Robust control of systems with output hysteresis and input saturation using a finite time stability approach

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper presents a robust control approach for a class of nonlinear dynamic systems consisting of a linear plant connected in series with a hysteresis operator, and affected by control input saturation. Such a class of systems commonly appears in applications concerning smart materials, in particular thermal shape memory alloys wire actuators. The goal of this paper is to design a robust controller, in the form of an output PI law, which ensures set-point regulation with a desired decay rate and, at the same time, accounts for the effects of both hysteresis and input saturation. The resulting controller appears as attractive on the implementation stand-point, since no accurate hysteresis compensator is required. In order to deal with the proposed problem, the hysteretic plant is first reformulated as a linear parameter-varying system. Subsequently, a finite time stability approach is used to impose constraints on the control input. A new set of bilinear matrix inequalities is developed, in order to perform the design with reduced conservatism by properly exploiting some structural properties of the model. The effectiveness of the method is finally validated by means of a numerical case of study. © 2018 IEEE.Peer ReviewedPostprint (author's final draft

Sinteza H-beskonačno regulatora s unaprijednom granom za kompenzaciju histereze kod piezoelektričnih aktuatora

Piezoelectric actuators, widely used in different micro/nanopositioning applications, generally exhibit nonlinear hysteresis characteristics. The compensation of hysteretic behavior of piezoelectric actuators is mandatory for precise micro/nanopositioning. In this paper, nonlinear hysteresis effect is first characterized using the Prandtl-Ishlinskii hysteresis model. The inverse of the Prandtl-Ishlinskii hysteresis model is employed as a feed-forward controller to compensate for hysteresis nonlinearities of the piezoelectric actuator. Slight hysteresis nonlinearity is still observed in the experimental results due to small mismatch between the identified hysteresis model and the measured hysteresis loop. To further enhance the performance of the piezoelectric actuator in terms of mitigation of hysteresis nonlinearity and precise reference tracking, advanced robust full-order as well as fixed-order H-infinity feedback controllers are designed and applied to this actuator in the presence of feed-forward compensator. The experimental results verify the effectiveness of the proposed control scheme in achieving the improved tracking performance with peak-to-peak tracking error of less than 1% for the desired displacement of 12 um with tracking frequency of 10 Hz.Piezoelektrični aktuatori, rasprostranjeni u različitim primjenama mikro/nanopozicioniranja, općenito su izloženi nelinearnim histereznim karakteristikama. Kompenzacija histereznog ponašanja piezoelektričnih aktuatora nužna je za precizno mikro/nanopozicioniranje. Inverzni Prandtl-Ishlinskii histerezni model korišten je za unaprijednu kompenzaciju histereznih nelinearnosti piezoelektričnog aktuatora. Neznatna histerezna nelinearnost još uvijek je vidljiva u eksperimentalnim rezultatima zbog malog neslaganja između identificiranog histereznog modela i mjerene histerezne petlje. Za daljnje poboljšanje performansi piezoelektričnog aktuatora u smislu smanjenja histerezne nelinearnosti i preciznog slijeđenja reference, napredni robusni H-beskonačno regulatori punog i određenog reda sintetizirani su i primijenjeni na ovaj aktuator uz prisutnost unaprijednog kompenzatora. Eksperimentalni rezultati potvrđuju efektivnost predložene upravljačke strukture u postizanju poboljšanih performansi slijeđenja, uz vršnu vrijednost pogreške manju od 1% za ciljani pomak od 12 um s frekvencijom slijeđenja od 10 Hz

The design, hysteresis modeling and control of a novel SMA-fishing-line actuator

Fishing line can be combined with shape memory alloy (SMA) to form novel artificial muscle actuators which have low cost, are lightweight and soft. They can be applied in bionic, wearable and rehabilitation robots, and can reduce system weight and cost, increase power-to-weight ratio and offer safer physical human-robot interaction. However, these actuators possess several disadvantages, for example fishing line based actuators possess low strength and are complex to drive, and SMA possesses a low percentage contraction and has high hysteresis. This paper presents a novel artificial actuator (known as an SMA-fishing-line) made of fishing line and SMA twisted then coiled together, which can be driven directly by an electrical voltage. Its output force can reach 2.65N at 7.4V drive voltage, and the percentage contraction at 4V driven voltage with a 3N load is 7.53%. An antagonistic bionic joint driven by the novel SMA-fishing-line actuators is presented, and based on an extended unparallel Prandtl-Ishlinskii (EUPI) model, its hysteresis behavior is established, and the error ratio of the EUPI model is determined to be 6.3%. A Joule heat model of the SMA-fishing-line is also presented, and the maximum error of the established model is 0.510mm. Based on this accurate hysteresis model, a composite PID controller consisting of PID and an integral inverse (I-I) compensator is proposed and its performance is compared with a traditional PID controller through simulations and experimentation. These results show that the composite PID controller possesses higher control precision than basic PID, and is feasible for implementation in an SMA-fishing-line driven antagonistic bionic joint

