Optimization of EOQ Model with Limited Storage Capacity by Neutrosophic Geometric Programming

In this article, we present deterministic single objective economic order quantity model with limited storage capacity in neutrosophic environment. We consider variable limit production cost and time dependent holding cost into account. Here we minimize total average cost of proposed model by applying neutrosophic geometric programming, which is obtained by extending existing fuzzy and intuitionistic fuzzy geometric programming for solving resultant non-linear optimization model. Next we consider numerical application to show that optimal solution obtained by neutrosophic geometric programming is more desirable than that of crisp, fuzzy and intuitionistic fuzzy geometric programming. Also we perform sensitivity analysis of parameters and present key managerial insights

NEUTROSOPHIC MULTI-OBJECTIVE LINEAR PROGRAMMING

For modeling imprecise and indeterminate data for multi-objective decision making, two different methods: neutrosophic multi-objective linear/non-linear programming neutrosophic goal programming, which have been very recently proposed in the literatuire. In many economic problems, the well-known probabilities or fuzzy solutions procedures are not suitable because they cannot deal the situation when indeterminacy inherently involves in the problem. In this case we propose a new concept in optimization problem under uncertainty and indeterminacy. It is an extension of fuzzy and intuitionistic fuzzy optimization in which the degrees of indeterminacy and falsity (rejection) of objectives and constraints are simultaneously considered together with the degrees of truth membership (satisfaction/acceptance). The drawbacks of the existing neutrosophic optimization models have been presented and new framework of multi-objective optimization in neutrosophic environment has been proposed. The essence of the proposed approach is that it is capable of dealing with indeterminacy and falsity simultaneously

Intuitionistic fuzzy-based TOPSIS method for multi-criterion optimization problem: a novel compromise methodology

The decision-making process is characterized by some doubt or hesitation due to the existence of uncertainty among some objectives or criteria. In this sense, it is quite difficult for decision maker(s) to reach the precise/exact solutions for these objectives. In this study, a novel approach based on integrating the technique for order preference by similarity to ideal solution (TOPSIS) with the intuitionistic fuzzy set (IFS), named TOPSIS-IFS, for solving a multi-criterion optimization problem (MCOP) is proposed. In this context, the TOPSIS-IFS operates with two phases to reach the best compromise solution (BCS). First, the TOPSIS approach aims to characterize the conflicting natures among objectives by reducing these objectives into only two objectives. Second, IFS is incorporated to obtain the solution model under the concept of indeterminacy degree by defining two membership functions for each objective (i.e., satisfaction degree, dissatisfaction degree). The IFS can provide an effective framework that reflects the reality contained in any decision-making process. The proposed TOPSIS-IFS approach is validated by carrying out an illustrative example. The obtained solution by the approach is superior to those existing in the literature. Also, the TOPSIS-IFS approach has been investigated through solving the multi-objective transportation problem (MOTP) as a practical problem. Furthermore, impacts of IFS parameters are analyzed based on Taguchi method to demonstrate their effects on the BCS. Finally, this integration depicts a new philosophy in the mathematical programming field due to its interesting principles

Comprehensive quantity discount model for dynamic green supplier selection and order allocation

We model and solve a deterministic multi-period single-product green supplier selection and order allocation problem in which the considered suppliers’ availability, cost, and green performance change from one period to another in the planning horizon. Moreover, the available suppliers may offer an all-unit or an incremental quantity discount (QD) scheme, resulting in three problem configurations. In one configuration, all suppliers offer all-unit QD. In the second, all suppliers offer incremental QD. In the third, some suppliers offer all-unit QD, and others offer incremental QD. The problem is modelled using a bi-objective integer linear programming formulation that maximizes the total green value of the purchased items from all the suppliers and minimizes their total corresponding cost, including the fixed cost, variable cost, inventory holding cost, and shortage cost. The proposed bi-objective model is scalarized and solved using the branch-and-cut algorithm and a population-based heuristic. A numerical analysis is conducted, which allows first to validate the heuristic approach using small-size instances by comparing its results with those of the exact approach. Moreover, an extensive comparison between the exact and heuristic solution approaches is carried out. The results reveal different findings. First, the economic and environmental solutions of an instance are different, and the environmental solution is independent of the suppliers’ pricing schemes. Second, the maximum difference between the heuristic approach and the exact approach in terms of the bi-objective function value is 4.72%, which makes the proposed heuristic recommended for large-size instances due to its short computation time and good accuracy. Third, there is no difference in terms of the heuristic performance between the combined model and the models with a single type of discount. Fourth, the all-unit discount scheme seems to be generally better in terms of the trade-off between the green value of purchasing and cost

Sustainable Inventory Management Model for High-Volume Material with Limited Storage Space under Stochastic Demand and Supply

Inventory management and control has become an important management function, which is vital in ensuring the efficiency and profitability of a company’s operations. Hence, several research studies attempted to develop models to be used to minimise the quantities of excess inventory, in order to reduce their associated costs without compromising both operational efficiency and customers’ needs. The Economic Order Quantity (EOQ) model is one of the most used of these models; however, this model has a number of limiting assumptions, which led to the development of a number of extensions for this model to increase its applicability to the modern-day business environment. Therefore, in this research study, a sustainable inventory management model is developed based on the EOQ concept to optimise the ordering and storage of large-volume inventory, which deteriorates over time, with limited storage space, such as steel, under stochastic demand, supply and backorders. Two control systems were developed and tested in this research study in order to select the most robust system: an open-loop system, based on direct control through which five different time series for each stochastic variable were generated, before an attempt to optimise the average profit was conducted; and a closed-loop system, which uses a neural network, depicting the different business and economic conditions associated with the steel manufacturing industry, to generate the optimal control parameters for each week across the entire planning horizon. A sensitivity analysis proved that the closed-loop neural network control system was more accurate in depicting real-life business conditions, and more robust in optimising the inventory management process for a large-volume, deteriorating item. Moreover, due to its advantages over other techniques, a meta-heuristic Particle Swarm Optimisation (PSO) algorithm was used to solve this model. This model is implemented throughout the research in the case of a steel manufacturing factory under different operational and extreme economic scenarios. As a result of the case study, the developed model proved its robustness and accuracy in managing the inventory of such a unique industry

Models and Algorithms for the Optimisation of Replenishment, Production and Distribution Plans in Industrial Enterprises

