Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review

Advances in additive manufacturing technologies facilitate the fabrication of cellular materials that have tailored functional characteristics. The application of solid freeform fabrication techniques is especially exploited in designing scaffolds for tissue engineering. In this review, firstly, a classification of cellular materials from a geometric point of view is proposed; then, the main approaches on geometric modeling of cellular materials are discussed. Finally, an investigation on porous scaffolds fabricated by additive manufacturing technologies is pointed out. Perspectives in geometric modeling of scaffolds for tissue engineering are also proposed

Computer-Aided Conceptual Design Through TRIZ-based Manipulation of Topological Optimizations

Organised by: Cranfield UniversityIn a recent project the authors proposed the adoption of Optimization Systems [1] as a bridging element between Computer-Aided Innovation (CAI) and PLM to identify geometrical contradictions [2], a particular case of the TRIZ physical contradiction [3]. A further development of the research has revealed that the solutions obtained from several topological optimizations can be considered as elementary customized modeling features for a specific design task. The topology overcoming the arising geometrical contradiction can be obtained through a manipulation of the density distributions constituting the conflicting pair. Already two strategies of density combination have been identified as capable to solve geometrical contradictions.Mori Seiki – The Machine Tool Compan

Integration of magnetic amplifier switch model into computer aided design for power converters

Зазвичай у джерелах вторинного електроживлення (ДВЕЖ) комутаційну та регулюючу функції виконують напівпровідникові компоненти. Однак вони не можуть забезпечити високу якість вихідних характеристик у багатоканальних джерелах живлення та в ДВЕЖ із високим рівнем струму навантаження. В таких випадках як силові ключі використовують високочастотні магнітні підсилювачі (ВМП) на основі аморфних магнітом’яких сплавів з прямокутною петлею гістерезису. Розроблення перетворювачів електроенергії на основі ВМП не є повністю автоматизованим. ВМП є магнітним компонентом з нелінійними властивостями. Системи автоматизованого проектування (САПР) для комп’ютерного імітаційного моделювання електричних кіл не призначені для розрахунків магнітних полів та працюють з дискретними електричними компонентами. Існує проблема інтеграції моделі компонента з магнітним гістерезисом у бібліотеку моделей САПР. Крім того, досить складно оцінити оптимальні параметри такого компонента. У статті запропоновано нову математичну модель силового ключа на основі ВМП, що ґрунтується на функції, яку можна генерувати з допомогою цифрових технологій. Досліджено цифровий генератор синуса, що складається з цифрових дискретних компнентів для моделювання силового ключа на основі ВМП. Запропоновану математичну модель силового ключа на основі ВМП інтегровано у САПР. Проведено комп’ютерне імітаційне моделювання електричного кола, що містить ВМП. Розраховано абсолютну похибку та середньоквадратичне відхилення моделі процесів перемагнічення ВМП у порівнянні з експериментально отриманими даними. Така часткова автоматизація процесу розроблення високочастотних перетворювачів електроенергії на основі ВМП суттєво зменшить його складність, тривалість і вартість, а також сприятиме розвиткові нових схемотехнічних рішень.The designing of electrical power converters based on Magnetic Amplifier (MagAmp) switches is not fully automated. MagAmp is a magnetic component with nonlinear properties. Computer aided design (CAD) programmes are built to simulate electric circuits without electromagnetic field with distributed components. There is a problem of integration of a model of a component with magnetic hysteresis into the set of CAD models. In addition, estimation of the optimal parameters of such a component is rather complicated. The article proposes a new model of MagAmp switch which is based on a function that can be generated using digital technology. The digital generator of sinusoidal signals, consisting of discrete digital components for modeling the MagAmp switch, is investigated. Integration of the model into CAD programme and simulation of the electric circuit, which includes MagAmp switch, are obtained. Partial automation will reduce complexity, duration and cost of the design procedure, and will enhance the development of power converters

Development of a Computer Vision-Based Three-Dimensional Reconstruction Method for Volume-Change Measurement of Unsaturated Soils during Triaxial Testing

Problems associated with unsaturated soils are ubiquitous in the U.S., where expansive and collapsible soils are some of the most widely distributed and costly geologic hazards. Solving these widespread geohazards requires a fundamental understanding of the constitutive behavior of unsaturated soils. In the past six decades, the suction-controlled triaxial test has been established as a standard approach to characterizing constitutive behavior for unsaturated soils. However, this type of test requires costly test equipment and time-consuming testing processes. To overcome these limitations, a photogrammetry-based method has been developed recently to measure the global and localized volume-changes of unsaturated soils during triaxial test. However, this method relies on software to detect coded targets, which often requires tedious manual correction of incorrectly coded target detection information. To address the limitation of the photogrammetry-based method, this study developed a photogrammetric computer vision-based approach for automatic target recognition and 3D reconstruction for volume-changes measurement of unsaturated soils in triaxial tests. Deep learning method was used to improve the accuracy and efficiency of coded target recognition. A photogrammetric computer vision method and ray tracing technique were then developed and validated to reconstruct the three-dimensional models of soil specimen

A novel haptic model and environment for maxillofacial surgical operation planning and manipulation

This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone