Adaptive buffer power save mechanism for mobile multimedia streaming

With the proliferation of wireless networks, the use of mobile devices to stream multimedia is growing in popularity. Although the devices are improving in that they are becoming smaller, more complex and capable of running more applications than ever before, there is one aspect of them that is lagging behind. Batteries have seen little development, even though they are one of the most important parts of the devices. Multimedia streaming puts extra pressure on batteries, causing them to discharge faster. This often means that streaming tasks can not be completed, resulting in significant user dissatisfaction. Consequently, effort is required to devise mechanisms to enable and increase in battery life while streaming multimedia. In this context, this thesis presents a novel algorithm to save power in mobile devices during the streaming of multimedia content. The proposed Adaptive-Buffer Power Save Mechanism (AB-PSM) controls how the data is sent over wireless networks, achieving significant power savings. There is little or no effect on the user and the algorithm is very simple to implement. The thesis describes tests which show the effectiveness of AB-PSM in comparison with the legacy power save mechanism present in IEEE 802.11. The thesis also presents a detailed overview of the IEEE 802.11 protocols and an in-depth literature review in the area of power saving during multimedia streaming. A novel analysis of how the battery of a mobile device is affected by multimedia streaming in its different stages is given. A total-power-save algorithm is then described as a possible extension to the Adaptive-Buffer Power Save Mechanism

A Comprehensive Approach to WSN-Based ITS Applications: A Survey

In order to perform sensing tasks, most current Intelligent Transportation Systems (ITS) rely on expensive sensors, which offer only limited functionality. A more recent trend consists of using Wireless Sensor Networks (WSN) for such purpose, which reduces the required investment and enables the development of new collaborative and intelligent applications that further contribute to improve both driving safety and traffic efficiency. This paper surveys the application of WSNs to such ITS scenarios, tackling the main issues that may arise when developing these systems. The paper is divided into sections which address different matters including vehicle detection and classification as well as the selection of appropriate communication protocols, network architecture, topology and some important design parameters. In addition, in line with the multiplicity of different technologies that take part in ITS, it does not consider WSNs just as stand-alone systems, but also as key components of heterogeneous systems cooperating along with other technologies employed in vehicular scenarios

Contributions to QoS and energy efficiency in wi-fi networks

The Wi-Fi technology has been in the recent years fostering the proliferation of attractive mobile computing devices with broadband capabilities. Current Wi-Fi radios though severely impact the battery duration of these devices thus limiting their potential applications. In this thesis we present a set of contributions that address the challenge of increasing energy efficiency in Wi-Fi networks. In particular, we consider the problem of how to optimize the trade-off between performance and energy effciency in a wide variety of use cases and applications. In this context, we introduce novel energy effcient algorithms for real-time and data applications, for distributed and centralized Wi-Fi QoS and power saving protocols and for Wi-Fi stations and Access Points. In addition, the di¿erent algorithms presented in this thesis adhere to the following design guidelines: i) they are implemented entirely at layer two, and can hence be easily re-used in any device with a Wi-Fi interface, ii) they do not require modi¿cations to current 802.11 standards, and can hence be readily deployed in existing Wi-Fi devices, and iii) whenever possible they favor client side solutions, and hence mobile computing devices implementing them can benefit from an increased energy efficiency regardless of the Access Point they connect to. Each of our proposed algorithms is thoroughly evaluated by means of both theoretical analysis and packet level simulations. Thus, the contributions presented in this thesis provide a realistic set of tools to improve energy efficiency in current Wi-Fi networks

Energy-aware adaptive solutions for multimedia delivery to wireless devices

The functionality of smart mobile devices is improving rapidly but these devices are limited in terms of practical use because of battery-life. This situation cannot be remedied by simply installing batteries with higher capacities in the devices. There are strict limitations in the design of a smartphone, in terms of physical space, that prohibit this “quick-fix” from being possible. The solution instead lies with the creation of an intelligent, dynamic mechanism for utilizing the hardware components on a device in an energy-efficient manner, while also maintaining the Quality of Service (QoS) requirements of the applications running on the device. This thesis proposes the following Energy-aware Adaptive Solutions (EASE): 1. BaSe-AMy: the Battery and Stream-aware Adaptive Multimedia Delivery (BaSe-AMy) algorithm assesses battery-life, network characteristics, video-stream properties and device hardware information, in order to dynamically reduce the power consumption of the device while streaming video. The algorithm computes the most efficient strategy for altering the characteristics of the stream, the playback of the video, and the hardware utilization of the device, dynamically, while meeting application’s QoS requirements. 2. PowerHop: an algorithm which assesses network conditions, device power consumption, neighboring node devices and QoS requirements to decide whether to adapt the transmission power or the number of hops that a device uses for communication. PowerHop’s ability to dynamically reduce the transmission power of the device’s Wireless Network Interface Card (WNIC) provides scope for reducing the power consumption of the device. In this case shorter transmission distances with multiple hops can be utilized to maintain network range. 3. A comprehensive survey of adaptive energy optimizations in multimedia-centric wireless devices is also provided. Additional contributions: 1. A custom video comparison tool was developed to facilitate objective assessment of streamed videos. 2. A new solution for high-accuracy mobile power logging was designed and implemented

The Effective Transmission and Processing of Mobile Multimedia

Ph.DDOCTOR OF PHILOSOPH

Heterogeneous Wireless Networks QoE Framework

With the appearance of small cells and the move of mobile networks towards an all-IP 4G network, the convergence of these with Wi-Fi becomes a possibility which at the same time opens the path to achieve what will become 5G connectivity. This thesis describes the evolution of the different mainstream wireless technologies deployed around the world and how they can interact, and provides tools to use this convergence to achieve the foreseen requirements expected in a 5G environment and the ideal user experience. Several topics were identified as needing attention: handover between heterogeneous networks, security of large numbers of small cells connected via a variety of backhaul technologies to the core networks, edge content distribution to improve latency, improvement of the service provided in challenging radio environments and interference between licensed and unlicensed spectrum. Within these topics a contribution was made to improve the current status by analysing the unaddressed issues and coming up with potential improvements that were tested in trials or lab environment. The main contributions from the study have been: 1. A patent in the wireless security domain that reuses the fact that overlapping coverage is and will be available and protects against man in the middle attacks (Section 5.3). 2. A patent in the content distribution domain that manages to reduce the cost to deliver content within a mobile network by looking for the shortest path to the requested content (Section 6.3). 3. Improvements and interoperability test of 802.21 standard which improves the seamlessness of handovers (Section 4.2). 4. 2 infill trials which focus on how to improve the user experience in those challenging conditions (Sections 7.2 and 7.3). 5. An interference study with Wi-Fi 2.4GHz for the newly allocated spectrum for 4G (Section 8.2). This thesis demonstrates some of the improvements required in current wireless networks to evolve towards 5G and achieve the coverage, service, user experience, latency and security requirements expected from the next generation mobile technology

Quality of Service for Multimedia and Control System Applications in Mobile Ad-hoc Network

A Mobile Ad-Hoc Network (MANET) is a collection of randomly distributed infrastructure-less mobile nodes that form a wireless network. These Mobile nodes have the capability to act as a host or relay. As a host, the mobile nodes can be the source and/or destination of traffic, and when acting as a relay, they can be an intermediate node that forwards the traffic to its destination. Some of the challenges of a MANET include the dynamic network topology, device discovery, power constraints, wireless channel conditions and limited network resources. These challenges degrade the network performance and thus affect the network stability and robustness. Therefore, it is difficult for a MANET to attain the Quality of Service (QoS) of a wired network. This thesis aims to address the problem of the limited wireless network resources by proposing two adaptive scheduling algorithms that can adapt in real-time to the changes in the network. To achieve the aim; this thesis first analyses the behaviour of various application profiles in a queue. It models Voice, Email, and Internet Browsing traffic (by specifying packet sizes, and inter-arrival rates based on various distributions) separately and then simultaneously in a common network for uncongested and congested conditions, after which scheduling is applied in order to improve the overall network performance. The Voice traffic profile is then added to the UDP/IP protocol stack and the network performance is compared to a simple node without the UDP/IP protocol stack. A realistic wireless propagation model for the simulation is developed from a point-to-point open-field outdoor experiment. This thesis proposes two adaptive priority fuzzy based scheduler for a MANET, the priority of packets in the queue are determined based on the real-time available network resources. The methodology for transmitting a live-feed video stream over OPNET to validate the scheduler is also presented. An interface between the simulation and hardware is created to send real-time video traffic through the simulation network. This thesis concludes by showing that the performance of a MANET network can be improved by applying an adaptive scheduler

An efficient multichannel wireless sensor networks MAC protocol based on IEEE 802.11 distributed co-ordinated function.

This research aimed to create new knowledge and pioneer a path in the area relating to future trends in the WSN, by resolving some of the issues at the MAC layer in Wireless Sensor Networks. This work introduced a Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks. This work commenced by surveying different protocols: contention-based MAC protocols, transport layer protocols, cross-layered design and multichannel multi-radio assignments. A number of existing protocols were analysed, each attempting to resolve one or more problems faced by the current layers. The 802.15.4 performed very poorly at high data rate and at long range. Therefore 802.15.4 is not suitable for sensor multimedia or surveillance system with streaming data for future multichannel multi-radio systems. A survey on 802.11 DCF - which was designed mainly for wireless networks –supports and confirm that it has a power saving mechanism which is used to synchronise nodes. However it uses a random back-off mechanism that cannot provide deterministic upper bounds on channel access delay and as such cannot support real-time traffic. The weaknesses identified by surveying this protocol form the backbone of this thesis The overall aim for this thesis was to introduce multichannel with single radio as a new paradigm for IEEE 802.11 Distributed Coordinated Function (DCF) in wireless sensor networks (WSNs) that is used in a wide range of applications, from military application, environmental monitoring, medical care, smart buildings and other industry and to extend WSNs with multimedia capability which sense for instance sounds or motion, video sensor which capture video events of interest. Traditionally WSNs do not need high data rate and throughput, since events are normally captured periodically. With the paradigm shift in technology, multimedia streaming has become more demanding than data sensing applications as such the need for high data rate protocol for WSN which is an emerging technology in this area. The IEEE 802.11 can support data rates up to 54Mbps and 802.11 DCF was designed specifically for use in wireless networks. This thesis focused on designing an algorithm that applied multichannel to IEEE 802.11 DCF back-off algorithm to reduce the waiting time of a node and increase throughput when attempting to access the medium. Data collection in WSN tends to suffer from heavy congestion especially nodes nearer to the sink node. Therefore, this thesis proposes a contention based MAC protocol to address this problem from the inspiration of the 802.11 DCF backoff algorithm resulting from a comparison of IEEE 802.11 and IEEE 802.15.4 for Future Green Multichannel Multi-radio Wireless Sensor Networks