Tesis por compendio[ES] La optimización en las empresas manufactureras es especialmente importante, debido a las grandes inversiones que realizan, ya que a veces estas inversiones no obtienen el rendimiento esperado porque los márgenes de beneficio de los productos son muy ajustados. Por ello, las empresas tratan de maximizar el uso de los recursos productivos y financieros minimizando el tiempo perdido y, al mismo tiempo, mejorando los flujos de los procesos y satisfaciendo las necesidades del mercado. El proceso de planificación es una actividad crítica para las empresas. Esta tarea implica grandes retos debido a los cambios del mercado, las alteraciones en los procesos de producción dentro de la empresa y en la cadena de suministro, y los cambios en la legislación, entre otros. La planificación del aprovisionamiento, la producción y la distribución desempeña un papel fundamental en el rendimiento de las empresas manufactureras, ya que una planificación ineficaz de los proveedores, los procesos de producción y los sistemas de distribución contribuye a aumentar los costes de los productos, a alargar los plazos de entrega y a reducir los beneficios. La planificación eficaz es un proceso complejo que abarca una amplia gama de actividades para garantizar que los equipos, los materiales y los recursos humanos estén disponibles en el momento y el lugar adecuados. Motivados por la complejidad de la planificación en las empresas manufactureras, esta tesis estudia y desarrolla herramientas cuantitativas para ayudar a los planificadores en los procesos de la planificación del aprovisionamiento, producción y distribución. Desde esta perspectiva, se proponen modelos realistas y métodos eficientes para apoyar la toma de decisiones en las empresas industriales, principalmente en las pequeñas y medianas empresas (PYMES). Las aportaciones de esta tesis suponen un avance científico basado en una exhaustiva revisión bibliográfica sobre la planificación del aprovisionamiento, la producción y la distribución que ayuda a comprender los principales modelos y algoritmos utilizados para resolver estos planes, y pone en relieve las tendencias y las futuras direcciones de investigación. También proporciona un marco holístico para caracterizar los modelos y algoritmos centrándose en la planificación de la producción, la programación y la secuenciación. Esta tesis también propone una herramienta de apoyo a la decisión para seleccionar un algoritmo o método de solución para resolver problemas concretos de la planificación del aprovisionamiento, producción y distribución en función de su complejidad, lo que permite a los planificadores no duplicar esfuerzos de modelización o programación de técnicas de solución. Por último, se desarrollan nuevos modelos matemáticos y enfoques de solución de última generación, como los algoritmos matheurísticos, que combinan la programación matemática y las técnicas metaheurísticas. Los nuevos modelos y algoritmos comprenden mejoras en términos de rendimiento computacional, e incluyen características realistas de los problemas del mundo real a los que se enfrentan las empresas de fabricación. Los modelos matemáticos han sido validados con un caso de una importante empresa del sector de la automoción en España, lo que ha permitido evaluar la relevancia práctica de estos novedosos modelos utilizando instancias de gran tamaño, similares a las existentes en la empresa objeto de estudio. Además, los algoritmos matheurísticos han sido probados utilizando herramientas libres y de código abierto. Esto también contribuye a la práctica de la investigación operativa, y proporciona una visión de cómo desplegar estos métodos de solución y el tiempo de cálculo y rendimiento de la brecha que se puede obtener mediante el uso de software libre o de código abierto.[CA] L'optimització a les empreses manufactureres és especialment important, a causa de les grans inversions que realitzen, ja que de vegades aquestes inversions no obtenen el rendiment esperat perquè els marges de benefici dels productes són molt ajustats. Per això, les empreses intenten maximitzar l'ús dels recursos productius i financers minimitzant el temps perdut i, alhora, millorant els fluxos dels processos i satisfent les necessitats del mercat. El procés de planificació és una activitat crítica per a les empreses. Aquesta tasca implica grans reptes a causa dels canvis del mercat, les alteracions en els processos de producció dins de l'empresa i la cadena de subministrament, i els canvis en la legislació, entre altres. La planificació de l'aprovisionament, la producció i la distribució té un paper fonamental en el rendiment de les empreses manufactureres, ja que una planificació ineficaç dels proveïdors, els processos de producció i els sistemes de distribució contribueix a augmentar els costos dels productes, allargar els terminis de lliurament i reduir els beneficis. La planificació eficaç és un procés complex que abasta una àmplia gamma d'activitats per garantir que els equips, els materials i els recursos humans estiguen disponibles al moment i al lloc adequats. Motivats per la complexitat de la planificació a les empreses manufactureres, aquesta tesi estudia i desenvolupa eines quantitatives per ajudar als planificadors en els processos de la planificació de l'aprovisionament, producció i distribució. Des d'aquesta perspectiva, es proposen models realistes i mètodes eficients per donar suport a la presa de decisions a les empreses industrials, principalment a les petites i mitjanes empreses (PIMES). Les aportacions d'aquesta tesi suposen un avenç científic basat en una exhaustiva revisió bibliogràfica sobre la planificació de l'aprovisionament, la producció i la distribució que ajuda a comprendre els principals models i algorismes utilitzats per resoldre aquests plans, i posa de relleu les tendències i les futures direccions de recerca. També proporciona un marc holístic per caracteritzar els models i algorismes centrant-se en la planificació de la producció, la programació i la seqüenciació. Aquesta tesi també proposa una eina de suport a la decisió per seleccionar un algorisme o mètode de solució per resoldre problemes concrets de la planificació de l'aprovisionament, producció i distribució en funció de la seua complexitat, cosa que permet als planificadors no duplicar esforços de modelització o programació de tècniques de solució. Finalment, es desenvolupen nous models matemàtics i enfocaments de solució d'última generació, com ara els algoritmes matheurístics, que combinen la programació matemàtica i les tècniques metaheurístiques. Els nous models i algoritmes comprenen millores en termes de rendiment computacional, i inclouen característiques realistes dels problemes del món real a què s'enfronten les empreses de fabricació. Els models matemàtics han estat validats amb un cas d'una important empresa del sector de l'automoció a Espanya, cosa que ha permés avaluar la rellevància pràctica d'aquests nous models utilitzant instàncies grans, similars a les existents a l'empresa objecte d'estudi. A més, els algorismes matheurístics han estat provats utilitzant eines lliures i de codi obert. Això també contribueix a la pràctica de la investigació operativa, i proporciona una visió de com desplegar aquests mètodes de solució i el temps de càlcul i rendiment de la bretxa que es pot obtindre mitjançant l'ús de programari lliure o de codi obert.[EN] Optimisation in manufacturing companies is especially important, due to the large investments they make, as sometimes these investments do not obtain the expected return because the profit margins of products are very tight. Therefore, companies seek to maximise the use of productive and financial resources by minimising lost time and, at the same time, improving process flows while meeting market needs. The planning process is a critical activity for companies. This task involves great challenges due to market changes, alterations in production processes within the company and in the supply chain, and changes in legislation, among others. Planning of replenishment, production and distribution plays a critical role in the performance of manufacturing companies because ineffective planning of suppliers, production processes and distribution systems contributes to higher product costs, longer lead times and less profits. Effective planning is a complex process that encompasses a wide range of activities to ensure that equipment, materials and human resources are available in the right time and the right place. Motivated by the complexity of planning in manufacturing companies, this thesis studies and develops quantitative tools to help planners in the replenishment, production and delivery planning processes. From this perspective, realistic models and efficient methods are proposed to support decision making in industrial companies, mainly in small- and medium-sized enterprises (SMEs). The contributions of this thesis represent a scientific breakthrough based on a comprehensive literature review about replenishment, production and distribution planning that helps to understand the main models and algorithms used to solve these plans, and highlights trends and future research directions. It also provides a holistic framework to characterise models and algorithms by focusing on production planning, scheduling and sequencing. This thesis also proposes a decision support tool for selecting an algorithm or solution method to solve concrete replenishment, production and distribution planning problems according to their complexity, which allows planners to not duplicate efforts modelling or programming solution techniques. Finally, new state-of-the-art mathematical models and solution approaches are developed, such as matheuristic algorithms, which combine mathematical programming and metaheuristic techniques. The new models and algorithms comprise improvements in computational performance terms, and include realistic features of real-world problems faced by manufacturing companies. The mathematical models have been validated with a case of an important company in the automotive sector in Spain, which allowed to evaluate the practical relevance of these novel models using large instances, similarly to those existing in the company under study. In addition, the matheuristic algorithms have been tested using free and open-source tools. This also helps to contribute to the practice of operations research, and provides insight into how to deploy these solution methods and the computational time and gap performance that can be obtained by using free or open-source software.This work would not have been possible without the following funding sources: Conselleria de Educación, Investigación, Cultura y Deporte, Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014-2020. Conselleria de Educación, Investigación, Cultura y Deporte, Generalitat Valenciana for predoctoral contract students to stay in research centers outside the research centers outside the Valencian Community (BEFPI/2021/040) and the European Social Fund.Guzmán Ortiz, BE. (2022). Models and Algorithms for the Optimisation of Replenishment, Production and Distribution Plans in Industrial Enterprises [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/187461Compendi

