A local defect resonance for linear and nonlinear ultrasonic thermography

An efficient wave-defect interaction is the key to a high thermal response of flaws in ultrasonic thermography. To selectively enhance defect vibrations a concept of local defect resonance is developed and applied to ultrasonic activation of defects. The frequency match between the defect resonance frequency and the probing ultrasonic wave results in a substantial rise of a local defect temperature. The defect resonance is accompanied by depletion of the excitation frequency vibration due to nonlinear frequency conversion to higher harmonics. The local generation of higher frequency components provides a high thermal defect response in such an acoustically nonlinear thermography mode

Concept of a novel fast neutron imaging detector based on THGEM for fan-beam tomography applications

The conceptual design and operational principle of a novel high-efficiency, fast neutron imaging detector based on THGEM, intended for future fan-beam transmission tomography applications, is described. We report on a feasibility study based on theoretical modeling and computer simulations of a possible detector configuration prototype. In particular we discuss results regarding the optimization of detector geometry, estimation of its general performance, and expected imaging quality: it has been estimated that detection efficiency of around 5-8% can be achieved for 2.5MeV neutrons; spatial resolution is around one millimeter with no substantial degradation due to scattering effects. The foreseen applications of the imaging system are neutron tomography in non-destructive testing for the nuclear energy industry, including examination of spent nuclear fuel bundles, detection of explosives or drugs, as well as investigation of thermal hydraulics phenomena (e.g., two-phase flow, heat transfer, phase change, coolant dynamics, and liquid metal flow).Comment: 11 Pages; 6 Figures; Proceeding of the International Workshop on Fast Neutron Detectors and Application FNDA2011, Ein Gedi, Israel, November 2011. Published on the Journal of Instrumentation; 2012 JINST 7 C0205

A comparative study assessing the wear behaviour of different ceramic die materials during superplastic forming

Superplastic forming (SPF) is an advanced manufacturing process where metallic sheets are heated to their superplastic region to be blow formed within a die set. The process allows for the forming of complex parts but it is typically restricted to low volume and high value products. Ceramic dies are a developing technology in the SPF domain as they offer lower production costs and shorter lead times than conventional metallic dies, thus reducing process costs. Ceramic dies, however, are limited for SPF applications due to their brittle nature. This paper presents a method to assess ceramic die wear which is based on a novel test rig developed at the Advanced Forming Research Centre (AFRC) where SPF die-blank interaction was replicated at laboratory scale. Controllable normal load and twist compression tests on different ceramic materials were carried out with a view to understanding their wear mechanisms and to ultimately identify methods to improve their wear resistance

Study of Scattering and Polarization of Light in Biological Tissue

Tkáňová optika nabývá rychle na významu a přesná znalost optických vlastností biologických tkání je podstatná pro výzkum v biomedicíně i pro kontrolu kvality potravin. Jestliže je vzorek tkáně osvětlen, dochází k mnohonásobnému odrazu světla. V případě postmortem neživých tkání (maso) je rozměr buněk větší než vlnová délka použitého světla. Dochází k Mieovu rozptylu prošlého nebo zpět odraženého světla, v důsledku čehož se objevují různé polarizační stavy světla. Polarizační stavy světla rozptýleného na difúzním prostředí jsou experimentálně zkoumány a modelovány. V práci jsme provedli dva modifikované experimenty: rozptyl polarizovaného světla, které dvakrát prochází vzorkem (vpřed a vzad) a jen světla, které jen prochází vzorkem. Měření rozptýleného světla ukazuje, že dochází k depolarizaci a ke stáčení polarizační roviny, což obojí závisí na orientaci svalových vláken a stárnutí tkání postmortem. Mimo experimentů byl také proveden teoretický popis difúzní biologické tkáně a byla vypočtena radiační přenosová rovnice pomocí modifikované Monte Carlo metody, která zahrnuje polarizační stav světla (PLMC). Je ukázáno, že stupeň polarizace podstatně závisí na optických vlastnostech rozptylového prostředí. Výsledky ukazují, že stav polarizace světla na výstupu závisí na stavu polarizace světla před vzorkem a na optických vlastnostech a tloušťce vrstvy prostředí v průběhu jejího stárnutí. Je také provedena korelace změn polarizace na čerstvosti masa, i popis dynamického chování polarizace při stárnutí masa.Tissue optics becomes a rapidly expanding field of great interest and a precise knowledge of optical properties of biological tissues is essential for biomedical investigation and food quality control. If the sample of tissue is illuminated, the multiple scattering occurs. In the case of the postmortem tissue (meat) the cell dimensions are larger than the wavelength. Mie scattering of transmitted or reflected light arises and produces various polarization states. Polarization properties of light scattered from a scattering medium have been studied with experiments and modeling. Two modified experiments were performed: scattering of polarized light passing twice the sample (forward and backward) and only transmitted light. The measurements of scattered light display depolarization and rotation of polarized light, which depend both on orientation of the muscle fibers and ageing process of meat. Theoretical description of turbid biological tissue and computing of radiative transfer equation by modified Polarized Light Monte Carlo (PLMC) method has also been executed. It is shown that the degree of polarization is sensitive to the optical properties of the turbid medium. The results demonstrate that polarized light scattered from a scattering medium is sensitive to the state of input polarization and the optical properties and thickness of the tissue during the ageing. The correlations of polarization changes and freshness of meat, as well as dynamic behavior of the polarization in ageing meat are shown.

