Guest Editorial—Special Issue on Selected Papers From ISCAS 2009

Published versio

A Power-Efficient Bio-Potential Acquisition Device with DS-MDE Sensors for Long-Term Healthcare Monitoring Applications

This work describes a power-efficient bio-potential acquisition device for long-term healthcare applications that is implemented using novel microelectromechanical dry electrodes (MDE) and a low power bio-potential processing chip. Using micromachining technology, an attempt is also made to enhance the sensing reliability and stability by fabricating a diamond-shaped MDE (DS-MDE) that has a satisfactory self-stability capability and superior electric conductivity when attached onto skin without any extra skin tissue injury technology. To acquire differential bio-potentials such as ECG signals, the proposed processing chip fabricated in a standard CMOS process has a high common mode rejection ratio (C.M.R.R.) differential amplifier and a 12-bit analog-to-digital converter (ADC). Use of the proposed system and integrate simple peripheral commercial devices can obtain the ECG signal efficiently without additional skin tissue injury and ensure continuous monitoring more than 70 hours with a 400 mAh battery

New Blind Block Synchronization for Transceivers Using Redundant Precoders

This paper studies the blind block synchronization problem in block transmission systems using linear redundant precoders (LRP). Two commonly used LRP systems, namely, zero padding (ZP) and cyclic prefix (CP) systems, are considered in this paper. In particular, the block synchronization problem in CP systems is a broader version of timing synchronization problem in the popular orthogonal frequency division multiplexing (OFDM) systems. The proposed algorithms exploit the rank deficiency property of the matrix composed of received blocks when the block synchronization is perfect and use a parameter called repetition index which can be chosen as any positive integer. Theoretical results suggest advantages in blind block synchronization performances when using a large repetition index. Furthermore, unlike previously reported algorithms, which require a large amount of received data, the proposed methods, with properly chosen repetition indices, guarantee correct block synchronization in absence of noise using only two received blocks in ZP systems and three in CP systems. Computer simulations are conducted to evaluate the performances of the proposed algorithms and compare them with previously reported algorithms. Simulation results not only verify the capability of the proposed algorithms to work with limited received data but also show significant improvements in the block synchronization error rate performance of the proposed algorithms over previously reported algorithms

Recent Advances in Neural Recording Microsystems

The accelerating pace of research in neuroscience has created a considerable demand for neural interfacing microsystems capable of monitoring the activity of large groups of neurons. These emerging tools have revealed a tremendous potential for the advancement of knowledge in brain research and for the development of useful clinical applications. They can extract the relevant control signals directly from the brain enabling individuals with severe disabilities to communicate their intentions to other devices, like computers or various prostheses. Such microsystems are self-contained devices composed of a neural probe attached with an integrated circuit for extracting neural signals from multiple channels, and transferring the data outside the body. The greatest challenge facing development of such emerging devices into viable clinical systems involves addressing their small form factor and low-power consumption constraints, while providing superior resolution. In this paper, we survey the recent progress in the design and the implementation of multi-channel neural recording Microsystems, with particular emphasis on the design of recording and telemetry electronics. An overview of the numerous neural signal modalities is given and the existing microsystem topologies are covered. We present energy-efficient sensory circuits to retrieve weak signals from neural probes and we compare them. We cover data management and smart power scheduling approaches, and we review advances in low-power telemetry. Finally, we conclude by summarizing the remaining challenges and by highlighting the emerging trends in the field

MIMO Transceivers With Decision Feedback and Bit Loading: Theory and Optimization

This paper considers MIMO transceivers with linear precoders and decision feedback equalizers (DFEs), with bit allocation at the transmitter. Zero-forcing (ZF) is assumed. Considered first is the minimization of transmitted power, for a given total bit rate and a specified set of error probabilities for the symbol streams. The precoder and DFE matrices are optimized jointly with bit allocation. It is shown that the generalized triangular decomposition (GTD) introduced by Jiang, Li, and Hager offers an optimal family of solutions. The optimal linear transceiver (which has a linear equalizer rather than a DFE) with optimal bit allocation is a member of this family. This shows formally that, under optimal bit allocation, linear and DFE transceivers achieve the same minimum power. The DFE transceiver using the geometric mean decomposition (GMD) is another member of this optimal family, and is such that optimal bit allocation yields identical bits for all symbol streams—no bit allocation is necessary—when the specified error probabilities are identical for all streams. The QR-based system used in VBLAST is yet another member of the optimal family and is particularly well-suited when limited feedback is allowed from receiver to transmitter. Two other optimization problems are then considered: a) minimization of power for specified set of bit rates and error probabilities (the QoS problem), and b) maximization of bit rate for fixed set of error probabilities and power. It is shown in both cases that the GTD yields an optimal family of solutions

Estimation of Autoregressive Parameters from Noisy Observations Using Iterated Covariance Updates

Estimating the parameters of the autoregressive (AR) random process is a problem that has been well-studied. In many applications, only noisy measurements of AR process are available. The effect of the additive noise is that the system can be modeled as an AR model with colored noise, even when the measurement noise is white, where the correlation matrix depends on the AR parameters. Because of the correlation, it is expedient to compute using multiple stacked observations. Performing a weighted least-squares estimation of the AR parameters using an inverse covariance weighting can provide significantly better parameter estimates, with improvement increasing with the stack depth. The estimation algorithm is essentially a vector RLS adaptive filter, with time-varying covariance matrix. Different ways of estimating the unknown covariance are presented, as well as a method to estimate the variances of the AR and observation noise. The notation is extended to vector autoregressive (VAR) processes. Simulation results demonstrate performance improvements in coefficient error and in spectrum estimation

Modelling of the First-Order Time-Varying Filters with Periodically Variable Coefficients

The article is devoted to modelling and analysis of linear time-varying (LTV) filters with periodically variable coefficients. A transmission model of such filters has been described. Equations expressing the filter response for a given class of periodic parametric functions have been obtained and presented in a closed form. The results have been illustrated by an example

Enhanced Compressive Wideband Frequency Spectrum Sensing for Dynamic Spectrum Access

Wideband spectrum sensing detects the unused spectrum holes for dynamic spectrum access (DSA). Too high sampling rate is the main problem. Compressive sensing (CS) can reconstruct sparse signal with much fewer randomized samples than Nyquist sampling with high probability. Since survey shows that the monitored signal is sparse in frequency domain, CS can deal with the sampling burden. Random samples can be obtained by the analog-to-information converter. Signal recovery can be formulated as an L0 norm minimization and a linear measurement fitting constraint. In DSA, the static spectrum allocation of primary radios means the bounds between different types of primary radios are known in advance. To incorporate this a priori information, we divide the whole spectrum into subsections according to the spectrum allocation policy. In the new optimization model, the minimization of the L2 norm of each subsection is used to encourage the cluster distribution locally, while the L0 norm of the L2 norms is minimized to give sparse distribution globally. Because the L0/L2 optimization is not convex, an iteratively re-weighted L1/L2 optimization is proposed to approximate it. Simulations demonstrate the proposed method outperforms others in accuracy, denoising ability, etc.Comment: 23 pages, 6 figures, 4 table. arXiv admin note: substantial text overlap with arXiv:1005.180