Uncertain Multi-Criteria Optimization Problems

Most real-world search and optimization problems naturally involve multiple criteria as objectives. Generally, symmetry, asymmetry, and anti-symmetry are basic characteristics of binary relationships used when modeling optimization problems. Moreover, the notion of symmetry has appeared in many articles about uncertainty theories that are employed in multi-criteria problems. Different solutions may produce trade-offs (conflicting scenarios) among different objectives. A better solution with respect to one objective may compromise other objectives. There are various factors that need to be considered to address the problems in multidisciplinary research, which is critical for the overall sustainability of human development and activity. In this regard, in recent decades, decision-making theory has been the subject of intense research activities due to its wide applications in different areas. The decision-making theory approach has become an important means to provide real-time solutions to uncertainty problems. Theories such as probability theory, fuzzy set theory, type-2 fuzzy set theory, rough set, and uncertainty theory, available in the existing literature, deal with such uncertainties. Nevertheless, the uncertain multi-criteria characteristics in such problems have not yet been explored in depth, and there is much left to be achieved in this direction. Hence, different mathematical models of real-life multi-criteria optimization problems can be developed in various uncertain frameworks with special emphasis on optimization problems

Applying a hybrid MCDM technique in warehouse management

The main goal of this study is to apply Multi-Criteria Decision Making (MCDM) in managing a warehouse. One of the elements that could impact organization performance is warehouse management. Surplus inventory imposes some ad- ditional costs on the organization, and inadequate inventory stops the operation of an organization. For managing and controlling warehouse inventories, the MCDM method is recommended in this study. The inventories are categorized ba- sed on multi-criteria instead of a single criterion in ABC. To specify the criteria’s weight, Best-Worst Method is used, and to reach the final score of spare parts, the Analytical Hierarchy Process, and Technique for Order of Preference by Similarity to Ideal Solution is applied. Some strategies for managing and controlling organizations’ warehouse is recommended