MODELING AND CONTROL OF MAGNETOSTRICTIVE ACTUATORS

Most smart actuators exhibit rate-dependant hysteresis when the working frequency is higher than 5Hz. Although the Preisach model has been a very powerful tool to model the static hysteresis, it cannot be directly used to model the dynamic hysteresis. Some researchers have proposed various generalizations of the Preisach operator to model the rate-dependant hysteresis, however, most of them are application-dependant and only valid for low frequency range. In this thesis, a first-order dynamic relay operator is proposed. It is then used to build a novel dynamic Preisach model. It can be used to model general dynamic hysteresis and is valid for a large frequency range. Real experiment data of magnetostrictive actuator is used to test the proposed model. Experiments have shown that the proposed model can predict all the static major and minor loops very well and at the same time give an accurate prediction for the dynamic hysteresis loops. The controller design using the proposed model is also studied. An inversion algorithm is developed and a PID controller with inverse hysteresis compensation is proposed and tested through simulations. The results show that the PID controller with inverse compensation is good at regulating control; its tracking performance is really limited (average error is 10 micron), especially for high frequency signals. Hence, a simplified predictive control scheme is developed to improve the tracking performance. It is proved through experiments that the proposed predictive controller can reduce the average tracking error to 2 micron while preserve a good regulating performance

Adaptive Control

Adaptive control has been a remarkable field for industrial and academic research since 1950s. Since more and more adaptive algorithms are applied in various control applications, it is becoming very important for practical implementation. As it can be confirmed from the increasing number of conferences and journals on adaptive control topics, it is certain that the adaptive control is a significant guidance for technology development.The authors the chapters in this book are professionals in their areas and their recent research results are presented in this book which will also provide new ideas for improved performance of various control application problems

Investigating the Role of Mechanical Properties in Biological Systems

There is considerable interest in measuring, with nanoscale spatial resolution, the physical and material properties of biological membranes and whole cells because of their role in the physiology of living systems. The atomic force microscope (AFM) has proven to be particularly well-suited for biological studies because samples can be maintained in near physiological conditions to preserve sample integrity (such as in a buffer solution at a physiologically relevant pH or temperature), and the imaging process is relatively nondestructive. In this work, the mechanical properties of supported lipid bilayers and neurons were examined using AFM-based techniques. Specifically, tapping mode AFM-based techniques were used to investigate the influence of lipid composition and temperature fluctuations on the physicomechanical properties of supported lipid bilayers. Topographic images were produced by tapping mode AFM, while additional compositional contrast and mechanical information was gained from phase contrast imaging, higher harmonic imaging, and scanning probe acceleration microscopy (SPAM). Importantly, all of this data was acquired simultaneously during the tapping mode AFM imaging process and the same imaging parameters were used for each experiment so that fair mechanical comparisons could be made across experiments. Lastly, force-distance curves and force volume imaging were used to better understand the effect of microtubule disruption or stabilization on the toxic ability of amyloid-beta1-42 aggregates, which are implicated in the development of Alzheimer\u27s disease. Overall, the work presented in this dissertation improved techniques for studies in mechanobiology and examined how biologically relevant factors affect the mechanical properties of lipid membranes or whole cells

Discrete Modeling and Sliding Mode Control of Piezoelectric Actuators

With the ability to generate fine displacements with a resolution down to sub-nanometers, piezoelectric actuators (PEAs) have found wide applications in various nano-positioning systems. However, existence of various effects in PEAs, such as hysteresis and creep, as well as dynamics can seriously degrade the PEA performance or even lead to instability. This raises a great need to model and control PEAs for improved performance, which have drawn remarkable attention in the literature. Sliding mode control (SMC) shows its potential to the control of PEA, by which the hysteresis and other nonlinear effects can be regard as disturbance to the dynamic model and thus rejected or compensated by its switching control. To implement SMC in digital computers, this research is aimed at developing novel discrete models and discrete SMC (DSMC)-based control schemes for PEAs, along with their experimental validation. The first part of this thesis concerns with the modeling and control of one-degree of freedom (DOF) PEA, which can be treated as a single-input-single-output (SISO) system. Specifically, a novel discrete model based on the concept of auto-regressive moving average (ARMA) was developed for the PEA hysteresis; and to compensate for the PEA hysteresis and improve its dynamics, an output tracking integrated discrete proportional-integral-derivative-based SMC (PID-SMC) was developed. On this basis, by making use of the availability of PEA hysteresis models, two control schemes, named “the discrete inversion feedforward based PID-SMC” and “the discrete disturbance observer (DOB)-based PID-SMC”, were further developed. To illustrate the effectiveness of the developed models and control schemes, experiments were designed and conducted on a commercially available one-DOF PEA, as compared with the existing ones. The second part of the thesis presents the extension of the developed modeling and control methods to multi-DOF PEAs. Given the fact that details with regard to the PEA internal configurations is not typically provided by the manufacturer, a state space model based on the black box system identification was developed for the three-DOF PEA. The developed model was then integrated in the output tracking based discrete PID-SMC, with its effectiveness verified through the experiments on a commercially available three-DOF PEA. The superiority of the proposed control method over the conventional PID controller was also experimentally investigated and demonstrated. Finally, by integrating with a DOB in the discrete PID-based SMC, a novel control scheme is resulted to compensate for the nonlinearities of the three-DOF PEA. To verify its effectiveness, the discrete DOB based PID-SMC was applied in the control experiments and compared with the existing SMC. The significance of this research lies in the development of the discrete models and PID-based SMC for PEAs, which is of great help to improve their performance. The successful application of the proposed method in the control of multi-DOF PEA allows the application of SMC to the control of complicated multi-inputs-multi-outputs (MIMO) systems without details regarding the internal configuration. Also, integration of the inversion based feedforward control and the DOB in the SMC design has been proven effective for the tracking control of PEAs

Control of mechanical systems with backlash problem

Master'sMASTER OF ENGINEERIN

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance