Optimal Data Scheduling and Admission Control for Backscatter Sensor Networks

© 2017 IEEE. This paper studies the data scheduling and admission control problem for a backscatter sensor network (BSN). In the network, instead of initiating their own transmissions, the sensors can send their data to the gateway just by switching their antenna impedance and reflecting the received RF signals. As such, we can reduce remarkably the complexity, the power consumption, and the implementation cost of sensor nodes. Different sensors may have different functions, and data collected from each sensor may also have a different status, e.g., urgent or normal, and thus we need to take these factors into account. Therefore, in this paper, we first introduce a system model together with a mechanism in order to address the data collection and scheduling problem in the BSN. We then propose an optimization solution using the Markov decision process framework and a reinforcement learning algorithm based on the linear function approximation method, with the aim of finding the optimal data collection policy for the gateway. Through simulation results, we not only show the efficiency of the proposed solution compared with other baseline policies, but also present the analysis for data admission control policy under different classes of sensors as well as different types of data

Embedded Dual Band Rfid Based Blood Glucose Monitoring System For Internet Of Medical Things

Manually recorded health information could lead to errors such as inaccurate patient identification and mismatch patient data that could seriously affect patient safety. In order to reduce the risks of error for patients with diabetes, a new design of wireless blood glucose monitoring system with the embedment of dual band RFID for Internet of Medical Things is being developed. Using this method, passive RFID allows short-range communication to read automatically the patient identification number and active RFID extends long-range communication for recording and monitoring blood glucose data through multi-hop WSN. The work presented in this thesis contributes mainly to the embedded system and its application in healthcare to reduce the burden of recording, tracing and monitoring the patient‘s data by embedding blood glucose sensor, passive RFID, active RFID, WSN, M2M and IoMT into a single platform. A new design concept is established for the patient identification mechanism, where the mechanism is embedded in the source device to enhance the ability of the system to automatically assign the identification number to each blood glucose measurement (mmol/L) during multiple patients monitoring. Additionally, the results from the experiments conducted showed that the developed system produced better overall performance compared to the Bluetooth BGM and conventional BGM system in terms of the shortest recording time and the ability to retransmit data. In the reliability analysis using ANOVA and DOE statistical methods, the result validates that the number of hop and number of end node significantly affects the PDR performance of conventional CSMA/CA. These two parameters are then taken into account in experimental setup for performance evaluation of the enhanced CSMA/CA (EN-CSMA/CA) algorithm that uses an external interrupt mechanism and a cross layer approach. The PDR increased from 94% (conventional CSMA/CA) to 99.33% (EN-CSMA/CA), an improvement of 5.33%. The PDR model estimates that for the best and worst scenario, the percentage of PDR is 100.0% and 51.67%, respectively. To optimize the arrangement of routers for real implementation of the developed system in health facilities, the developed path loss model estimates that the router should be positioned at a distance of 30 m from each other, which agrees with the test results which indicate that the router should be positioned ≤ 40 m in order to achieve the best PDR performance

A low cost solution to authentication in passive RFID systems

Auto-ID Lab University of Adelaide (c) 2006 Copyright. The document attached has been archived with permission.This paper aims to propose a solution to address the issue of authentication to prevent counterfeiting in a low cost RFID based system based on using Physically Uncloneable Functions.Damith C. Ranasinghe, Daihyun Lim, Peter H. Cole and Srinivas Devada

