Optimal Exploitation of the Sentinel-2 Spectral Capabilities for Crop Leaf Area Index Mapping

The continuously increasing demand of accurate quantitative high quality information on land surface properties will be faced by a new generation of environmental Earth observation (EO) missions. One current example, associated with a high potential to contribute to those demands, is the multi-spectral ESA Sentinel-2 (S2) system. The present study focuses on the evaluation of spectral information content needed for crop leaf area index (LAI) mapping in view of the future sensors. Data from a field campaign were used to determine the optimal spectral sampling from available S2 bands applying inversion of a radiative transfer model (PROSAIL) with look-up table (LUT) and artificial neural network (ANN) approaches. Overall LAI estimation performance of the proposed LUT approach (LUTN₅₀) was comparable in terms of retrieval performances with a tested and approved ANN method. Employing seven- and eight-band combinations, the LUTN₅₀ approach obtained LAI RMSE of 0.53 and normalized LAI RMSE of 0.12, which was comparable to the results of the ANN. However, the LUTN50 method showed a higher robustness and insensitivity to different band settings. Most frequently selected wavebands were located in near infrared and red edge spectral regions. In conclusion, our results emphasize the potential benefits of the Sentinel-2 mission for agricultural applications

Optimal modelling and experimentation for the improved sustainability of microfluidic chemical technology design

Optimization of the dynamics and control of chemical processes holds the promise of improved sustainability for chemical technology by minimizing resource wastage. Anecdotally, chemical plant may be substantially over designed, say by 35-50%, due to designers taking account of uncertainties by providing greater flexibility. Once the plant is commissioned, techniques of nonlinear dynamics analysis can be used by process systems engineers to recoup some of this overdesign by optimization of the plant operation through tighter control. At the design stage, coupling the experimentation with data assimilation into the model, whilst using the partially informed, semi-empirical model to predict from parametric sensitivity studies which experiments to run should optimally improve the model. This approach has been demonstrated for optimal experimentation, but limited to a differential algebraic model of the process. Typically, such models for online monitoring have been limited to low dimensions. Recently it has been demonstrated that inverse methods such as data assimilation can be applied to PDE systems with algebraic constraints, a substantially more complicated parameter estimation using finite element multiphysics modelling. Parametric sensitivity can be used from such semi-empirical models to predict the optimum placement of sensors to be used to collect data that optimally informs the model for a microfluidic sensor system. This coupled optimum modelling and experiment procedure is ambitious in the scale of the modelling problem, as well as in the scale of the application - a microfluidic device. In general, microfluidic devices are sufficiently easy to fabricate, control, and monitor that they form an ideal platform for developing high dimensional spatio-temporal models for simultaneously coupling with experimentation. As chemical microreactors already promise low raw materials wastage through tight control of reagent contacting, improved design techniques should be able to augment optimal control systems to achieve very low resource wastage. In this paper, we discuss how the paradigm for optimal modelling and experimentation should be developed and foreshadow the exploitation of this methodology for the development of chemical microreactors and microfluidic sensors for online monitoring of chemical processes. Improvement in both of these areas bodes to improve the sustainability of chemical processes through innovative technology. (C) 2008 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved

A Novel Multiplex Network-based Sensor Information Fusion Model and Its Application to Industrial Multiphase Flow System

This work was supported by National Natural Science Foundation of China under Grant No. 61473203, and the Natural Science Foundation of Tianjin, China under Grant No. 16JCYBJC18200.Peer reviewedPostprin

Feedback Controlled Software Systems

Software systems generally suffer from a certain fragility in the face of disturbances such as bugs, unforeseen user input, unmodeled interactions with other software components, and so on. A single such disturbance can make the machine on which the software is executing hang or crash. We postulate that what is required to address this fragility is a general means of using feedback to stabilize these systems. In this paper we develop a preliminary dynamical systems model of an arbitrary iterative software process along with the conceptual framework for stabilizing it in the presence of disturbances. To keep the computational requirements of the controllers low, randomization and approximation are used. We describe our initial attempts to apply the model to a faulty list sorter, using feedback to improve its performance. Methods by which software robustness can be enhanced by distributing a task between nodes each of which are capable of selecting the best input to process are also examined, and the particular case of a sorting system consisting of a network of partial sorters, some of which may be buggy or even malicious, is examined

Deep convolutional neural networks for estimating porous material parameters with ultrasound tomography

We study the feasibility of data based machine learning applied to ultrasound tomography to estimate water-saturated porous material parameters. In this work, the data to train the neural networks is simulated by solving wave propagation in coupled poroviscoelastic-viscoelastic-acoustic media. As the forward model, we consider a high-order discontinuous Galerkin method while deep convolutional neural networks are used to solve the parameter estimation problem. In the numerical experiment, we estimate the material porosity and tortuosity while the remaining parameters which are of less interest are successfully marginalized in the neural networks-based inversion. Computational examples confirms the feasibility and accuracy of this approach

Passive acoustic quantification of gas releases

The assessment of undersea gas leakages from anthropogenic and natural sources is becoming increasingly important. This includes the detection of gas leaks and the quantification of gas flux. This has applications within oceanography (e.g. natural methane seeps) and the oil and gas industry (e.g. leaks from undersea gas pipelines, carbon capture and storage facilities). Gas escaping underwater can result in the formation of gas bubbles, and this leads to specific acoustic pressure fluctuations (sound) which can be analysed using passive acoustic systems. Such a technique offers the advantage of lower electrical power requirements for long term monitoring. It is common practice for researchers to identify single bubble injection events from time histories or time frequency representations of hydrophone data, and infer bubble sizes from the centre frequency of the emission. Such a technique is well suited for gas releases that represent low flow rates, and involving solitary bubble release. However, for larger events, with the overlapping of bubble acoustic emissions, the inability to discriminate each individual bubble injection event makes this approach inappropriate. In this study, an inverse method to quantify such release is used. The model is first outlined and following this its accuracy at different flow rate regimes is tested against experimental data collected from tests which took place in a large water tank. The direct measurements are compared to estimates inferred from acoustics.<br/