multiuser detection technique for cellular wireless communications. Multiuser communications is critical in cellular systems as multiple terminals (users) transmit to base stations (or wireless infrastructure). Efficient receiver methods are needed to maximise the performance of these links and maximise overall throughput and coverage while minimising inter-cell interference. Recently a new technique, Interleave-Division Multiple Access (IDMA), was developed as a variant of direct-sequence code division multiple access (DS-CDMA). In this new scheme users are separated by user specific interleavers, and each user is allocated a low rate code. As a result, the bandwidth expansion is devoted to the low rate code and not weaker spreading codes. IDMA has shown to have significant performance gains over traditional DS-CDMA with a modest increase in complexity. The literature on IDMA primarily focuses on the design of low rate forward error correcting (FEC) codes, as well as channel estimation. However, the practical aspects of an IDMA receiver such as timing acquisition, tracking, block asynchronous detection, and cellular analysis are rarely studied. The objective of this thesis is to design and analyse practical synchronisation, detection and power optimisation techniques for IDMA systems. It also, for the first time, provides a novel analysis and design of a multi-cell system employing a general multiuser receiver. These tools can be used to optimise and evaluate the performance of an IDMA communication system. The techniques presented in this work can be easily employed for DS-CDMA or other multiuser receiver designs with slight modification. Acquisition and synchronisation are essential processes that a base-station is required to perform before user's data can be detected and decoded. For high capacity IDMA systems, which can be heavily loaded and operate close to the channel capacity, the performance of acquisition and tracking can be severely affected by multiple access interference as well as severe drift. This thesis develops acquisition and synchronisation algorithms which can cope with heavy multiple access interference as well as high levels of drift. Once the timing points have been estimated for an IDMA receiver the detection and decoding process can proceed. An important issue with uplink systems is the alignment of frame boundaries for efficient detection. This thesis demonstrates how a fully asynchronous system can be modelled for detection. This thesis presents a model for the frame asynchronous IDMA system, and then develops a maximum likelihood receiver for the proposed system. This thesis develops tools to analyse and optimise IDMA receivers. The tools developed are general enough to be applied to other multiuser receiver techniques. The conventional EXIT chart analysis of unequal power allocated multiuser systems use an averaged EXIT chart analysis for all users to reduce the complexity of the task. This thesis presents a multidimensional analysis for power allocated IDMA, and shows how it can be utilised in power optimisation. Finally, this work develops a novel power zoning technique for multicell multiuser receivers using the optimised power levels, and illustrates a particular example where there is a 50% capacity improvement using the proposed scheme. -- provided by Candidate

Adaptive implementation of turbo multi-user detection architecture

MULTI-access techniques have been adopted widely for communications in underwater acoustic channels, which present many challenges to the development of reliable and practical systems. In such an environment, the unpredictable and complex ocean conditions cause the acoustic waves to be affected by many factors such as limited bandwidth, large propagation losses, time variations and long latency, which limit the usefulness of such techniques. Additionally, multiple access interference (MAI) signals and poor estimation of the unknown channel parameters in the presence of limited training sequences are two of the major problems that degrade the performance of such technologies. In this thesis, two different single-element multi-access schemes, interleave division multiple access (IDMA) and code division multiple access (CDMA), employing decision feedback equalization (DFE) and soft Rake-based architectures, are proposed for multi-user underwater communication applications. By using either multiplexing pilots or continuous pilots, these adaptive turbo architectures with carrier phase tracking are jointly optimized based on the minimum mean square error (MMSE) criterion and adapted iteratively by exchanging soft information in terms of Log-Likelihood Ratio (LLR) estimates with the single-user’s channel decoders. The soft-Rake receivers utilize developed channel estimation and the detection is implemented using parallel interference cancellation (PIC) to remove MAI effects between users. These architectures are investigated and applied to simulated data and data obtained from realistic underwater communication trials using off-line processing of signals acquired during sea-trials in the North Sea. The results of different scenarios demonstrate the penalty in performance as the fading induces irreducible error rates that increase with channel delay spread and emphasize the benefits of using coherent direct adaptive receivers in such reverberant channels. The convergence behaviour of the detectors is evaluated using EXIT chart analyses and issues such as the adaptation parameters and their effects on the performance are also investigated. However, in some cases the receivers with partial knowledge of the interleavers’ patterns or codes can still achieve performance comparable to those with full knowledge. Furthermore, the thesis describes implementation issues of these algorithms using digital signal processors (DSPs), such as computational complexity and provides valuable guidelines for the design of real time underwater communication systems.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Adaptive implementation of turbo multi-user detection architecture

MULTI-access techniques have been adopted widely for communications in underwater acoustic channels, which present many challenges to the development of reliable and practical systems. In such an environment, the unpredictable and complex ocean conditions cause the acoustic waves to be affected by many factors such as limited bandwidth, large propagation losses, time variations and long latency, which limit the usefulness of such techniques. Additionally, multiple access interference (MAI) signals and poor estimation of the unknown channel parameters in the presence of limited training sequences are two of the major problems that degrade the performance of such technologies. In this thesis, two different single-element multi-access schemes, interleave division multiple access (IDMA) and code division multiple access (CDMA), employing decision feedback equalization (DFE) and soft Rake-based architectures, are proposed for multi-user underwater communication applications. By using either multiplexing pilots or continuous pilots, these adaptive turbo architectures with carrier phase tracking are jointly optimized based on the minimum mean square error (MMSE) criterion and adapted iteratively by exchanging soft information in terms of Log-Likelihood Ratio (LLR) estimates with the single-user’s channel decoders. The soft-Rake receivers utilize developed channel estimation and the detection is implemented using parallel interference cancellation (PIC) to remove MAI effects between users. These architectures are investigated and applied to simulated data and data obtained from realistic underwater communication trials using off-line processing of signals acquired during sea-trials in the North Sea. The results of different scenarios demonstrate the penalty in performance as the fading induces irreducible error rates that increase with channel delay spread and emphasize the benefits of using coherent direct adaptive receivers in such reverberant channels. The convergence behaviour of the detectors is evaluated using EXIT chart analyses and issues such as the adaptation parameters and their effects on the performance are also investigated. However, in some cases the receivers with partial knowledge of the interleavers’ patterns or codes can still achieve performance comparable to those with full knowledge. Furthermore, the thesis describes implementation issues of these algorithms using digital signal processors (DSPs), such as computational complexity and provides valuable guidelines for the design of real time underwater communication systems.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Iterative Detection for Overloaded Multiuser MIMO OFDM Systems

Inspired by multiuser detection (MUD) and the ‘Turbo principle’, this thesis deals with iterative interference cancellation (IIC) in overloaded multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. Linear detection schemes, such as zero forcing (ZF) and minimum mean square error (MMSE) cannot be used for the overloaded system because of the rank deficiency of channel matrix, while the optimal approach, the maximum likelihood (ML) detection has high computational complexity. In this thesis, an iterative interference cancellation (IIC) multiuser detection scheme with matched filter and convolutional codes is considered. The main idea of this combination is a low complexity receiver. Parallel interference cancellation (PIC) is employed to improve the multiuser receiver performance for overloaded systems. A log-likelihood ratio (LLR) converter is proposed to further improve the reliability of the soft value converted from the output of the matched filter. Simulation results show that the bit error rate (BER) performance of this method is close to the optimal approach for a two user system. However, for the four user or more user system, it has an error floor of the BER performance. For this case, a channel selection scheme is proposed to distinguish whether the channel is good or bad by using the mutual information based on the extrinsic information transfer (EXIT) chart. The mutual information can be predicted in a look-up table which greatly reduces the complexity. For those ‘bad’ channels identified by the channel selection, we introduce two adaptive transmission methods to deal with such channels: one uses a lower code rate, and the other is multiple transmissions. The use of an IIC receiver with the interleave-division multiple access (IDMA) to further improve the BER performance without any channel selection is also investigated. It has been shown that this approach can remove the error floor. Finally, the influence of channel accuracy on the IIC is investigated. Pilot-based Wiener filter channel estimation is used to test and verify how much the IIC is influenced by the channel accuracy

Nonorthogonal Multiple Access for 5G and Beyond

This work was supported in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/N029720/1 and Grant EP/N029720/2. The work of L. Hanzo was supported by the ERC Advanced Fellow Grant Beam-me-up

Optimisation of Iterative Multi-user Receivers using Analytical Tools

The objective of this thesis is to develop tools for the analysis and optimization of an iterative receiver. These tools can be applied to most soft-in soft-out (SISO) receiver components. For illustration purposes we consider a multi-user DS-CDMA system with forward error correction that employs iterative multi-user detection based on soft interference cancellation and single user decoding. Optimized power levels combined with adaptive scheduling allows for efficient utilization of receiver resources for heavily loaded systems.¶ Metric transfer analysis has been shown to be an accurate method of predicting the convergence behavior of iterative receivers. EXtrinsic Information (EXIT), fidelity (FT) and variance (VT) transfer analysis are well-known methods, however the relationship between the different approaches has not been explored in detail. We compare the metrics numerically and analytically and derive functions to closely approximate the relationship between them. The result allows for easy translation between EXIT, FT and VT methods. Furthermore, we extend the $J$ function, which describes mutual information as a function of variance, to fidelity and symbol error variance, the Rayleigh fading channel model and a channel estimate. ...

Performance of turbo multi-user detectors in space-time coded DS-CDMA systems

Includes bibliographical references (leaves 118-123).In this thesis we address the problem of improving the uplink capacity and the performance of a DS-CDMA system by combining MUD and turbo decoding. These two are combined following the turbo principle. Depending on the concatenation scheme used, we divide these receivers into the Partitioned Approach (PA) and the Iterative Approach (IA) receivers. To enable the iterative exchange of information, these receivers employ a Parallel Interference Cancellation (PIC) detector as the first receiver stage

Optical Orthogonal Frequency Division Multiplexed communication systems: analysis, design and optimization

En este trabajo se realiza una intensiva labor teórica de descripción de sistemas de comunicaciones ópticas que utilizan la técnica de multiplexación por división de frecuencias ortogonales (OFDM en inglés), más concretamente en sistemas con modulación directa de la intensidad de un láser y detección directa. Se parte pues de un modelo analítico que estudia con detalle todos aquellos fenómenos que afectan a la señal de información detectada en el receptor. Tales fenómenos son: la nolinealidad del láser, las modulaciones de intensidad y de fase ópticas, la propagación a través de la fibra óptica teniendo en cuenta la dispersión cromática de primer orden, y la detección de intensidad óptica final mediante un detector de ley cuadrática. El modelo analítico es validado mediante comparaciones con resultados obtenidos a través de simulaciones con software comercial. Dada la característica singularidad de las señales OFDM debidas a su naturaleza multi-portadora, la amplitud de la señal generada es aleatoria, y el modelo analítico es complementado con un estudio que contempla el recorte o "clipping" en el transmisor. Además, se tiene en cuenta los efectos de filtrado de la señal a lo largo de sistema de comunicaciones. Con el trabajo analítico realizado se está en disposición de realizar una descripción bastante completa de los principales fenómenos y realizar estudios para evaluar el funcionamiento final ante diferentes valores de los parámetros del sistema. Es bien sabido que los sistemas de comunicaciones ópticas con modulación y detección directa se ven perjudicados por la distorsión no lineal, que para señales multi-portadora como OFDM se traduce en la mezcla de los símbolos de información que transportan las diferentes subportadoras. Para mitigar la distorsión no lineal y así mejorar el funcionamiento del sistema, se propone el uso de una técnica de pre-distorsión que se basa en el modelo analítico previamente propuesto. Esta técnica mejora la eficiencia de modulación, haciendo posible incrementar el término de la señal de información sin que se vea incrementada la distorsión no lineal en el receptor. La técnica aquí propuesta se compara también con otra ya publicada con el objetivo de evaluar su funcionamiento. Otra técnica para la mejora de sistemas con modulación y detección directas es la realizada mediante filtrado óptico. Aunque se conoce de forma más o menos intuitiva su funcionamiento para formatos de modulación ópticos tradicionales, es preciso disponer de una formulación matemática para señales ópticas OFDM para entender de forma exacta su principio de operación, las mejoras obtenidas, así como su potencial. En esta estapa se realiza esta formulación matemática ampliando el análisis teórico previamente propuesto, y se aplica para evaluar el funcionamiento obtenido con diversas estructuras de filtrado óptico. Finalmente, puesto que un potencial escenario de funcionamiento para señales ópticas OFDM son las redes de acceso donde operan más de un usuario, se propone y se estudia la técnica "interleaving division multiple access" (IDMA) en combinación con OFDM.Sánchez Costa, C. (2014). Optical Orthogonal Frequency Division Multiplexed communication systems: analysis, design and optimization [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/39375TESI