Fireground location understanding by semantic linking of visual objects and building information models

This paper presents an outline for improved localization and situational awareness in fire emergency situations based on semantic technology and computer vision techniques. The novelty of our methodology lies in the semantic linking of video object recognition results from visual and thermal cameras with Building Information Models (BIM). The current limitations and possibilities of certain building information streams in the context of fire safety or fire incident management are addressed in this paper. Furthermore, our data management tools match higher-level semantic metadata descriptors of BIM and deep-learning based visual object recognition and classification networks. Based on these matches, estimations can be generated of camera, objects and event positions in the BIM model, transforming it from a static source of information into a rich, dynamic data provider. Previous work has already investigated the possibilities to link BIM and low-cost point sensors for fireground understanding, but these approaches did not take into account the benefits of video analysis and recent developments in semantics and feature learning research. Finally, the strengths of the proposed approach compared to the state-of-the-art is its (semi -)automatic workflow, generic and modular setup and multi-modal strategy, which allows to automatically create situational awareness, to improve localization and to facilitate the overall fire understanding

Study of the properties of hyperpolarized xenon-129 for magnetic resonance imaging

Produkce hyperpolarizovaných plynů, především helia (3He) nebo xenonu (129Xe), nachází stále rostoucí rozsah aplikací v zobrazování magnetickou rezonancí (MRI). Helium ani xenon nejsou obyčejně obsaženy v těle a experimenty tedy nejsou ovlivněny nechtěným signálem z okolních tkání. Ukázalo se, že několika hyperpolarizačními technikami může být magnetická polarizace (magnetizace) jader vzácných plynů zvýšena na hladinu, se kterou jsou praktické aplikace proveditelné. Hyperpolarizované plyny mohou tedy být užitečným nástrojem pro neinvazivní zkoumání lidského dýchání, dovolující statické zobrazování během zadržení dechu nebo zkoumání dynamiky výdechu nebo nádechu, nebo funkčního zobrazování. V neživé přírodě, mohou být hyperpolarizovaný plyny využity jako kontrastní látka při studiu mikroporézních materiálů, jako jsou zeolity, stavební látky a hmoty, atd. V této doktorské práci je popsán vývoj a konstrukce aparatury pro hyperpolarizaci xenonu (izotopu 129Xe). Nákup hyperpolarizovaného xenonu od jiných výzkumných center v zahraničí a jeho dovážení by ovšem nebylo efektivní a to zejména z důvodu náročnosti zajištění potřebných fyzikálních podmínek pro přepravu hyperpolarizovaného plynu. Toto bylo hlavní motivací k vývoji vlastní technologie pro přípravu hyperpolarizovaného xenonu. Se zvládnutou technologií by bylo možné navázat spolupráci s medicínskými zařízeními, nebo s týmy zabývající se živou nebo neživou přírodou (např. při studiu mikroporézních materiálů, gelů, v zemědělských aplikacích nebo při výzkumu využívajících zvířat, atd.). Cílem této práce je studium teorie hyperpolarizovaných vzácných plynů se zaměřením na 129Xe a experimentální ověření a změření relaxačních časů pomocí jaderné magnetické rezonance. Vzhledem k tomu, že je možné hyperpolarizované vzácné plyny skladovat pro pozdější využití, se tato práce také zabývá možnostmi zásobníku hyperpolarizovaného vzácného plynu a jeho teoretickým a experimentálním řešením. V této práci jsou popsány především dva základní typy experimentů přípravy hyperpolarizovaného xenonu. V obou jsou využity zatavené válcové skleněné vzorky naplněné xenonem a doplňujícím plynem – dusíkem, heliem. První z experimentů se zabývá měřením vlastností termálně polarizovaného xenonu a druhý měřením vlastností hyperpolarizovaného xenonu. Pro hyperpolarizaci 129Xe bylo použito výkonového laseru a experimentálně byla zkoumána jednak míra polarizace na základě změny spektrální hustoty čerpacího laserového svazku a dále pak optimální doba optického čerpání 129Xe a relaxační časy xenonu.The production of hyperpolarized gases (HpG), predominantly helium (3He) or xenon (129Xe), have found a steadily increasing range of applications in magnetic resonance imaging (MRI). Neither helium nor xenon are normally present in the body, thus the magnetic resonance experiments do not suffer from unwanted background signals. It has been demonstrated by several techniques of hyperpolarization that the magnetic polarization (magnetization) of the noble gas nuclei can be increased to levels that make practical application feasible. Hence, hyperpolarized gases may become a useful tool for non-invasive investigation of human lung ventilation, permitting static imaging during breathhold or probing the dynamics of inhalation/exhalation, or functional imaging. In inanimate nature, hyperpolarized gas can be used as a contrast medium for microporous materials, such zeolites, constructive materials in civil engineering, etc. This thesis describes the development and construction of a xenon (129Xe) hyperpolarization (Hp) device. Buying hyperpolarized xenon from other research centres abroad is inefficient mainly because of a need of a fast transport of HpXe under specific conditions. That was the main motivation for developing of our own technology for production of HpXe. Well-handled technology could allow a medical cooperation or cooperation with teams dealing with in/animate nature (microporous material, gels, agriculture, animals, etc.). The aim of this work is to study the hyperpolarized noble gases theory with concern to 129Xe and to experimentally prove and measure xenon relaxation times by the NMR. Since it is possible to store hyperpolarized noble gases for later use, this doctoral thesis also explores the potentials of hyperpolarized noble gas storage system and its theoretical and experimental solution. Mainly two types of experiments are described in the thesis. In both experiments, sealed cylindrical Simax sample filled with xenon and supplement gas – nitrogen, helium were used. The first type of experiment is based on thermally polarized xenon and the second on hyperpolarized xenon. For hyperpolarization of 129Xe a high-power laser was used. In this experiment, the relation between power spectral density of optical pumping beam and efficiency of HpXe production process was investigated. The optimal duration of optical pumping and relaxation times of HpXe were investigated too.