Building efficient wireless infrastructures for pervasive computing environments

Pervasive computing is an emerging concept that thoroughly brings computing devices and the consequent technology into people\u27s daily life and activities. Most of these computing devices are very small, sometimes even invisible , and often embedded into the objects surrounding people. In addition, these devices usually are not isolated, but networked with each other through wireless channels so that people can easily control and access them. In the architecture of pervasive computing systems, these small and networked computing devices form a wireless infrastructure layer to support various functionalities in the upper application layer.;In practical applications, the wireless infrastructure often plays a role of data provider in a query/reply model, i.e., applications issue a query requesting certain data and the underlying wireless infrastructure is responsible for replying to the query. This dissertation has focused on the most critical issue of efficiency in designing such a wireless infrastructure. In particular, our problem resides in two domains depending on different definitions of efficiency. The first definition is time efficiency, i.e., how quickly a query can be replied. Many applications, especially real-time applications, require prompt response to a query as the consequent operations may be affected by the prior delay. The second definition is energy efficiency which is extremely important for the pervasive computing devices powered by batteries. Above all, our design goal is to reply to a query from applications quickly and with low energy cost.;This dissertation has investigated two representative wireless infrastructures, sensor networks and RFID systems, both of which can serve applications with useful information about the environments. We have comprehensively explored various important and representative problems from both algorithmic and experimental perspectives including efficient network architecture design and efficient protocols for basic queries and complicated data mining queries. The major design challenges of achieving efficiency are the massive amount of data involved in a query and the extremely limited resources and capability each small device possesses. We have proposed novel and efficient solutions with intensive evaluation. Compared to the prior work, this dissertation has identified a few important new problems and the proposed solutions significantly improve the performance in terms of time efficiency and energy efficiency. Our work also provides referrable insights and appropriate methodology to other similar problems in the research community

Challenges and opportunities of introducing Internet of Things and Artificial Intelligence applications into Supply Chain Management

The study examines the challenges and opportunities of introducing Artificial Intelligence (AI) and the Internet of Things (IoT) into the Supply Chain Management (SCM). This research focuses on the Logistic Management. The central research question is “What are the key challenges and opportunities of introducing AI and IoT applications into the Supply Chain Management?” The goal of this research is to collect the most appropriate literature to help create a conceptual framework, which involves the integration of the IoT and AI applications into contemporary supply chain management with the emphasis on the logistics management. Additionally, the role of 5G Network is closely studied in order to indicate its capabilities and the processing capacity that it can provide to the AI and IoT operations. In addition, the semi-structured online interview with the top managers from several companies was conducted in order to identify the degree of readiness of the companies for the AI and IoT applications in SCM. From the retrieved results, the major challenges of integrating the IoT into SCM are the security and privacy issues, the sensitivity of the data and high costs of the implementation at an initial stage. Moreover, the research results have shown that the IoT applications can positively affect the SCM activities, in particular, the high visibility across the SC, an effective traceability and an automated data collection. Furthermore, the predictive analysis of AI programs can help the SCM to eliminate the potential errors and failures in the processes.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Dense and long-term monitoring of Earth surface processes with passive RFID -- a review

Billions of Radio-Frequency Identification (RFID) passive tags are produced yearly to identify goods remotely. New research and business applications are continuously arising, including recently localization and sensing to monitor earth surface processes. Indeed, passive tags can cost 10 to 100 times less than wireless sensors networks and require little maintenance, facilitating years-long monitoring with ten's to thousands of tags. This study reviews the existing and potential applications of RFID in geosciences. The most mature application today is the study of coarse sediment transport in rivers or coastal environments, using tags placed into pebbles. More recently, tag localization was used to monitor landslide displacement, with a centimetric accuracy. Sensing tags were used to detect a displacement threshold on unstable rocks, to monitor the soil moisture or temperature, and to monitor the snowpack temperature and snow water equivalent. RFID sensors, available today, could monitor other parameters, such as the vibration of structures, the tilt of unstable boulders, the strain of a material, or the salinity of water. Key challenges for using RFID monitoring more broadly in geosciences include the use of ground and aerial vehicles to collect data or localize tags, the increase in reading range and duration, the ability to use tags placed under ground, snow, water or vegetation, and the optimization of economical and environmental cost. As a pattern, passive RFID could fill a gap between wireless sensor networks and manual measurements, to collect data efficiently over large areas, during several years, at high spatial density and moderate cost.Comment: Invited paper for Earth Science Reviews. 50 pages without references. 31 figures. 8 table

