5,753 research outputs found
Recommended from our members
Considerations for Future IGS Receivers
Future IGS receivers are considered against the backdrop of GNSS signal modernization
and the IGS’s goal of further improving the accuracy of its products. The purpose of this paper is to
provide IGS members with a guide to making decisions about GNSS receivers. Modernized GNSS signals
are analyzed with a view toward IGS applications. A schedule for minimum IGS receiver requirements
is proposed. Features of idealized conceptual receivers are discussed. The prospects for standard commercial
receivers and for software-defined GNSS receivers are examined. Recommendations are given
for how the IGS should proceed in order to maximally benefit from the transformation in GNSS that
will occur over the next decade.Aerospace Engineering and Engineering Mechanic
Command system study for the operation and control of unmanned scientific satellites. task i- unified tracking/command/telemetry at lunar distances first quarterly progress report, 30 jun. - 30 sep. 1964
Control of unmanned scientific satellites and unified tracking/command/telemetry at lunar distance
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
Recommended from our members
A Dense Reference Network for Mass-Market Centimeter-Accurate Positioning
The quality of atmospheric corrections provided
by a dense reference network for centimeter-accurate carrierphase
differential GNSS (CDGNSS) positioning is investigated.
A dense reference network (less than 20 km inter-station distance)
offers significant benefits for mass-market users, enabling lowcost
(including single-frequency) CDGNSS positioning with rapid
integer ambiguity resolution. Precise positioning on a massmarket
platform would significantly influence the world economy,
ushering in a host of consumer-focused applications such as
globally-registered augmented and virtual reality and improved
all-weather safety and efficiency for intelligent transportation
systems, applications which have so far been hampered by the
several-meter-level errors in standard GNSS positioning. This
contribution examines CDGNSS integer ambiguity resolution
performance in terms of network correction uncertainty, and
network correction uncertainty, in turn, in terms of network
density. It considers the total error in network corrections: a
sum of ionospheric, tropospheric, and reference station multipath
components. The paper’s primary goal is to identify the network
density beyond which mass-market users would see no further
significant improvement in ambiguity resolution performance. It
finishes by describing development and deployment of a low-cost
dense reference network in Austin, Texas.Aerospace Engineering and Engineering Mechanic
Robust Positioning in the Presence of Multipath and NLOS GNSS Signals
GNSS signals can be blocked and reflected by nearby objects, such as buildings, walls, and vehicles. They can also be reflected by the ground and by water. These effects are the dominant source of GNSS positioning errors in dense urban environments, though they can have an impact almost anywhere. Non- line-of-sight (NLOS) reception occurs when the direct path from the transmitter to the receiver is blocked and signals are received only via a reflected path. Multipath interference occurs, as the name suggests, when a signal is received via multiple paths. This can be via the direct path and one or more reflected paths, or it can be via multiple reflected paths. As their error characteristics are different, NLOS and multipath interference typically require different mitigation techniques, though some techniques are applicable to both. Antenna design and advanced receiver signal processing techniques can substantially reduce multipath errors. Unless an antenna array is used, NLOS reception has to be detected using the receiver's ranging and carrier-power-to-noise-density ratio (C/N0) measurements and mitigated within the positioning algorithm. Some NLOS mitigation techniques can also be used to combat severe multipath interference. Multipath interference, but not NLOS reception, can also be mitigated by comparing or combining code and carrier measurements, comparing ranging and C/N0 measurements from signals on different frequencies, and analyzing the time evolution of the ranging and C/N0 measurements
Understanding and ameliorating non-linear phase and amplitude responses in AMCW Lidar
Amplitude modulated continuous wave (AMCW) lidar systems commonly suffer from non-linear phase and amplitude responses due to a number of known factors such as aliasing and multipath inteference. In order to produce useful range and intensity information it is necessary to remove these perturbations from the measurements. We review the known causes of non-linearity, namely aliasing, temporal variation in correlation waveform shape and mixed pixels/multipath inteference. We also introduce other sources of non-linearity, including crosstalk, modulation waveform envelope decay and non-circularly symmetric noise statistics, that have been ignored in the literature. An experimental study is conducted to evaluate techniques for mitigation of non-linearity, and it is found that harmonic cancellation provides a significant improvement in phase and amplitude linearity
Navigation/traffic control satellite mission study. Volume 4 - Critical technology, growth and economic summaries Final report
Navigation and traffic control satellite network developmen
- …