975 research outputs found

    Energy management in communication networks: a journey through modelling and optimization glasses

    Full text link
    The widespread proliferation of Internet and wireless applications has produced a significant increase of ICT energy footprint. As a response, in the last five years, significant efforts have been undertaken to include energy-awareness into network management. Several green networking frameworks have been proposed by carefully managing the network routing and the power state of network devices. Even though approaches proposed differ based on network technologies and sleep modes of nodes and interfaces, they all aim at tailoring the active network resources to the varying traffic needs in order to minimize energy consumption. From a modeling point of view, this has several commonalities with classical network design and routing problems, even if with different objectives and in a dynamic context. With most researchers focused on addressing the complex and crucial technological aspects of green networking schemes, there has been so far little attention on understanding the modeling similarities and differences of proposed solutions. This paper fills the gap surveying the literature with optimization modeling glasses, following a tutorial approach that guides through the different components of the models with a unified symbolism. A detailed classification of the previous work based on the modeling issues included is also proposed

    A Survey of Green Networking Research

    Full text link
    Reduction of unnecessary energy consumption is becoming a major concern in wired networking, because of the potential economical benefits and of its expected environmental impact. These issues, usually referred to as "green networking", relate to embedding energy-awareness in the design, in the devices and in the protocols of networks. In this work, we first formulate a more precise definition of the "green" attribute. We furthermore identify a few paradigms that are the key enablers of energy-aware networking research. We then overview the current state of the art and provide a taxonomy of the relevant work, with a special focus on wired networking. At a high level, we identify four branches of green networking research that stem from different observations on the root causes of energy waste, namely (i) Adaptive Link Rate, (ii) Interface proxying, (iii) Energy-aware infrastructures and (iv) Energy-aware applications. In this work, we do not only explore specific proposals pertaining to each of the above branches, but also offer a perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate; Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications. 18 pages, 6 figures, 2 table

    An Energy-autonomous Wireless Sensor Network Development Platform

    Get PDF
    Internet-of-things enabled applications are increasingly popular and are expected to spread even more in the next few years. Energy efficiency is fundamental to support the widespread use of such systems. This paper presents a practical framework for the development and the evaluation of low-power Wireless Sensor Networks equipped with energy harvesting, aiming at energy-autonomous applications. An experimental case study demonstrates the capabilities of the solution

    An embedded sensor node microcontroller with crypto-processors

    Get PDF
    Wireless sensor network applications range from industrial automation and control, agricultural and environmental protection, to surveillance and medicine. In most applications, data are highly sensitive and must be protected from any type of attack and abuse. Security challenges in wireless sensor networks are mainly defined by the power and computing resources of sensor devices, memory size, quality of radio channels and susceptibility to physical capture. In this article, an embedded sensor node microcontroller designed to support sensor network applications with severe security demands is presented. It features a low power 16-bitprocessor core supported by a number of hardware accelerators designed to perform complex operations required by advanced crypto algorithms. The microcontroller integrates an embedded Flash and an 8-channel 12-bit analog-to-digital converter making it a good solution for low-power sensor nodes. The article discusses the most important security topics in wireless sensor networks and presents the architecture of the proposed hardware solution. Furthermore, it gives details on the chip implementation, verification and hardware evaluation. Finally, the chip power dissipation and performance figures are estimated and analyzed

    Green IT - dynamic network topologies

    Get PDF
    All engineering disciplines are influenced by the global focus on energy consumption reduction and sustainability. Due to its resident inefficiency, The ICT sector is of particular concern, and there has been extensive work to develop sustainability enhancements to networks and/or network devices. Previous work presented dynamic topology concepts in which the behaviour and topology of the devices and the network react dynamically in response to traffic demands, with the intent of placing devices into standby states to reduce energy consumption. The key aim of this study is to develop a dynamic topology mechanism implementation; it proposes a testbed environment and corresponding dynamic topology mechanism that makes use of two programs: one running on a centralised controller, and one running on the network nodes. The former determines the optimal topology based on energy consumption reductions and network traffic, while the latter uses MPLS to implement the topology. The testbed is used to determine the dynamic topology mechanism’s effectiveness and impact on network performance, and does so by subjecting it to controlled variations in network traffic. Quantitative measurements of the dynamic topology mechanism’s network performance metrics are presented and analysed relative to baseline measurements. The analysis shows that the dynamic topology mechanism is quite effective, as the effect on network performance is mostly minimal and the reaction to network traffic variations is sufficiently swift. The system takes approximately 30 seconds to react to traffic variations and implement topology changes, and has negligible effect on jitter, packet loss, and the number of out of order packets. However, it produces an average increase in delay of 8 ms, the source of which requires further investigation. This study proves the feasibility of dynamic topology mechanism implementation, and provides a framework for further development and eventual widespread deployment