Localisation en intérieur et gestion de la mobilité dans les réseaux sans fils hétérogènes émergents

Au cours des dernières décennies, nous avons été témoins d'une évolution considérable dans l'informatique mobile, réseau sans fil et des appareils portatifs. Dans les réseaux de communication à venir, les utilisateurs devraient être encore plus mobiles exigeant une connectivité omniprésente à différentes applications qui seront de préférence au courant de leur contexte. Certes, les informations de localisation dans le cadre de leur contexte est d'une importance primordiale à la fois la demande et les perspectives du réseau. Depuis l'application ou de point de vue utilisateur, la fourniture de services peut mettre à jour si l'adaptation au contexte de l'utilisateur est activée. Du point de vue du réseau, des fonctionnalités telles que le routage, la gestion de transfert, l'allocation des ressources et d'autres peuvent également bénéficier si l'emplacement de l'utilisateur peuvent être suivis ou même prédit. Dans ce contexte, nous nous concentrons notre attention sur la localisation à l'intérieur et de la prévision transfert qui sont des composants indispensables à la réussite ultime de l'ère de la communication omniprésente envisagé. Alors que les systèmes de positionnement en plein air ont déjà prouvé leur potentiel dans un large éventail d'applications commerciales, le chemin vers un système de localisation à l'intérieur de succès est reconnu pour être beaucoup plus difficile, principalement en raison des caractéristiques difficiles à l'intérieur et l'exigence d'une plus grande précision. De même, la gestion de transfert dans le futur des réseaux hétérogènes sans fil est beaucoup plus difficile que dans les réseaux traditionnels homogènes. Régimes de procédure de transfert doit être sans faille pour la réunion strictes de qualité de service (QoS) des applications futures et fonctionnel malgré la diversité des caractéristiques de fonctionnement des différentes technologies. En outre, les décisions transfert devraient être suffisamment souples pour tenir compte des préférences utilisateur d'un large éventail de critères proposés par toutes les technologies. L'objectif principal de cette thèse est de mettre au point précis, l'heure et l'emplacement de puissance et de systèmes efficaces de gestion de transfert afin de mieux satisfaire applications sensibles au contexte et mobiles. Pour obtenir une localisation à l'intérieur, le potentiel de réseau local sans fil (WLAN) et Radio Frequency Identification (RFID) que l'emplacement autonome technologies de détection sont d'abord étudiés par des essais plusieurs algorithmes et paramètres dans un banc d'essai expérimental réel ou par de nombreuses simulations, alors que leurs lacunes sont également été identifiés. Leur intégration dans une architecture commune est alors proposée afin de combiner leurs principaux avantages et surmonter leurs limitations. La supériorité des performances du système de synergie sur le stand alone homologues est validée par une analyse approfondie. En ce qui concerne la tâche de gestion transfert, nous repérer que la sensibilité au contexte peut aussi améliorer la fonctionnalité du réseau. En conséquence, deux de tels systèmes qui utilisent l'information obtenue à partir des systèmes de localisation sont proposées. Le premier schéma repose sur un déploiement tag RFID, comme notre architecture de positionnement RFID, et en suivant la scène WLAN analyse du concept de positionnement, prédit l'emplacement réseau de la prochaine couche, c'est à dire le prochain point de fixation sur le réseau. Le second régime repose sur une approche intégrée RFID et sans fil de capteur / actionneur Network (WSAN) de déploiement pour la localisation des utilisateurs physiques et par la suite pour prédire la prochaine leur point de transfert à deux couches de liaison et le réseau. Etre indépendant de la technologie d'accès sans fil principe sous-jacent, les deux régimes peuvent être facilement mises en œuvre dans des réseaux hétérogènes [...]Over the last few decades, we have been witnessing a tremendous evolution in mobile computing, wireless networking and hand-held devices. In the future communication networks, users are anticipated to become even more mobile demanding for ubiquitous connectivity to different applications which will be preferably aware of their context. Admittedly, location information as part of their context is of paramount importance from both application and network perspectives. From application or user point of view, service provision can upgrade if adaptation to the user's context is enabled. From network point of view, functionalities such as routing, handoff management, resource allocation and others can also benefit if user's location can be tracked or even predicted. Within this context, we focus our attention on indoor localization and handoff prediction which are indispensable components towards the ultimate success of the envisioned pervasive communication era. While outdoor positioning systems have already proven their potential in a wide range of commercial applications, the path towards a successful indoor location system is recognized to be much more difficult, mainly due to the harsh indoor characteristics and requirement for higher accuracy. Similarly, handoff management in the future heterogeneous wireless networks is much more challenging than in traditional homogeneous networks. Handoff schemes must be seamless for meeting strict Quality of Service (QoS) requirements of the future applications and functional despite the diversity of operation features of the different technologies. In addition, handoff decisions should be flexible enough to accommodate user preferences from a wide range of criteria offered by all technologies. The main objective of this thesis is to devise accurate, time and power efficient location and handoff management systems in order to satisfy better context-aware and mobile applications. For indoor localization, the potential of Wireless Local Area Network (WLAN) and Radio Frequency Identification (RFID) technologies as standalone location sensing technologies are first studied by testing several algorithms and metrics in a real experimental testbed or by extensive simulations, while their shortcomings are also identified. Their integration in a common architecture is then proposed in order to combine their key benefits and overcome their limitations. The performance superiority of the synergetic system over the stand alone counterparts is validated via extensive analysis. Regarding the handoff management task, we pinpoint that context awareness can also enhance the network functionality. Consequently, two such schemes which utilize information obtained from localization systems are proposed. The first scheme relies on a RFID tag deployment, alike our RFID positioning architecture, and by following the WLAN scene analysis positioning concept, predicts the next network layer location, i.e. the next point of attachment to the network. The second scheme relies on an integrated RFID and Wireless Sensor/Actuator Network (WSAN) deployment for tracking the users' physical location and subsequently for predicting next their handoff point at both link and network layers. Being independent of the underlying principle wireless access technology, both schemes can be easily implemented in heterogeneous networks. Performance evaluation results demonstrate the advantages of the proposed schemes over the standard protocols regarding prediction accuracy, time latency and energy savingsEVRY-INT (912282302) / SudocSudocFranceF