A Model that Predicts the Material Recognition Performance of Thermal Tactile Sensing

Tactile sensing can enable a robot to infer properties of its surroundings, such as the material of an object. Heat transfer based sensing can be used for material recognition due to differences in the thermal properties of materials. While data-driven methods have shown promise for this recognition problem, many factors can influence performance, including sensor noise, the initial temperatures of the sensor and the object, the thermal effusivities of the materials, and the duration of contact. We present a physics-based mathematical model that predicts material recognition performance given these factors. Our model uses semi-infinite solids and a statistical method to calculate an F1 score for the binary material recognition. We evaluated our method using simulated contact with 69 materials and data collected by a real robot with 12 materials. Our model predicted the material recognition performance of support vector machine (SVM) with 96% accuracy for the simulated data, with 92% accuracy for real-world data with constant initial sensor temperatures, and with 91% accuracy for real-world data with varied initial sensor temperatures. Using our model, we also provide insight into the roles of various factors on recognition performance, such as the temperature difference between the sensor and the object. Overall, our results suggest that our model could be used to help design better thermal sensors for robots and enable robots to use them more effectively.Comment: This article is currently under review for possible publicatio

Emerging technologies for the non-invasive characterization of physical-mechanical properties of tablets

The density, porosity, breaking force, viscoelastic properties, and the presence or absence of any structural defects or irregularities are important physical-mechanical quality attributes of popular solid dosage forms like tablets. The irregularities associated with these attributes may influence the drug product functionality. Thus, an accurate and efficient characterization of these properties is critical for successful development and manufacturing of a robust tablets. These properties are mainly analyzed and monitored with traditional pharmacopeial and non-pharmacopeial methods. Such methods are associated with several challenges such as lack of spatial resolution, efficiency, or sample-sparing attributes. Recent advances in technology, design, instrumentation, and software have led to the emergence of newer techniques for non-invasive characterization of physical-mechanical properties of tablets. These techniques include near infrared spectroscopy, Raman spectroscopy, X-ray microtomography, nuclear magnetic resonance (NMR) imaging, terahertz pulsed imaging, laser-induced breakdown spectroscopy, and various acoustic- and thermal-based techniques. Such state-of-the-art techniques are currently applied at various stages of development and manufacturing of tablets at industrial scale. Each technique has specific advantages or challenges with respect to operational efficiency and cost, compared to traditional analytical methods. Currently, most of these techniques are used as secondary analytical tools to support the traditional methods in characterizing or monitoring tablet quality attributes. Therefore, further development in the instrumentation and software, and studies on the applications are necessary for their adoption in routine analysis and monitoring of tablet physical-mechanical properties