    Dynamic Voltage and Frequency Scaling for Wireless Network-on-Chip

    Get PDF
    Previously, research and design of Network-on-Chip (NoC) paradigms where mainly focused on improving the performance of the interconnection networks. With emerging wide range of low-power applications and energy constrained high-performance applications, it is highly desirable to have NoCs that are highly energy efficient without incurring performance penalty. In the design of high-performance massive multi-core chips, power and heat have become dominant constrains. Increased power consumption can raise chip temperature, which in turn can decrease chip reliability and performance and increase cooling costs. It was proven that Small-world Wireless Network-on-Chip (SWNoC) architecture which replaces multi-hop wire-line path in a NoC by high-bandwidth single hop long range wireless links, reduces the overall energy dissipation when compared to wire-line mesh-based NoC architecture. However, the overall energy dissipation of the wireless NoC is still dominated by wire-line links and switches (buffers). Dynamic Voltage Scaling is an efficient technique for significant power savings in microprocessors. It has been proposed and deployed in modern microprocessors by exploiting the variance in processor utilization. On a Network-on-Chip paradigm, it is more likely that the wire-line links and buffers are not always fully utilized even for different applications. Hence, by exploiting these characteristics of the links and buffers over different traffic, DVFS technique can be incorporated on these switches and wire-line links for huge power savings. In this thesis, a history based DVFS mechanism is proposed. This mechanism uses the past utilization of the wire-line links & buffers to predict the future traffic and accordingly tune the voltage and frequency for the links and buffers dynamically for each time window. This mechanism dynamically minimizes the power consumption while substantially maintaining a high performance over the system. Performance analysis on these DVFS enabled Wireless NoC shows that, the overall energy dissipation is improved by around 40% when compared Small-world Wireless NoCs

    Will SDN be part of 5G?

    Get PDF
    For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

    A quantitative survey of the power saving potential in IP-Over-WDM backbone networks

    Get PDF
    The power consumption in Information and Communication Technologies networks is growing year by year; this growth presents challenges from technical, economic, and environmental points of view. This has lead to a great number of research publications on "green" telecommunication networks. In response, a number of survey works have appeared as well. However, with respect to backbone networks, most survey works: 1) do not allow for an easy cross validation of the savings reported in the various works and 2) nor do they provide a clear overview of the individual and combined power saving potentials. Therefore, in this paper, we survey the reported saving potential in IP-over-WDM backbone telecommunication networks across the existing body of research in that area. We do this by mapping more than ten different approaches to a concise analytical model, which allows us to estimate the combined power reduction potential. Our estimates indicate that the power reduction potential of the once-only approaches is 2.3x in a Moderate Effort scenario and 31x in a Best Effort scenario. Factoring in the historic and projected yearly efficiency improvements ("Moore's law") roughly doubles both values on a ten-year horizon. The large difference between the outcome of Moderate Effort and Best Effort scenarios is explained by the disparity and lack of clarity of the reported saving results and by our (partly) subjective assessment of the feasibility of the proposed approaches. The Moderate Effort scenario will not be sufficient to counter the projected traffic growth, although the Best Effort scenario indicates that sufficient potential is likely available. The largest isolated power reduction potential is available in improving the power associated with cooling and power provisioning and applying sleep modes to overdimensioned equipment

    Green demand aware fog computing : a prediction-based dynamic resource provisioning approach

    Get PDF
    Fog computing could potentially cause the next paradigm shift by extending cloud services to the edge of the network, bringing resources closer to the end-user. With its close proximity to end-users and its distributed nature, fog computing can significantly reduce latency. With the appearance of more and more latency-stringent applications, in the near future, we will witness an unprecedented amount of demand for fog computing. Undoubtedly, this will lead to an increase in the energy footprint of the network edge and access segments. To reduce energy consumption in fog computing without compromising performance, in this paper we propose the Green-Demand-Aware Fog Computing (GDAFC) solution. Our solution uses a prediction technique to identify the working fog nodes (nodes serve when request arrives), standby fog nodes (nodes take over when the computational capacity of the working fog nodes is no longer sufficient), and idle fog nodes in a fog computing infrastructure. Additionally, it assigns an appropriate sleep interval for the fog nodes, taking into account the delay requirement of the applications. Results obtained based on the mathematical formulation show that our solution can save energy up to 65% without deteriorating the delay requirement performance. © 2022 by the authors. Licensee MDPI, Basel, Switzerland
    • …
    corecore