Sensor data-based decision making

Increasing globalization and growing industrial system complexity has amplified the interest in the use of information provided by sensors as a means of improving overall manufacturing system performance and maintainability. However, utilization of sensors can only be effective if the real-time data can be integrated into the necessary business processes, such as production planning, scheduling and execution systems. This integration requires the development of intelligent decision making models that can effectively process the sensor data into information and suggest appropriate actions. To be able to improve the performance of a system, the health of the system also needs to be maintained. In many cases a single sensor type cannot provide sufficient information for complex decision making including diagnostics and prognostics of a system. Therefore, a combination of sensors should be used in an integrated manner in order to achieve desired performance levels. Sensor generated data need to be processed into information through the use of appropriate decision making models in order to improve overall performance. In this dissertation, which is presented as a collection of five journal papers, several reactive and proactive decision making models that utilize data from single and multi-sensor environments are developed. The first paper presents a testbed architecture for Auto-ID systems. An adaptive inventory management model which utilizes real-time RFID data is developed in the second paper. In the third paper, a complete hardware and inventory management solution, which involves the integration of RFID sensors into an extremely low temperature industrial freezer, is presented. The last two papers in the dissertation deal with diagnostic and prognostic decision making models in order to assure the healthy operation of a manufacturing system and its components. In the fourth paper a Mahalanobis-Taguchi System (MTS) based prognostics tool is developed and it is used to estimate the remaining useful life of rolling element bearings using data acquired from vibration sensors. In the final paper, an MTS based prognostics tool is developed for a centrifugal water pump, which fuses information from multiple types of sensors in order to take diagnostic and prognostics decisions for the pump and its components --Abstract, page iv